Open Access
| Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
|---|---|---|
| Article Number | 10002 | |
| Number of page(s) | 16 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202346010002 | |
| Published online | 11 December 2023 | |
- H. Conrad. Electroplasticity in metals and ceramics. Mater. Sci. Eng. A 287, 276 (2000). https://doi.org/10.1016/S0921-5093(00)00786-3. [CrossRef] [Google Scholar]
- T.A. Perkins, T.J. Kronenberger, J.T. Roth, J. of Manufact. Sci. Eng. 129, 84 (2007). https://doi.Org/10.1115/1.2386164. [CrossRef] [Google Scholar]
- W.A. Salandro, C. Bunget, L. Mears, Energy-based modeling of an electrically- assisted forging process. ASME 2010 Conference 34043 (2010). [Google Scholar]
- X.U. Chun, L.I. Ya-Nan, X. H. Rao, Trans. Nonferrous Met. Soc. China. 24, 3777 (2014) https://doi.org/10.1016/S1003-6326(14)63532-9. [CrossRef] [Google Scholar]
- Y. Zhou, G.O. Chen, X.S. Fu, W.L. Zhou, Trans. Nonferrous Met. Soc. China. 24, 1012 (2014) http://creativecommons.org/licenses/by-nc-nd/3.0/. [CrossRef] [Google Scholar]
- H. Xie, Q. Wang, F. Peng, K. Liu, X. Dong, J. Wang, Trans. Nonferrous Met. Soc. China. 25, 2686 (2015) https://doi.org/10.1016/S1003-6326(15)63892-4 [CrossRef] [Google Scholar]
- T. Lee, J. Magargee, M.K. Ng, J. Cao, Inter. Journal of Plasticity 94, 44 (2017) https://doi.org/10.1016/j.ijplas.2017.02.012. [CrossRef] [Google Scholar]
- A. Subrahmanyam, C. Shivaprasad, G. Suman, D.V. Raju, K.V. Rahul, R.N. Verkata, J. Manuf. Process. 75, 268 (2022) https://doi.org/10.1016/jjmapro.2021.12.027. [CrossRef] [Google Scholar]
- C. Rudolf, R. Goswami, W. Kang, J. Thomas, Acta Mater. 116776, 209 (2021) https://doi.org/10.1016/j.actamat.2021.116776. [Google Scholar]
- H. Xu, X. Liu, Di. Zhang, X. Zhang, J. Mater. Sci. Technol. 35, 1108 (2019) https://doi.org/10.1016/jjmst.2018.12.007. [CrossRef] [Google Scholar]
- S. Zhao, R. Zhang, Y. Chong et al., Nat. Mater. 20, 468 (2021) https://doi.org/10.1038/s41563-020-00817-z. [CrossRef] [PubMed] [Google Scholar]
- M.A. Pakhomov, V.V. Stolyarov, Metal Sci. Heat Treatment 63, 5-6, 236 (2021). https://doi.org/10.1007/s11041-021-00677-7. [CrossRef] [Google Scholar]
- P. Long, J. Phys. Conf. Ser. 1187 (3), 032054 (2019) https://doi.org/10.1088/1742-6596/1187/3/032054. [CrossRef] [Google Scholar]
- D.D. Ben, H.J. Yang, Y.R. Ma, X.H. Shao, J.C. Pang, Z.F. Zhang, Mater. Sci. Eng. A, 725, 28 (2018) https://doi.org/10.1016/j.msea.2018.04.013. [CrossRef] [Google Scholar]
- C. Gennari, L. Pezzato, E. Simonetto, R. Gobbo, M. Forzan, I. Calliari, Investigation of Electroplastic Effect on Four Grades of Duplex Stainless Steels Materials 12, 1911 (2019). https://doi.org/10.3390/ma12121911. [Google Scholar]
- O. Tyc, L. Heller, P. Šittner, Superelasticity 7 (1), 65 (2021) https://doi.org/10.1007/s40830-021-00315-4. [CrossRef] [Google Scholar]
- L. Wang, S.D. Felicelli, and P. Pratt, Sci. Eng., A, 1-2, 234–241, 496 (2008) https://doi.org/10.1016/j.msea.2008.05.044. [CrossRef] [Google Scholar]
- A.M. Popov, Y. Hassan, R.M. Valiyev, S.I. Roshchupkin, Oscillatory Processes in the Cumulative Jet of Disintegrators. AIP Conference Proceedings. International conference on modern trends inmanufacturing technologies and equipment 2021, 2503, 050010 (2022) https://doi.org/10.1063/5O100023. [Google Scholar]
- A. M. Popov, S.M. Muzhichek, M.A. Zaitsev, Journal of Machinery Manufacture and Reliability. ALLERTON PRESS INC, 18 WEST 27TH ST, NY 10001, 7, 611–617. 49, (2020) https://doi.org/10.3103/S1052618820070122. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.