Open Access
Issue
E3S Web Conf.
Volume 486, 2024
IX International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-IX 2023)
Article Number 01031
Number of page(s) 15
Section Agritechnologies and Environmental Engineering for Sustainable Environmental Health
DOI https://doi.org/10.1051/e3sconf/202448601031
Published online 07 February 2024
  1. A.N. Filipchuk, N.V. Malysheva, T.A. Zolina, A.N. Yugov, Forestry information 1, 92–114 (2020). https://www.doi.org/10.24419/LHI.2304-3083.2020.1.10 [Google Scholar]
  2. S. Gauthier, P. Bernier, T. Kuuluvainen, A.Z. Shvidenko, D.G. Schepaschenko, Science 349 (6250), 819–822 (2015). https://www.doi.org/10.1126/science.aaa9092 [CrossRef] [PubMed] [Google Scholar]
  3. A.I. Pisarenko, V.V. Strakhov, Boreal forests and forestry (Jurisprudence, Moscow, 2012) [Google Scholar]
  4. A.S. Ilyintsev, I.G. Shamontyev, S.V. Tretyakov, Forestry Engineering Journal 3 (43), 45–62 (2021). https://www.doi.org/10.34220/issn.2222-7962/2020.3/4 [CrossRef] [Google Scholar]
  5. D.Yu. Druchinin, M.A. Popov, On the question of creation of microhills when carrying out forest restoration in conditions of temporarily wet soils, in Proceedings of the XIX International Scientific and Technical Conference “Current problems of development of the forestry complex”, 7 December 2021, Vologda, Russia, pp. 48–53, (2021) [Google Scholar]
  6. A.M. Tarakanov et al., Potential for forest restoration on excessively moist soils of the European North of Russia, in Proceedings of the IV scientific and technical conference “Forests of Russia: politics, industry, science, education”, 22-25 May 2019, St. Petersburg, Russia, pp. 168–172, (2019) [Google Scholar]
  7. M. Löf et al., New For. 43 (5-6), 825–848 (2012) [CrossRef] [Google Scholar]
  8. Uotila, K. et al., Silva Fenn. 44 (3), 511–524 (2010) [CrossRef] [Google Scholar]
  9. V.N. Vinokurov, G.V. Silaev, Forestry machines and their application, (MGUL, Moscow, 1999) [Google Scholar]
  10. I.M. Bartenev, A.F. Petkov, N.S. Kamalova, Forestry journal 1 (41), 172–180 (2021). https://www.doi.org/10.34220/issn.2222-7962/2021.1/16 [Google Scholar]
  11. V.K. Dedkov, Modeling as the basis of scientific and technological progress, in Proceedings of the international symposium “Reliability and Quality” 1, pp. 19–22. (2013) [Google Scholar]
  12. N.P. Kalashnikov, M.A. Smondyrev, Fundamentals of Physics: in 2 vols. (Moscow, Laboratory of Knowledge, 2017) [Google Scholar]
  13. T. Saati, Decision-making. Method of hierarchy analysis (Moscow, Radio and Communications, 1993) [Google Scholar]
  14. P.E. Goncharov, I.M. Bartenev, M.V. Drapalyuk, M.V. Shavkov, Theory and design of technological machines and equipment of forestry; Machines and mechanisms in forestry and forestry (Voronezh, VGLTA, 2014) [Google Scholar]
  15. J. Barr, J. Desbiolles, M. Ucgul, J.M. Fielke, Biosystems Engineering 189, 99–115 (2020). https://doi.org/10.1016/j.biosystemseng.2019.11.008 [CrossRef] [Google Scholar]
  16. Z. Zeng, Y. Chen, Biosystems Engineering 180, 25–35 (2019). https://doi.org/10.1016/j.biosystemseng.2019.01.009 [CrossRef] [Google Scholar]
  17. G. Zhang, Z. Zhang, M. Xiao, P. Bartos, A. Bohata, Computers and Electronics in Agriculture 164, 104902 (2019). https://doi.org/10.1016/j.compag.2019.104902 [CrossRef] [Google Scholar]
  18. V.M. Kolodyazhny, O.Yu. Lisina, Mechanical Engineering Problems 3, 67–74 (2010) [Google Scholar]
  19. G.A. Khailis et al., Mechanical and technological properties of agricultural materials (Lutsk, LGTU, 1998) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.