Open Access
Issue
E3S Web Conf.
Volume 572, 2024
2024 The 7th International Conference on Renewable Energy and Environment Engineering (REEE 2024)
Article Number 01006
Number of page(s) 7
Section Performance Analysis and Optimization of Solar and Wind Power Generation Systems
DOI https://doi.org/10.1051/e3sconf/202457201006
Published online 27 September 2024
  1. A. Staino and B. Basu, “Emerging trends in vibration control of wind turbines: A focus on a dual control strategy,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 373, no. 2035, Feb. 2015, doi: 10.1098/rsta.2014.0069. [Google Scholar]
  2. F. Xiao, C. Tian, I. Wait, Z. Yang, B. Still, and G. S. Chen, “Condition monitoring and vibration analysis of wind turbine,” Advances in Mechanical Engineering, vol. 12, no. 3, Mar. 2020, doi: 10.1177/1687814020913782. [Google Scholar]
  3. X. Escaler and T. Mebarki, “Full-scale wind turbine vibration signature analysis,” Machines, vol. 6, no. 4, 2018, doi: 10.3390/MACHINES6040063 [CrossRef] [Google Scholar]
  4. A. Kusiak and Z. Zhang, “Analysis of wind turbine vibrations based on SCADA data,” Journal of Solar Energy Engineering, Transactions of the ASME, vol. 132, no. 3, pp. 0310081–03100812, Aug. 2010, doi: 10.1115/1.4001461. [CrossRef] [Google Scholar]
  5. B. Corley, J. Carroll, and A. McDonald, “Fault detection of wind turbine gearbox using thermal network modelling and SCADA data,” in Journal of Physics: Conference Series, IOP Publishing Ltd, Sep. 2020, doi: 10.1088/1742-6596/1618/2/022042. [Google Scholar]
  6. P. W. Khan, C. Y. Yeun, and Y. C. Byun, “Fault detection of wind turbines using SCADA data and genetic algorithm-based ensemble learning,” Eng Fail Anal, vol. 148, Jun. 2023, doi: 10.1016/j.engfailanal.2023.107209. [Google Scholar]
  7. W. Yang, P. J. Tavner, and M. R. Wilkinson, “Condition monitoring and fault diagnosis of a wind turbine synchronous generator drive train,” IET Renewable Power Generation, vol. 3, no. 1, pp. 1–11, 2009, doi: 10.1049/iet-rpg:20080006. [CrossRef] [Google Scholar]
  8. X. Dong, J. Lian, H. Wang, T. Yu, and Y. Zhao, “Structural vibration monitoring and operational modal analysis of offshore wind turbine structure,” Ocean Engineering, vol. 150, pp. 280–297, Feb. 2018, doi: 10.1016/j.oceaneng.2017.12.052. [CrossRef] [Google Scholar]
  9. G. Shen, D. Xiang, K. Zhu, L. Jiang, Y. Shen, and Y. Li, “Fatigue failure mechanism of planetary gear train for wind turbine gearbox,” Eng Fail Anal, vol. 87, pp. 96–110, May 2018, doi: 10.1016/j.engfailanal.2018.01.007. [CrossRef] [Google Scholar]
  10. A. Abouhnik and A. Albarbar, “Wind turbine blades condition assessment based on vibration measurements and the level of an empirically decomposed feature,” in Energy Conversion and Management, Dec. 2012, pp. 606–613, doi: 10.1016/j.enconman.2012.06.008. [CrossRef] [Google Scholar]
  11. B. Tang, W. Liu, and T. Song, “Wind turbine fault diagnosis based on Morlet wavelet transformation and Wigner-Ville distribution,” Renew Energy, vol. 35, no. 12, pp. 2862–2866, Dec. 2010, doi: 10.1016/j.renene.2010.05.012. [CrossRef] [Google Scholar]
  12. C. Changenet and M.Pasquier, “ Power losses and heat exchange in reduction gears: Numerical and Experimental results,” VDI Berichte, 2002. [Google Scholar]
  13. B. Y. Dagli, Y. Tuskan, and Ü. Gökkuş, “Evaluation of Offshore Wind Turbine Tower Dynamics with Numerical Analysis,” Advances in Civil Engineering, vol. 2018, 2018, doi: 10.1155/2018/3054851. [CrossRef] [Google Scholar]
  14. P. H. Jain and S. P. Bhosle, “A Review on Vibration Signal Analysis Techniques Used for Detection of Rolling Element Bearing Defects,” International Journal of Mechanical Engineering, vol. 8, no. 1, pp. 14–29, Jan. 2021, doi: 10.14445/23488360/ijme-v8i1p103.S. [CrossRef] [Google Scholar]
  15. A. McInerny and Y. Dai, “Basic vibration signal processing for bearing fault detection,” IEEE Transactions on Education, vol. 46, no. 1, pp. 149–156, Feb. 2003, doi: 10.1109/TE.2002.808234. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.