EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 477 (2024) E3S Web Conf., 477 (2024) 00007 References
Open Access
Issue
E3S Web Conf.
Volume 477, 2024
International Conference on Smart Technologies and Applied Research (STAR'2023)
Article Number 00007
Number of page(s) 15
DOI https://doi.org/10.1051/e3sconf/202447700007
Published online 16 January 2024
  1. Amir, A.L.; Ishak, M.R.; Yidris, N.; Zuhri, M.Y.M.; Asyraf, M.R.M. Potential of honeycomb- filled composite structure in composite cross-arm component: A review on recent progress and its mechanical properties. Polymers (Basel). 2021, 13, doi:10.3390/polym13081341. [CrossRef] [Google Scholar]
  2. Abdullah, N.; Hatta, N.M. Cloud-to-ground lightning occurrences in Peninsular Malaysia and its use in improvement of distribution line lightning performances. PECon 2012 - 2012 IEEE Int. Conf. Power Energy 2012, 819–822, doi: 10.1109/PECon.2012.6450330. [Google Scholar]
  3. Amir, A.L.; Ishak, M.R.; Yidris, N.; Zuhri, M.Y.M.; Asyraf, M.R.M. Advances of composite cross arms with incorporation of material core structures: Manufacturability, recent progress and views. J. Mater. Res. Technol. 2021, 13, 1115–1131, doi: 10.1016/j.jmrt.2021.05.040. [CrossRef] [Google Scholar]
  4. Asyraf, M.R.M.; Rafidah, M.; Ishak, M.R.; Sapuan, S.M.; Yidris, N.; Ilyas, R.A.; Razman, M.R. Integration of TRIZ, morphological chart and ANP method for development of FRP composite portable fire extinguisher. Polym. Compos. 2020, 41, 2917–2932, doi: 10.1002/pc.25587. [CrossRef] [Google Scholar]
  5. Liu, T.Q.; Liu, X.; Feng, P. A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects. Compos. Part B Eng. 2020, 191, doi: 10.1016/j.compositesb.2020.107958. [Google Scholar]
  6. Ozbakkaloglu, T.; Lim, J.C.; Vincent, T. FRP-confined concrete in circular sections: Review and assessment of stress-strain models. Eng. Struct. 2013, 49, 1068–1088, doi: 10.1016/j.engstruct.2012.06.010. [CrossRef] [Google Scholar]
  7. Zhang, Y.; Sun, L.; Li, L.; Huang, B.; Wang, T.; Wang, Y. Direct injection molding and mechanical properties of high strength steel/composite hybrids. Compos. Struct. 2019, 210, 70–81, doi: 10.1016/j.compstruct.2018.11.035. [CrossRef] [Google Scholar]
  8. Forintos, N.; Czigany, T. Multifunctional application of carbon fiber reinforced polymer composites: Electrical properties of the reinforcing carbon fibers – A short review. Compos. Part B Eng. 2019, 162, 331–343, doi: 10.1016/j.compositesb.2018.10.098. [CrossRef] [Google Scholar]
  9. Mohamad, D.; Syamsir, A.; Beddu, S.; Abas, A.; Ng, F.C.; Razali, M.F.; Seman, S.A.H.A. Numerical Study of Composite Fiberglass Cross Arms under Statics Loading and Improvement with Sleeve Installation. In Proceedings of the IOP Conference Series: Materials Science and Engineering; 2019; Vol. 530. [Google Scholar]
  10. Mohamad, D.; Beddu, S.; Syamsir, A.; Zahari, N.M.; Razali, M.F.; Abu Seman, S.A.H.; Abas, A.; Ng, F.C. Failure analysis of various fiberglass cross-arm designs under multi-axial loading. In Proceedings of the IOP Conference Series: Materials Science and Engineering; 2020; Vol. 920. [Google Scholar]
  11. S.A.H.A. Numerical Simulation on the Statics Deformation Study of Composite Cross Arms of Different Materials and Configurations. In Proceedings of the IOP Conference Series: Materials Science and Engineering; 2019; Vol. 530. [Google Scholar]
  12. Ang, J.Y.; Abdul Majid, M.S.; Mohd Nor, A.; Yaacob, S.; Ridzuan, M.J.M. First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model. Compos. Struct. 2018, 200, 579–588, doi: 10.1016/j.compstruct.2018.05.139. [CrossRef] [Google Scholar]
  13. Mohamad, D.; Syamsir, A.; Sa’Don, S.N.; Zahari, N.M.; Seman, S.A.H.A.; Razali, M.F.; Abas, A.; Ng, F.C. Stacking Sequence Effects on Performance of Composite Laminate Structure Subjected to Multi-Axial Quasi-Static Loading. In Proceedings of the IOP Conference Series: Materials Science and Engineering; 2019; Vol. 530. [Google Scholar]
