EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 588 (2024) E3S Web Conf., 588 (2024) 03024 References
Open Access
Issue
E3S Web Conf.
Volume 588, 2024
Euro-Asian Conference on Sustainable Nanotechnology, Environment, & Energy (SNE2-2024)
Article Number 03024
Number of page(s) 11
Section Functional Materials and their Applications
DOI https://doi.org/10.1051/e3sconf/202458803024
Published online 08 November 2024
  1. N. Thirumalaivasan, S. Gopi, K. Karthik, S. Nangan, K. Kanagaraj and S. Rajendran, Nano-PCM materials: Bridging the gap in energy storage under fluctuating environmental conditions. Process Saf. Environ. Prot., 189, 1003-1021(2024). https://doi.org/10.1016/j.psep.2024.06.079 [CrossRef] [Google Scholar]
  2. T. Raja, D. Yuvarajan, V. Sundaram, S. Vidhya Lakshmi, V.P. Veeraragavan, Impact of Bran Filler Amount on Flax Fiber Reinforced Epoxy Composite - Mechanical and Thermal Properties for Secondary Structural Applications, SSRG Int. J. Mech. Eng., 11 (2), 16-23(2024). https://doi.org/10.14445/23488360/IJME-V11I2P102 [Google Scholar]
  3. Ramesh G, Uvaraja VC, Gnanasundara Jayaraja B, Patil PP. Fatigue, fracture toughness and DMA of biosilica toughened epoxy with stacked okra fiber and Al 2024‐T3 fiber metal laminate composite. Polymer Composites. 2022 Sep;43(9):6300-9. [CrossRef] [Google Scholar]
  4. Li, X., Tabil, L. G., & Panigrahi, S. (2007). Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review. J. Polym. Environ., 15(1), 25-33. [CrossRef] [Google Scholar]
  5. S. Nangan, K. Kanagaraj, G. Kaarthikeyan, A. Kumar, M. Ubaidullah, B. Pandit, R. Govindasamy and T. Natesan, Sustainable preparation of luminescent carbon dots from syringe waste and hyaluronic acid for cellular imaging and antimicrobial applications. Environ. Res., 237, 116990(2023). https://doi.org/10.1016/j.envres.2023.116990 [CrossRef] [Google Scholar]
  6. J. Manjunathan, M. Revathi, H. Sowmya, S. Meenambiga, R. Sudha, B. Prakash, S. Nangan, L. Gnanasekaran and N. Thirumalaivasan, Recent advancements in nanotechnological approaches for pollution monitoring and environmental sustainability. Clean Technol. Environ. Policy, 1-17(2023). https://doi.org/10.1007/s10098-023-02676-z [Google Scholar]
  7. T. Raja, Y. Devarajan, K. Logesh, C. Muniraju, V. K. Pandey and G. Dhanraj, Testing and Evaluation of Hybrid Polymer Composites Reinforced with Moringa oleifera and Boehmeria nivea Fibers, Embedded with Copper Oxide Particulates, for Thermal, Structural, and Biological Properties. J. Test. Eval., 52, 2401-2414(2024). https://doi.org/10.1520/JTE20230506 [CrossRef] [Google Scholar]
  8. A. Nair, K. Kuppusamy, S. Nangan, T. Natesan, J. T. Haponiuk, S. Thomas, R. Ramasubburayan, L. Gnanasekaran, M. Selvaraj and S. Gopi, Multifunctional natural derived carbon quantum dots from Withania somnifera (L.) – Antiviral activities against SARS-CoV-2 pseudoviron. Environ. Res., 239, 117366(2023). https://doi.org/10.1016/j.envres.2023.117366. [CrossRef] [Google Scholar]
  9. Jawaid, M., & Abdul Khalil, H. P. S. (2011). Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review. Carbohydr. Polym., 86(1), 1-18. [CrossRef] [Google Scholar]
  10. N. Thirumalaivasan, S. Mahapatra, G. Ramanathan, A. Kumar, T. Raja, M. Muthuramamoorthy, B. Pandit, S. Pandiaraj and S. Prakash, exploring antimicrobial and biocompatible applications of eco-friendly fluorescent carbon dots derived from fast-food packaging waste transformation. Environ. Res., 244, 117888(2024). https://doi.org/10.1016/j.envres.2023.117888 [CrossRef] [Google Scholar]
