Open Access
Issue |
E3S Web Conf.
Volume 583, 2024
Innovative Technologies for Environmental Science and Energetics (ITESE-2024)
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 7 | |
Section | Oil, Gas, and Fuel Research and Applications | |
DOI | https://doi.org/10.1051/e3sconf/202458303001 | |
Published online | 25 October 2024 |
- A. V. Vasilyev, L. R. Khamidullova, Vector of Science of Tolyatti State University 4, 45-49 (2011) [Google Scholar]
- A. N. Tileuberdi, S. T. Tleuova, Zh. A. Shingisbaeva, et al., Analysis of the environmental impact of metallurgy waste on the environment, in Proceeding of the XXX All-Russian scientific and practical conference “Scientific and educational discussions: fundamental and applied research”. In 2 parts, 14 April 2021, Rostov -on- Don, Southern University (IUBiP), VVM Publishing House LLC, pp. 44-49 (2021) [Google Scholar]
- V. A. Dronchenko, Methods for reducing the harmful effects of waste cutting fluids on the environment, in Proceedings of the International Scientific and Technical Conference “Innovative Technologies in Mechanical Engineering” dedicated to the 100th anniversary of academician P. I. Yashcheritsyn and the 40th anniversary of the Faculty of Mechanical Engineering of PSU, Novopolotsk, 28-29 October 2015, under the general editorship of A. I. Gordienko, V. K. Shelega. Novopolotsk, Educational Institution “Polotsk State University”, pp. 75-78 (2015) [Google Scholar]
- S. G. Entelisa, E. M. Berliner (eds.), Lubricating and cooling technological means for metal cutting: handbook (Mashinostroenie, Moscow, 1986) [Google Scholar]
- D. Sh. Ualiev, Zh. K. Shaimanova, G. L. Tattinbek, Science, Technology and Education 5(5), 72-74, 68 (2014) [Google Scholar]
- L. V. Khudobin, A. P. Babichev, E. M. Bulyzhev, et al., Lubricating and cooling technological means and their use in cutting: handbook. Under. ed. L. V. Khudobina (Mashinostroenie, Moscow, 2006) [Google Scholar]
- T. F. Mullagaliev, D. S. Mikhai, S. V. Mikhailova, On the issue of environmental safety in the oil industry, in Proceedings of the International Scientific and Practical Conference “Innovative Processes in Science, Technology and Economics” At 2 o’clock, Nizhnevartovsk, 21-22 April 2022. Volume Part II, Tyumen, Tyumen Industrial University, pp. 211-214 (2022) [Google Scholar]
- A. Chaltsev, A. Sorokin, Machine Tool 2, 57–59 (2016) [Google Scholar]
- A. M. Kuzminskaya, M. V. Buzaeva, Improvement of environmental and operational characteristics of gasoline with the introduction of surfactants, in Proceedings of the VIII All-Russian Scientific and Practical Conference with international participation “Actual problems of Chemistry, Biotechnology and the Service Sector”, 25-26 April 2024, Irkutsk, Irkutsk National Research Technical University, pp. 146-149 (2024) [Google Scholar]
- A. M. Kuzminskaya, M. V. Buzaeva, Environmental aspects of the use of fuel additives, in Proceedings of the IV International Scientific and Practical Conference of students, postgraduates, young scientists, teachers: collection of scientific papers “Materials technologies”, Ulyanovsk, 21-22 November 2023, Ulyanovsk, Ulyanovsk State Technical University, pp. 71-73 (2024) [Google Scholar]
- A. N. Golitsyn, A. N. Golitsyn, Industrial ecology and monitoring of environmental pollution: a textbook for students of secondary vocational education institutions, 2nd ed. (Onyx, Moscow, 2010) [Google Scholar]
- I. A. Pogrebnaya, Yu. I. Kazarinov, S. V. Mikhailova, Hydraulics and hydraulic pneumatic drives of transport and transport-technological machines and equipment: a textbook for students of bachelor’s degree 23.03.03 - Operation of transport-technological machines and complexes (Publishing house “Znanie-M”, Moscow, 2021) [Google Scholar]
- V. V. Zabolotskikh, A. V. Vasiliev, Monitoring of toxic effects on the environment using bioindication and biotesting methods: monograph (Publishing House of the Samara Scientific Center of the Russian Academy of Sciences, Samara, 2012) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.