Open Access
Issue
E3S Web Conf.
Volume 476, 2024
The 4th Aceh International Symposium on Civil Engineering (AISCE 2023)
Article Number 01034
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/202447601034
Published online 17 January 2024
  1. OECD, “Global Material Resources Outlook to 2060: Economic Drivers and Environmental Consequences.” Paris: OECD Publishing, 2019. DOI: 10.1787/9789264307452-en. [Google Scholar]
  2. E. Hertwich, R. Lifset, dan N. Heeren, “Resource Efficiency and Climate Change: Material Efficiency Strategies for a Low-Carbon Future.” Nairobi: United Nations Environment Programme, 2020. [Daring]. Tersedia pada: https://www.resourcepanel.org/reports/resource-efficiency-and-climate-change [Google Scholar]
  3. A. Rashad, “Cementitious materials and agricultural wastes as natural fine aggregate replacement in conventional mortar and concrete,” J. Build. Eng., vol. 5, hal. 119–141, 2016, DOI: 10.1016/j.jobe.2015.11.011. [CrossRef] [Google Scholar]
  4. A. Narayanan, A. Mary, G. Hemnath, dan K. Sampaul, “Replacement of fine aggregate with sawdust,” Int. J. Adv. Res. Basic Eng. Sci. Technol., vol. 3, No. 35, hal. 206–210, 2017. [Google Scholar]
  5. I. Prasetia, D. P. Putera, dan A. Y. Pratiwi, “Mechanical performance of mortar and concrete using Borneo wood sawdust as replacement of fine aggregate,” in IOP Conference Series: Earth and Environmental Science, 2022. DOI: 10.1088/1755-1315/999/1/012001. [Google Scholar]
  6. I. Prasetia, M. Syauqi, dan A. S. Aini, “Application of central Kalimantan coal ash as a sustainable construction material,” in IOP Conference Series: Earth and Environmental Science, 2021. DOI: 10.1088/1755-1315/758/1/012011. [Google Scholar]
  7. K. Poorveekan, K. M. S. Ath, A. Anburuvel, dan N. Sathiparan, “Investigation of the engineering properties of cementless stabilized earth blocks with alkali-activated eggshell and rice husk ash as a binder,” Constr. Build. Mater., vol. 277, hal. 122–371, 2021, DOI: 10.1016/j.conbuildmat.2021.122371. [CrossRef] [Google Scholar]
  8. G. Jadhav, K. Bhagwat, G. Amit, dan N. Akshay, “Crushed stone waste as fine aggregate for pumped concrete,” Int. J. Adv. Res. Sci. Eng., vol. 07, No. 04, hal. 593–602, 2018. [Google Scholar]
  9. I. Prasetia dan A. Maulana, “Effects of crushed stone waste as fine aggregate on mortar and concrete properties,” in IOP Conference Series: Materials Science and Engineering, 2019. DOI: 10.1088/1757-899X/620/1/012040. [Google Scholar]
  10. P. Rubio de Hita, F. P. Gálvez, M. J. M. Conde, dan C. R. Liñán, “Reuse of ceramic demolition waste in the reconstruction of planked timber floor slabs,” Open Constr. Build. Technol. J., vol. 11, No. 1, hal. 124–135, 2017, DOI: 10.2174/1874836801711010124. [CrossRef] [Google Scholar]
  11. S. Mahdi, “Prediction of concrete strength in presence of furnace slag and fly ash using hybrid ann-ga (artificial neural network-genetic algorithm),” Smart Struct. Syst., vol. 25, No. 2, hal. 183–195, Feb 2020, DOI: 10.12989/SSS.2020.25.2.183. [Google Scholar]
  12. I. Prasetia dan M. F. Rizani, “Analysis of fly ash from pltu asam-asam as a construction material in terms of its physical and mechanical properties,” MATEC Web Conf., vol. 280, hal. 04013, 2019, DOI: 10.1051/matecconf/201928004013. [CrossRef] [EDP Sciences] [Google Scholar]
  13. I. Prasetia, “The effectiveness of high quality supplementary cementitious materials for mitigating asr expansion in concrete with high alkali content,” Eng. Technol. Appl. Sci. Res., vol. 5, No. 5, hal. 854–859, 2015, [Daring]. Tersedia pada: www.etasr.com [CrossRef] [Google Scholar]
  14. A. Ameli, R. Babagoli, N. Norouzi, F. Jalali, dan F. Poorheydari Mamaghani, “Laboratory evaluation of the effect of coal waste ash (cwa) and rice husk ash (rha) on performance of asphalt mastics and stone matrix asphalt (sma) mixture,” Constr. Build. Mater., vol. 236, hal. 117557, 2020, DOI: 10.1016/j.conbuildmat.2019.117557. [CrossRef] [Google Scholar]