  11. T. Raja and D. Yuvarajan, Study on the Characteristics of Novel Natural Fiber Extracted from Crescentia cujete Plant Fruits—An Alternate Reinforcement for Synthetic Materials. J. Inst. Eng. (India) Ser. D, 1- 9(2024). https://doi.org/10.1007/s40033-024-00737-1 [Google Scholar]
  12. R. Thandavamoorthy and Y. Devarajan, Study on the characteristics of Napier grass fibre reinforced porcelain filler particulates poly lactic acid matrix biocomposite. J. Reinf. Plast. Compos. 07316844241253912(2024). https://doi.org/10.1177/07316844241253912 [Google Scholar]
  13. K. Aryamol, K. Kanagaraj, S. Nangan, J. T. Haponiuk, M. Okhawilai, S. Pandiaraj, M. B. Hanif, A. N. Alodhayb, S. Thomas and N. Thirumalaivasan, Recent Advances of carbon Pathways for Sustainable Environment development. Environ. Res., 250, 118513(2024). https://doi.org/10.1016/j.envres.2024.118513 [Google Scholar]
  14. T. Raja, M. N. Ali, M. E. Shashi Kumar, G. R. Vishal, V. Manikanth, M. E. Mohammad Soudagar, A. Chinnathambi and T. A. Alahmadi, Study on the characteristics of novel natural fiber extracted from Coccinia grandis plant vine: a novel material for engineering applications. Int J Adv Manuf Technol, 1-8(2024). https://doi.org/10.1007/s00170-024-13967-0 [Google Scholar]
  15. N. Thirumalaivasan, K. Kanagaraj, K. Logesh, S. Chandrasekaran, S. Kumar, R. Subramanian, N. Senthilkumar, A. Kumar, V. J. Angadi and A. A. Al-Kahtani, exploring luminescent carbon dots derived from syrup bottle waste and curcumin for potential antimicrobial and bioimaging applications. Chemosphere, 354, 141592(2024). https://doi.org/10.1016/j.chemosphere.2024.141592 [CrossRef] [PubMed] [Google Scholar]
  16. A. Maria Joseph, S. Nangan, D. Verma, L. Gnanasekaran, S. Rajendran, T. Natesan, P. Pattananuwat and M. Okhawilai, Rational coupling of selective electrochemical oxidation and reduction reactions for in-situ value-added chemical generation. Fuel, 367, 131408(2024). https://doi.org/10.1016/j.fuel.2024.131408 [Google Scholar]
  17. T. Raja and Y. Devarajan, Thermal evaluation of porcelain filler particles in basalt fibre-reinforced polymer composites for thermal applications. Therm. Anal. Calorim., 1-13(2024). https://doi.org/10.1007/s10973-024-13015-9 [Google Scholar]
  18. N. Thirumalaivasan, S. Nangan, K. Kanagaraj and S. Rajendran, Assessment of sustainability and environmental impacts of renewable energies: Focusing on biogas and biohydrogen (Biofuels) production. Process Saf. Environ. Prot., 2024, https://doi.org/10.1016/j.psep.2024.06.063 [Google Scholar]
  19. R. Ramasubburayan, K. Kanagaraj, L. Gnanasekaran, N. Thirumalaivasan and N. Senthilkumar, Correction: Greener Approach Supported Nitrogen- Infused Carbon Dots for Biocompatible Cellular Markers and Fluorescent Ink Based Spray-Assisted Fingerprint Analysis. Waste Biomass Valoriz.,1- 1(2024). https://doi.org/10.1007/s12649-024-02592-3 [Google Scholar]
  20. N. Thirumalaivasan, L. Gnanasekaran, S. Kumar, R. Durvasulu, T. Sundaram, S. Rajendran, S. Nangan and K. Kanagaraj, Utilization of fungal and bacterial bioremediation techniques for the treatment of toxic waste and biowaste. Front. Mater., 11, 1416445(2024). doi: 10.3389/fmats.2024.1416445 [CrossRef] [Google Scholar]
  21. T. Raja and Y. Devarajan, Study on the Effect of Nanoparticles Extracted from Banyan Aerial Root Reinforced Porcelain Filler Blended PMMA Composite. J. Inst. Eng. (India) Ser. D, 1-6(2024). https://doi.org/10.1007/s40033-024-00772-y [Google Scholar]
