EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 582 (2024) E3S Web Conf., 582 (2024) 01005 References
Open Access
Issue
E3S Web Conf.
Volume 582, 2024
1st International Conference on Materials Sciences and Mechatronics for Sustainable Energy and the Environment (MSMS2E 2024)
Article Number 01005
Number of page(s) 9
Section Sustainable and Renewable Energy
DOI https://doi.org/10.1051/e3sconf/202458201005
Published online 22 October 2024
  1. M. Wakil, H. El Mghari, S. Idrissi Kaitouni, R. El Amraoui, Thermal energy performance of compressed earth building in two different cities in Moroccan semi-arid climate. Energy Built Environ. (2023). https://doi.org/10.1016/J.ENBENV.2023.06.008. [Google Scholar]
  2. Ú. Cárdenas-Mamani, R. Kahhat, I. Vázquez-Rowe, District-level analysis for household-related energy consumption and greenhouse gas emissions: A case study in Lima, Peru. Sustain. Cities Soc. 77, 103572 (2022). https://doi.org/10.1016/J.SCS.2021.103572. [CrossRef] [Google Scholar]
  3. K. El Azhary, Y. Chihab, M. Mansour, N. Laaroussi, M. Garoum, Energy efficiency and thermal properties of the composite material clay-straw. Energy Procedia 141, 160–164 (2017). https://doi.org/10.1016/J.EGYPRO.2017.11.030. [CrossRef] [Google Scholar]
  4. S. H. Sameh, Promoting earth architecture as a sustainable construction technique in Egypt. J. Clean Prod. 65, 362–373 (2014). https://doi.org/10.1016/J.JCLEPRO.2013.08.046. [CrossRef] [Google Scholar]
  5. Y. Bahammou, M. Kouhila, Z. Tagnamas, H. Lamsyehe, A. Lamharrar, A. Idlimam, Hygroscopic behavior of water absorbed by capillarity and stabilization of a biocomposite building material: Clay reinforced with Chamarrops humilis fibers. Int. Commun. Heat Mass Transf. 135, 106077 (2022). https://doi.org/10.1016/J.ICHEATMASSTRANSFER.2022.106077. [CrossRef] [Google Scholar]
  6. Y. Azalam, A. Alioui, N. Al Armouzi, M. Benfars, M. Mabrouki, E. M. Bendada, Physical and mechanical properties of adobe bricks reinforced by natural additives, a case study of alfalfa fibers. EUREKA Phys. Eng. 2024, 144–159 (2024). https://doi.org/10.21303/2461-4262.2024.003426. [CrossRef] [Google Scholar]
  7. L. Shashua-Bar, I. X. Tsiros, M. Hoffman, Passive cooling design options to ameliorate thermal comfort in urban streets of a Mediterranean climate (Athens) under hot summer conditions. Build. Environ. 57, 110–119 (2012). https://doi.org/10.1016/J.BUILDENV.2012.04.019. [CrossRef] [Google Scholar]
  8. S. Charoenkit, S. Yiemwattana, Living walls and their contribution to improved thermal comfort and carbon emission reduction: A review. Build. Environ. 105, 82–94 (2016). https://doi.org/10.1016/J.BUILDENV.2016.05.031. [CrossRef] [Google Scholar]
  9. A. E. Losini, A. C. Grillet, M. Bellotto, M. Woloszyn, G. Dotelli, Natural additives and biopolymers for raw earth construction stabilization – a review. Constr. Build. Mater. 304, 124507 (2021). https://doi.org/10.1016/J.CONBUILDMAT.2021.124507. [CrossRef] [Google Scholar]
  10. A. Mellaikhafi, A. Tilioua, A. Benallel, Thermal performance assessment of a wall built with earth-based adobes and reinforced with pinnate leaves fibers. Mater. Today Proc. 58, 1535–1540 (2022). https://doi.org/10.1016/J.MATPR.2022.03.296. [CrossRef] [Google Scholar]
  11. A. Alioui, S. Idrissi Kaitouni, Y. Azalam, N. Al Armouzi, E. M. Bendada, M. Mabrouki, Effect of straw fibers addition on hygrothermal and mechanical properties of carbonfree adobe bricks: From material to building scale in a semi-arid climate. Build. Environ. 255, 111380 (2024). https://doi.org/10.1016/J.BUILDENV.2024.111380. [CrossRef] [Google Scholar]
  12. Règlement Thermique de Construction au Maroc. Accessed: Aug. 20, 2023. https://www.amee.ma/sites/default/files/inline-files/Reglement_thermique_de_construction_au_Maroc.pdf. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.