  14. Mohamad, D.; Syamsir, A.; Beddu, S.; Kamal, N.L.M.; Zainoodin, M.M.; Razali, M.F.; Abas, A.; Seman, S.A.H.A.; Ng, F.C. Effect of Laminate Properties on the Failure of Cross Arm Structure under Multi-Axial Load. In Proceedings of the IOP Conference Series: Materials Science and Engineering; 2019; Vol. 530. [Google Scholar]
  15. Russell, B.P.; Deshpande, V.S.; Wadley, H.N.G. Quasistatic deformation and failure modes of composite square honeycombs. J. Mech. Mater. Struct. 2008, 3, 1315–1340, doi: 10.2140/jomms.2008.3.1315. [CrossRef] [Google Scholar]
  16. Singhal, D.; Narayanamurthy, V. Large and Small Deflection Analysis of a Cantilever Beam. J. Inst. Eng. Ser. A 2019, 100, 83–96, doi: 10.1007/s40030-018-0342-3. [CrossRef] [Google Scholar]
  17. Nallathambi, A.K.; Lakshmana Rao, C.; Srinivasan, S.M. Large deflection of constant curvature cantilever beam under follower load. Int. J. Mech. Sci. 2010, 52, 440–445, doi: 10.1016/j.ijmecsci.2009.11.004. [CrossRef] [Google Scholar]
  18. Zeng, W.; Yan, J.; Hong, Y.; Cheng, S.S. Numerical analysis of large deflection of the cantilever beam subjected to a force pointing at a fixed point. Appl. Math. Model. 2021, 92, 719–730, doi: 10.1016/j.apm.2020.11.023. [CrossRef] [Google Scholar]
  19. Wang, T.M. Nonlinear bending of beams with concentrated loads. J. Franklin Inst. 1968, 285, 386–390, doi: 10.1016/0016-0032(68)90486-9. [CrossRef] [Google Scholar]
  20. Tari, H. On the parametric large deflection study of Euler-Bernoulli cantilever beams subjected to combined tip point loading. Int. J. Non. Linear. Mech. 2013, 49, 90–99, doi: 10.1016/j.ijnonlinmec.2012.09.004. [CrossRef] [Google Scholar]
  21. Beléndez, T.; Neipp, C.; Beléndez, A. Numerical and Experimental Analysis of a Cantilever Beam: A Laboratory Project to Introduce Geometric Nonlinearity in Mechanics of Materials. Int. J. Eng. Educ. 2003, 19, 885–892. [Google Scholar]
  22. Aniskevich, K.; Aniskevich, A.; Arnautov, A.; Jansons, J. Mechanical properties of pultruded glass fiber-reinforced plastic after moistening. Compos. Struct. 2012, 94, 2914–2919, doi: 10.1016/j.compstruct.2012.04.030. [CrossRef] [Google Scholar]
  23. Shindo, Y.; Takeda, T.; Narita, F.; Saito, N.; Watanabe, S.; Sanada, K. Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures. Compos. Sci. Technol. 2009, 69, 1904–1911, doi: 10.1016/j.compscitech.2009.04.010. [CrossRef] [Google Scholar]
  24. Fu, H.; Dun, M.; Wang, H.; Wang, W.; Ou, R.; Wang, Y.; Liu, T.; Wang, Q. Creep response of wood flour-high-density polyethylene/laminated veneer lumber coextruded composites. Constr. Build. Mater. 2020, 237, doi: 10.1016/j.conbuildmat.2019.117499. [CrossRef] [Google Scholar]
  25. Asyraf, M.R.M.; Ishak, M.R.; Sapuan, S.M.; Yidris, N.; Shahroze, R.M.; Johari, A.N.; Rafidah, M.; Ilyas, R.A. Creep test rig for cantilever beam: fundamentals, prospects and present views. J. Mech. Eng. Sci. 2020, 14, 6869–6887, doi: 10.15282/jmes.14.2.2020.26.0538. [CrossRef] [Google Scholar]
  26. Beléndez, T.; Neipp, C.; Beléndez, A. Large and small deflections of a cantilever beam. Eur. J. Phys. 2002, 23, 371–379, doi: 10.1088/0143-0807/23/3/317. [CrossRef] [Google Scholar]
  27. Mohamad, D.; Beddu, S.; Syamsir, A.; Zahari, N.M.; Abu Seman, S.A.H.; Razali, M.F.; Abas, A.; Ng, F.C. Performance Evaluation of Composite Cross-Arm Structure under Different Magnitude of Loading. In Proceedings of the IOP Conference Series: Materials Science and Engineering; 2020; Vol. 920. [Google Scholar]
  28. Feynman, R.P. Feynman lectures on physics. Volume 2: Mainly electromagnetism and matter. In American Journal of Physics; Addison-Wesley Pub (Sd), 1964; Vol. 33, p. 750 ISBN 9780201020113. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.