  22. S. Arumugam, N. Senthilkumar, N. Thirumalaivasan, G. Dharman, S. Pandiaraj, M. Rahaman, M. Palaniappan, R. Muthusami, T. Manogaran and L. Mari, Heterogenous copper(II) schiff-base complex immobilized mesoporous silica catalyst for multicomponent biginelli reaction J. Organomet. Chem., 998, 122804(2023). https://doi.org/10.1016/j.jorganchem.2023.122804 [CrossRef] [Google Scholar]
  23. T. Raja, Y. Devarajan, K. Logesh, A. Rajiv, V. Jagdish Upadhye and K. Tiwari, An in-depth investigation into the utilization of nettle fiber- reinforced epoxy composites with embedded MgO nanoparticles. J. Reinf. Plast. Compos., 07316844241266650(2024). https://doi.org/10.1177/07316844241266650 [Google Scholar]
  24. S. Rajapandi, S. Nangan, T. Natesan, A. Kumar, G. Dharman, M. Pandeeswaran, D. Verma, M. Ubaidullah, B. Pandit and N. Dhaliwal, Ziziphus mauritiana-derived nitrogen-doped biogenic carbon dots: Eco- friendly catalysts for dye degradation and antibacterial applications. Chemosphere, 338, 139584(2023). https://doi.org/10.1016/j.chemosphere.2023.139584 [CrossRef] [Google Scholar]
  25. T. Raja and Y. Devarajan, Study on the characteristics of novel fiber extracted from Foxtail palm fruits – A steps towards the sustainable development. Mater. Lett., 373, 137145(2024). https://doi.org/10.1016/j.matlet.2024.137145 [CrossRef] [Google Scholar]
  26. S. Nangan, T. Natesan, W. Sukmas, M. Okhawilai, K. J. Babu, P. Tsuppayakorn-Aek, T. Bovornratanaraks, T. Wongsalam, V. Vimal and H. Uyama, Waste plastics derived nickel-palladium alloy filled carbon nanotubes for hydrogen evolution reaction. Chemosphere, 341, 139982(2023). https://doi.org/10.1016/j.chemosphere.2023.139982 [CrossRef] [Google Scholar]
  27. M. Shellaiah, P. Venkatesan, N. Thirumalaivasan, S.-P. Wu and K.-W. Sun, Pyrene-Based Fluorescent Probe for “Off-on-Off” Sequential Detection of Cu2+ and CN− with HeLa Cells Imaging. Chemosensors, 11, 115(2023). https://doi.org/10.3390/chemosensors11020115 [CrossRef] [Google Scholar]
  28. P. Venkatesan, R. Govindasamy, G. Periyasami, M. Rahaman, S. Pandiaraj, M. Thiruvengadam, N. Thirumalaivasan and S.-P. Wu, Eco-friendly, bright luminescent carbon dots and their potential applications for detecting hypochlorous acid in water and live cell imaging. J. Mater. Res. Technol., 24, 6522-6532(2023). https://doi.org/10.1016/j.jmrt.2023.04.181 [CrossRef] [Google Scholar]
  29. M. Shellaiah, K. W. Sun, N. Thirumalaivasan, M. Bhushan and A. Murugan, Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review. Sensors, 24, 2504(2024). https://doi.org/10.3390/s24082504 [CrossRef] [Google Scholar]
  30. N. Thirumalaivasan, P. Venkatesan and S.-P. Wu, Highly selective turn-on probe for H2S with imaging applications in vitro and in vivo. New J. Chem., 41, 13510-13515(2017). https://doi.org/10.1039/C7NJ02869E [CrossRef] [Google Scholar]
  31. V. Mohanavel, S. Kannan, T. Raja, A. Kulandaivel, N. Ganesh and M. E. M. Soudagar, Impact of zinc oxide nanoparticles on the mechanical properties of coir fiber reinforced composites for sustainable development. Interact., 245, 228(2024). https://doi.org/10.1007/s10751-024-02064-z [CrossRef] [Google Scholar]
  32. T. Raja, D. Yuvarajan, S. Ali, G. Dhanraj and N. Kaliappan, Fabrication of glass/madar fibers reinforced hybrid epoxy composite: a comprehensive study on the material stability. Sci Rep., 14, 8374(2024). https://doi.org/10.1038/s41598-024-53178-x [CrossRef] [Google Scholar]