  15. P. G. Kumar dan S. Harika, “Stabilization of expansive subgrade soil by using fly ash,” Mater. Today Proc., vol. 45, no. xxxx, hal. 6558–6562, 2020, DOI: 10.1016/j.matpr.2020.11.469. [Google Scholar]
  16. I. Prasetia dan R. A. Akhbar, “Pengaruh perbedaan kualitas limbah keramik terhadap sifat mekanis blok perkerasan,” Jalan-Jembatan, vol. 40, No. 1, hal. 44–53, 2023, [Daring]. Tersedia pada: https://binamarga.pu.go.id/jurnal/index.php/jurnaljalanjembatan/article/view/1174 [Google Scholar]
  17. L. G. Li, Z. Y. Zhuo, J. Zhu, dan A. K. H. Kwan, “Adding ceramic polishing waste as paste substitute to improve sulphate and shrinkage resistances of mortar,” Powder Technol., vol. 362, hal. 149–156, 2020, DOI: 10.1016/j.powtec.2019.11.117. [CrossRef] [Google Scholar]
  18. A. Ghosh, A. Ghosh, dan S. Neogi, “Reuse of fly ash and bottom ash in mortars with improved thermal conductivity performance for buildings,” Heliyon, vol. 4, No. 11, hal. e00934, 2018, DOI: 10.1016/j.heliyon.2018.e00934. [Google Scholar]
  19. A. Y. Pratiwi, I. Prasetia, M. Yahya, dan R. Effendi, “Investigation of enhancing industrial waste as a soft soil stabilizer,” IOP Conf. Ser. Earth Environ. Sci., vol. 999, No. 1, hal. 0–6, 2022, DOI: 10.1088/1755-1315/999/1/012029. [Google Scholar]
  20. A. R. Patil dan S. B. Sathe, “Feasibility of sustainable construction materials for concrete paving blocks: a review on waste foundry sand and other materials,” Mater. Today Proc., vol. 43, no. xxxx, hal. 1552–1561, 2020, DOI: 10.1016/j.matpr.2020.09.402. [Google Scholar]
  21. R. K. Majhi dan A. N. Nayak, “Properties of concrete incorporating coal fly ash and coal bottom ash,” J. Inst. Eng. Ser. A, vol. 100, No. 3, hal. 459–469, 2019, DOI: 10.1007/s40030-019-00374-y. [CrossRef] [Google Scholar]
  22. T. Vachal, R. Sulc, dan M. Sofron, “Modification of selected fly ash for use in concrete,” AIP Conf. Proc., vol. 2322, no. February, 2021, DOI: 10.1063/5.0042038. [Google Scholar]
  23. PT. PLN (PERSERO), “Rencana usaha penyediaan tenaga listrik (ruptl) pt pln (persero) 2021-2030.,” 2021. [Google Scholar]
  24. F. Anggara, H. T. B. M. Petrus, D. A. A. Besari, H. Manurung, dan F. Y. A. Saputra, “Tinjauan pustaka karakterisasi dan potensi pemanfaatan fly ash dan bottom ash (faba),” Bul. Sumber Daya Geol., vol. 16, No. 1, hal. 53–70, 2021. [CrossRef] [Google Scholar]
  25. PLTU Asam-Asam, “Laporan klasifikasi kelas, rencana program, dan rencana biaya pengelolaan fly ash dan bottom ash,” Pelaihari, 2018. [Google Scholar]
  26. K. Dhiman dan R. Kumar, “AN experimental study on the strength characteristics of concrete using crushed stone dust as fine aggregate,” Int. J. Eng. Res. Manag. Stud., vol. 4, No. 3, hal. 43–48, 2017. [Google Scholar]
  27. D. Sulistyoini, D. Langga, C. Galuh, dan M. Azizan, “The compressive strength of fly ash and stone dush in concrete,” Hal. 31–35, 2022. [Google Scholar]
  28. Mariamah, N. Chairunnisa, dan R. Nurwidayati, “The effect of natrium hydroxide molarity variation and alkali ratio on the compressive strength of geopolymer paste and mortar,” IOP Conf. Ser. Earth Environ. Sci., vol. 1184, No. 1, hal. 012025, 2023, DOI: 10.1088/1755-1315/1184/1/012025. [CrossRef] [Google Scholar]
  29. Indonesia, “Metode Pengujian Kekuatan Tekan Mortar Semen Portland Untuk Pekerjaan Sipil, SNI 03-6825-2002.” Jakarta: BSN, 2002, hal. 1–9. [Google Scholar]
  30. S. H. Kosmatka dan M. L. Wilson, “Design and Control of Concrete Mixtures,” 15th ed. Skokie, Illinois, USA: Portland Cement Association, 2011. [Google Scholar]
  31. M. A. Caronge, M. W. Tjaronge, H. Hamada, dan R. Irmawaty, “Effect of water curing duration on strength behaviour of portland composite cement (pcc) mortar,” IOP Conf. Ser. Mater. Sci. Eng., vol. 271, No. 1, 2017, DOI: 10.1088/1757-899X/271/1/012018. [CrossRef] [Google Scholar]
  32. J. Kubica dan I. Galman, “Investigations on flexural and compressive strengths of mortar dedicated to clinker units—influence of mixing water content and curing time,” Materials (Basel)., vol. 15, No. 1, 2022, DOI: 10.3390/ma15010347. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.