EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 476 (2024) E3S Web Conf., 476 (2024) 01052 References
Open Access
Issue
E3S Web Conf.
Volume 476, 2024
The 4th Aceh International Symposium on Civil Engineering (AISCE 2023)
Article Number 01052
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202447601052
Published online 17 January 2024
  1. Y. R. Alkhaly, “Perbandingan rancangan campuran beton berdasarkan SNI 03-2834-2000 dan SNI 7656:2012 pada mutu beton 20 MPa,” Teras Jurnal, vol. 6, No. 1, 2016 [Google Scholar]
  2. I. K. Ejiogu, P. A. Mamza, P. O. Nkeonye dan A. S. Yaro, “Comparative study of various methods for designing and proportioning normal concrete mixture,” The Pacific J. of Sci and Tech, vol. 19, No. 1, 2018 [Google Scholar]
  3. BSN, SNI 03-2834-2000. Tata Cara Pembuatan Rencana Beton Normal, 2000 [Google Scholar]
  4. BSN, SNI 7656: 2012. Tata cara pemilihan campuran untuk beton normal, beton berat dan beton massa, 2012. [Google Scholar]
  5. I. Setiawan, Suhendra, R. Zulfiati, “Perbandingan Peningkatan Kuat Tekan Beton Normal Dengan Menggunakan SNI 03-2834-2000 dan SNI 7656:2012 Sampai Umur 28 Hari,” Jurnal Talenta Sipil, vol. 4, No. 2, 2021. [Google Scholar]
  6. A. Arman, “Kajian kuat tekan beton normal menggunakan standar SNI 7656-2012 dan ASTM C 136-06,” Rang Teknik Journal, vol 1, No. 2, 2018. [CrossRef] [Google Scholar]
  7. Revansiddappa, R. Gopi, R. Saravanakumar, S. Dineshkumar, S. Saravanaganesh dan A. Chandrasekar, “Cost assessment of different grades of concrete by different mix design methods,” J. of Critical Reviews, vol. 7, No. 12, 2020 [Google Scholar]
  8. W. Kushartomo dan D. P. Sari, “Sifat mekanis beton normal dengan campuran tepung marmer,” Media Komunikasi Teknik Sipil, vol. 24, No. 1, 2018 [Google Scholar]
  9. E. K. Pangestuti, S. Handayani, M. Purnomo, D. C. Silitonga, M. H. Fathoni, “The use of fly ash as additive material to high strength concrete,” Jurnal Teknik Sipil & Perencanaan, vol. 20, No. 2, 2018 [Google Scholar]
  10. N. Pertiwi, “Pengaruh Gradasi Agregat terhadap Karakteristik Beton Segar,” Jurnal Forum Bangunan, vol. 12, No. 1, 2014 [Google Scholar]
  11. J. Ximenes, C. Jesus, J. Aguiar, dan J. Pais, “Mix design and physical and mechanical properties of pervious concretes,” Mater de Constr, vol. 72, No. 348, 2022. [Google Scholar]
  12. A. P. N. Siregar, N. Idha dan I. W. Suarnita, “Pengaruh penggunaan gradasi agregat berbasis sni 03-2834-2000 dalam campuran beton terhadap kuat tekan dan fracture toughness beton,” Jurnal Teknik Sipil, vol. 27, No. 1, 2020 [Google Scholar]
  13. A. E. Lianasari dan R. P. Siahaan, “Perilaku lentur balok beton bertulang high volume fly ash (HVFA) dengan variasi ukuran butir maksimum agregat,” Jurnal Teknik Sipil, vol. 15, No. 2, 2019 [Google Scholar]
  14. A. Demissew, “Comparative analysis of selected concrete mix design methods based on cost-effectiveness”, Adv. in Civil Eng., vol. 2022, article ID 4240774, 2022. https://doi.org/10.1155/2022/4240774 [CrossRef] [Google Scholar]
  15. E. Desmaliana, Hazairin, B. Herbudiman, R. Lesmana, “Kajian eksperimental sifat mekanik beton porous dengan variasi factor air semen,” Jurnal Teknik Sipil, vol. 15, No. 1, 2018 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.