  33. P. David, V. Gopathy, M. Ravichandran, V. Mohanavel, A. Barve, T. Raja, M. E. M. Soudagar, S. Al Obaid and S. H. Salmen, Fabrication and development of high temperature resisted bronze composites using 3D printed gate pattern through stir casting route. Therm. Sci. Eng. Prog., 102710(2024). https://doi.org/10.1016/j.tsep.2024.102710 [Google Scholar]
  34. T. Raja, V. Mohanavel, S. Kannan, S. Parikh, D. Paul, P. Velmurugan, A. Chinnathambi, S. A. Alharbi and S. Sivakumar, The effect of porcelain filler particulates madar fiber reinforced epoxy composite – A comprehensive study for biomedical applications. Heliyon, 10(2024). https://doi.org/10.1016/j.heliyon.2024.e29818 [Google Scholar]
  35. C.-J. Chu, G.-S. Wu, H.-I. Ma, P. Venkatesan, N. Thirumalaivasan and S.-P. Wu, A fluorescent turn-on probe for detection of hypochlorus acid and its bioimaging in living cells. Spectrochim. Acta A Mol. Biomol. Spectrosc., 233, 118234(2020). https://doi.org/10.1016/j.saa.2020.118234 [CrossRef] [Google Scholar]
  36. V. Mohanavel, R. P. Singh, S. Kuppusamy, T. Raja, S. Kathiresan, M. R. Karim and I. A. Alnaser, Effect of incorporation natural fillers with Sterculia foetida fiber on physical, mechanical, and thermal characterization of epoxy polymer composites. Int. J. Adv. Manuf. Technol., 1-11(2024). https://doi.org/10.1007/s00170-023-12907-8 [Google Scholar]
  37. R. Thandavamoorthy, J. K. Alagarasan, V. Mohanavel, P. Velmurugan, F. O. Al-Otibi, I. Hossain, M. E. M. Soudagar and M. Lee, Fabrication of green composite made by Cannabis sativa fiber reinforced granite filler blended epoxy matrix composite – Antimicrobial and structural analysis. J. Mater. Res. Technol., 32, 2474-2481(2024). https://doi.org/10.1016/j.jmrt.2024.08.105 [CrossRef] [Google Scholar]
  38. S. D. Christopher, Y. Devarajan, T. Raja and R. Jayabal, A comprehensive review of biomass pyrolysis for hydrogen production in India. Process Saf Environ Prot, (2024). https://doi.org/10.1016/j.psep.2024.07.034 [Google Scholar]
  39. T. Raja and Y. Devarajan, Effective utilization of fibre extracted from the waste neem tree twigs—a step towards sustainable practices. Biomass Convers. Biorefin., 2023, 1-9. https://doi.org/10.1007/s13399-023-04133-9 [Google Scholar]
  40. L.-F. Wei, C.-Y. Chen, C.-K. Lai, N. Thirumalaivasan and S.-P. Wu, A nano- molar fluorescent turn-on probe for copper (II) detection in living cells. Methods, 168, 18-23(2019). https://doi.org/10.1016/j.ymeth.2019.04.023 [Google Scholar]
  41. R. Thandavamoorthy and Y. Devarajan, Study on the nuclear shield behaviors of basalt/carbon fibers reinforced PbO blended epoxy matrix composite – A novel material for thermal insulation applications. Nucl. Eng. Technol., (2024). https://doi.org/10.1016/j.net.2024.09.003 [Google Scholar]
  42. C. S. Damian, Y. Devarajan, R. Thandavamoorthy and R. Jayabal, Harnessing artificial intelligence for enhanced bioethanol productions: a cutting-edge approach towards sustainable energy solution. Int J Chem React Eng., 22, 719-727(2024). https://doi.org/10.1515/ijcre-2024-0074 [CrossRef] [Google Scholar]
  43. T. Raja, M. Vinayagam, A. Venkataramanan, A. Mohankumar, A. Chinnathambi, S. A. Alharbi and M. Kalam, Effect of nano alumina particles on Boehmeria nivea fiber-reinforced polyester green composite: biological, elemental and mechanical analysis Opt Quant Electron, 56, 538(2024). https://doi.org/10.1007/s11082-023-06188-4. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.