EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 596 (2024) E3S Web Conf., 596 (2024) 01006 References
Open Access
Issue
E3S Web Conf.
Volume 596, 2024
International Conference on Civil, Materials, and Environment for Sustainability (ICCMES 2024)
Article Number 01006
Number of page(s) 8
Section Civil, Materials and Environment for Sustainability ICCMES 2024
DOI https://doi.org/10.1051/e3sconf/202459601006
Published online 22 November 2024
  1. Ghani, A., Khan, F. A., Khan, S. W., Haq, I. U., Li, D., Khan, D., & Qureshi, Q. B. A. I. L. (2024). Experimental study on the mechanical behavior of concrete incorporating fly ash and marble powder waste. Scientific Reports, 14(1), 19147. [CrossRef] [PubMed] [Google Scholar]
  2. Mhamal, A. A., & Savoikar, P. P. (2023). Use of marble and granite dust waste as partial replacement of fine aggregates in concrete. IOP Conference Series: Earth and Environmental Science, 1130(1), 012013. https://doi.org/10.1088/17551315/1130/1/012013 [CrossRef] [Google Scholar]
  3. Gugan, R., Amarnath, R., Farmaan Sathak, M., Ahamedmunaf, M., & Meera Maidheen, M. (2024). Experimental study on lightweight concrete using leca materials. International Journal of Advanced Research, 12(03), 444–449.https://doi.org/10.21474/ijar01/18412 [CrossRef] [Google Scholar]
  4. Youssf, O., Mills, J. E., Elchalakani, M., Alanazi, F., & Yosri, A. M. (2022). Geopolymer concrete with lightweight fine aggregate: Material performance and structural application. Polymers, 15(1), 171. https://doi.org/10.3390/polym15010171 [CrossRef] [PubMed] [Google Scholar]
  5. J. Huang, Q. Jiang, X. Chong, X. Ye, C. Liu. Structural performance of a facade precast concrete sandwich panel enabled by a bar-type Basalt fiber- reinforced polymer connector. Front. Struct. Civ. Eng. 17, 122–137 (2023). https://doi.org/10.1007/s11709-022-0894-1. [CrossRef] [Google Scholar]
  6. D. Tomlinson, A. Fam. Flexural behavior of precast concrete sandwich wall panels with Basalt FRP and steel reinforcement. PCI J. 60, 51–71 (2015). https://doi.org/10.15554/pcij.11012015.51.71. [CrossRef] [Google Scholar]
  7. IS 8112. Ordinary Portland Cement, 43 Grade – Specification (Second Revision). Bureau of Indian Standards Manak Bhavan, 9 Bahadur Shah Zafar Marg New Delhi 110002; 2013. [Google Scholar]
  8. Dhemla, P., Somani, P., & Swami, B. L. (2024). Enhancing sustainability in construction: An evaluation of lightweight concrete with sintered fly ash and waste marble sand. Advances in Civil Engineering Materials, 13(1), 182–198. https://doi.org/10.1520/acem20230070 [CrossRef] [Google Scholar]
  9. Panda, J. N., Nayak, D., Dash, N., Angadi, S., & Rath, S. S. (2023). Insight of reduction roasting of a low-grade Goethitic Indian iron ore in a rotary kiln: Process optimization and characterization. Transactions of the Indian Institute of Metals, 77(2), 553–561. https://doi.org/10.1007/s12666-023-03141-7 [Google Scholar]
  10. Sajedi, F., & Shafigh, P. (2012). High-strength lightweight concrete using Leca, silica fume, and limestone. Arabian Journal for Science and Engineering, 37(7), 1885–1893. https://doi.org/10.1007/s13369-012-0285-3 [CrossRef] [Google Scholar]
  11. Jin, A., Kim, D., Yun, H., Kim, S., & Park, W. (2023). Residual flexural tensile strength of 60 MPA concrete reinforced with 2,000 MPA high-strength hooked- end steel fibers. Journal of the Korea Concrete Institute, 35(1), 79–90. https://doi.org/10.4334/jkci.2023.35.1.079 [CrossRef] [Google Scholar]
  12. Köksal, F., Beycioğlu, A., & Dobiszewska, M. (2022). Optimization based on toughness and splitting tensile strength of steel-fiber-Reinforced concrete incorporating silica fume using response surface method. Materials, 15(18), 6218. https://doi.org/10.3390/ma15186218 [CrossRef] [PubMed] [Google Scholar]
  13. IS 4671. Specification for Expanded Polystyrene for Thermal Insulation Purposes. Indian Standard, (First Edition); 1984. [Google Scholar]
  14. Kumar, P., Kumar, R., Nighot, N. S., Sharma, S., Rahman, M. R., Chidambaram, R. S., & Khan, S. (2024). Improving sustainability of precast concrete sandwich wall panels through stone waste aggregates and supplementary. Applied Engineering and Technology, 3(2), 102–114.https://doi.org/10.31763/aet.v3i2.1399 [CrossRef] [Google Scholar]
  15. R. Ralegaonkar, H. Gavali, P. Aswath, S. Abolmaali. Application of chopped Basalt fibers in reinforced mortar: A review. Constr. Build. Mater. 164, 589–602 (2018). https://doi.org/10.1016/j.conbuildmat.2017.12.245. [CrossRef] [Google Scholar]
  16. Bureau of Indian Standards. (2019). IS 10262:2019: Concrete mix proportioning – Guidelines (2nd ed.). Bureau of Indian Standards. [Google Scholar]
  17. American Society for Testing and Materials. ASTM E72: Standard test methods of conducting strength tests of panels for building construction. ASTM International. https://doi.org/10.1520/E0072-15 [Google Scholar]
  18. Kumar, P., Nighot, N. S., Kumar, R., Sharma, S., Kirgiz, M., & Goyal, A. (2024). Advancements in precast concrete sandwich panels for load-bearing structures. Applied Engineering and Technology, 3(1). https://doi.org/10.31763/aet.v3i1.1402 [Google Scholar]
  19. Sharma, C., Rajput, A., Kumar, R.*, Srinivasaraonaik, B., Paswan, R., & Goyal, A. (2024). Thermo- mechanical and microstructural characterization of LECA and low carbon cement based lightweight mortar using box behnken design, and embodied energy analysis. Construction and Building Materials, 411, 134530. https://doi.org/10.1016/j.conbuildmat.2023.134530. [CrossRef] [Google Scholar]
  20. Shah, M. C., Gupta, K. K., Nainwal, A., Negi, A., & Kumar, V. (2021). Investigation of mechanical properties of concrete with natural aggregates partially replaced by recycled coarse aggregate (RCA). Proceedings, 46, 10315–10321.https://doi.org/10.1016/j.matpr.2020.12.456 [Google Scholar]
  21. Shah, M. C., Gupta, K. K., Nainwal, A., Negi, A., & Kumar, V. (2022). Investigation of mechanical properties of concrete using fly ash as a binder agent. AIP Conference Proceedings, 2767, 020042.https://doi.org/10.1063/5.0105381 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.