Open Access
| Issue |
E3S Web Conf.
Volume 500, 2024
The 1st International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2023)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 6 | |
| Section | Engineering and Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202450003007 | |
| Published online | 11 March 2024 | |
- Lancelot, H. B., “Mechanical Splices of Reinforcing Bars”, Richmond Screw Anchor Company Inc.,Fort Wort, Texas, 1985 [Google Scholar]
- Ginting, Joi Fiktori. Usulan Clamp Sebagai Sambungan Mekanis Tulangan Baja Tarik. Diss. Institut Teknologi Sepuluh Nopember.Surabaya, 2015 [Google Scholar]
- Budiman H., Analisis pengujian tarik (tensile test) pada baja ST 37 dengan alat bantu ukur load cell. Jurnal J-Ensitec. Vol 3, No.1, pp 9-13, 2016 [Google Scholar]
- Bangun, S., “Pengaruh Penggunaan Metode Sambungan Pembesian Coupler Terhadap Rencana Biaya Pelaksanaan”, Jurnal Sain dan Teknologi Teknik UTAMA. Jurusan Teknik Sipil Universitas Tama Jagakarsa, pp 100 –106, 2019 [Google Scholar]
- Anonim, SNI – 2052 – 2017: Baja Tulangan Beton, Badan Standarisasi Nasional, Jakarta, 2017 [Google Scholar]
- Anonim, SNI – 8389 – 2017: Cara Uji Tarik Logam, Badan Standarisasi Nasional, Jakarta, 2017 [Google Scholar]
- Anonim, SNI – 07-0408 – 1989: Cara Uji Tarik Logam, Badan Standarisasi Nasional, Jakarta, 1989 [Google Scholar]
- Nerilli, F ; Marfia, S ; Sacco E, “Tensile Constituve Law of FRCM Strengthening System: A Micro Mechanical Modelling approach”, AIP Conference Proceeding, Vol.2293, Issue.1, 2020 [Google Scholar]
- Li, Yanlong, , “A review of shear and tensile strengths of the Malan Loess in China”, Engineering Geology, No.236, pp 4 –10, 2018 [CrossRef] [Google Scholar]
- Ferdous, Nasrin and Rahman, Md S and Kabir, Reashad Bin and Ahmed, Arif Eftekhar,” A comparative study on tensile strength of different weave structures”, International Journal of Scientific Research Engineering \& Technology, Vol.3, pp 1307-1313, 2014 [Google Scholar]
- Silva, RV and De Brito, J and Dhir, RK, Tensile strength behaviour of recycled aggregate concrete,Construction and Building Materials, Vol.. 83, pp.1008 –1018, 2015 [Google Scholar]
- Kurt, Halil, Ibrahim and Samur, Ramazan and others, Study on microstructure, tensile test and hardness 304 stainless steel jointed by TIG welding International Journal of Science and Technology, Vol. 2, pp.163 –168, 2013 [Google Scholar]
- Ho, HC and Chung, KF and Liu, X and Xiao, M and Nethercot, DA, “ Modelling tensile tests on high strength S690 steel materials undergoing large deformations”, Engineering Structures, Vol. 192, pp 305 –322, 2019 [CrossRef] [Google Scholar]
- Strnadel B, Hiavac LM, Gembalova L, “ Effect of Steel Structure on The Declination Angle in AWJ Cutting, Int J Mach Tools Manuf”,Vol. 64: 12-19, 2015 [Google Scholar]
- Barcley, Leo and Kowalsky, Mervyn, “Critical Bending Strain of Reinforcing Steel and the Buckled Bar Tension Test”, ACI Materials Journal, Vol.116, No.3, pp 53 –61, 2019 [CrossRef] [Google Scholar]
- S.Yan, B.Young, “ Screwed connections of thin sheet steels at elevated temperatures-part II” transient state tests”, Engineering Structures, vol.35, pp.228 –233, 2012 [CrossRef] [Google Scholar]
- M.Dehestani, S.S.Mousavi, Modified Steel Bar Model Incorporating Bond Slip Effects for Embedded Element Method, Construction and Building Materials, Vol 81, pp 284 –290, 2015 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.