Investigative Experimental Research: Effects of Waste Rubber as an Additive Substitute for Coarse Aggregates on the Compressive Strength of the Concrete

Open Access

Issue		E3S Web of Conf. Volume 488, 2024 1^st International Conference on Advanced Materials & Sustainable Energy Technologies (AMSET2023)


Article Number		03017
Number of page(s)		13
Section		Green Buildings; Carbon Capture & Recycling of Energy Materials
DOI		https://doi.org/10.1051/e3sconf/202448803017
Published online		06 February 2024

A. Gholampour, T. Ozbakkaloglu, and R. Hassanli, “Behavior of rubberized concrete under active confinement,” Constr. Build. Mater., vol. 138, pp. 372–382, May (2017), doi: 10.1016/j.conbuildmat.2017.01.105. [CrossRef] [Google Scholar]
B. Coxworth, “Scientists create quality concrete with 100% tire-rubber aggregate. New Atlas,” Ben Coxworth. [Online]. Available: https://newatlas.com/materials/concrete-100-percent-tire-rubber-aggregate/ [Google Scholar]
J. A. Padilla, A. N. Victoria, O. G. Dela Cruz, C. T. Despabeladera, and C. J. N. Creencia, “Evaluation of international roughness index by speed-related quality criteria in the philippines,” presented at the Proceedings of the Annual International Conference on Architecture and Civil Engineering, (2019). doi: 10.5176/2301-394X_ACE19.523. [Google Scholar]
J. A. Padilla and O. G. dela Cruz, Methods on Calculating the International Roughness Index: A Literature Review, vol. 243. in Lecture Notes in Civil Engineering, vol. 243. (2022). doi: 10.1007/978-3-030-99979-7_2. [Google Scholar]
K. Bisht and P. V. Ramana, “Evaluation of mechanical and durability properties of crumb rubber concrete,” Constr. Build. Mater., vol. 155, pp. 811–817, Nov. (2017), doi: 10.1016/j.conbuildmat.2017.08.131. [CrossRef] [Google Scholar]
O. G. Dela Cruz, J. A. Padilla, and A. N. Victoria, “Managing Road Traffic Accidents: A Review on Its Contributing Factors,” IOP Conf. Ser. Earth Environ. Sci., vol. 822, no. 1, p. 012015, Jul. (2021), doi: 10.1088/1755-1315/822/1/012015. [CrossRef] [Google Scholar]
M. Gopal, “Concrete Admixtures (Additives)- Types, Selection, Properties, Uses.” [Online]. Available: https://theconstructor.org/concrete/concrete-admixtures-types-and-uses/409/ [Google Scholar]
Y. Yuan, X. Zhu, and L. Chen, “Relationship among cohesion, adhesion, and bond strength: From multi-scale investigation of asphalt-based composites subjected to laboratory-simulated aging,” Mater. Des., vol. 185, p. 108272, Jan. (2020), doi: 10.1016/j.matdes.2019.108272. [CrossRef] [Google Scholar]
D. Motiejunas and R. C. Wade, “Structural, Energetic, and Dynamic Aspects of Ligand–Receptor Interactions,” in Comprehensive Medicinal Chemistry II, Elsevier, (2007), pp. 193–213. doi: 10.1016/B0-08-045044-X/00250-9. [CrossRef] [Google Scholar]
K. Strukar, T. Kalman Šipoš, I. Miličević, and R. Bušić, “Potential use of rubber as aggregate in structural reinforced concrete element – A review,” Eng. Struct., vol. 188, pp. 452–468, Jun. (2019), doi: 10.1016/j.engstruct.2019.03.031. [CrossRef] [Google Scholar]
T. Ishwariya, “An Experimental Study On Partial Replacement Of Coarse Aggregate By crumb Rubber,” vol. 03, no. 06. [Google Scholar]
S. Rameswari A, “Experimental Study on the Mechanical behaviour of Crumb rubber in High Strength Concrete,” vol. 4, no. 3, pp. 2270–2273. [Google Scholar]
N. N. Hilal, “Hardened properties of self-compacting concrete with different crumb rubber size and content,” Int. J. Sustain. Built Environ., vol. 6, no. 1, pp. 191–206, Jun. (2017), doi: 10.1016/j.ijsbe.2017.03.001. [CrossRef] [Google Scholar]
A. Siddika, Md. A. A. Mamun, R. Alyousef, Y. H. M. Amran, F. Aslani, and H. Alabduljabbar, “Properties and utilizations of waste tire rubber in concrete: A review,” Constr. Build. Mater., vol. 224, pp. 711–731, Nov. (2019), doi: 10.1016/j.conbuildmat.2019.07.108. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.