Improving the Packaging Quality of Surgical Suture Products at PT. XYZ with the Application of the Six Sigma Method and Failure Mode Effect Analysis (FMEA)

Open Access

Issue		E3S Web Conf. Volume 500, 2024 The 1^st International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2023)


Article Number		03022
Number of page(s)		22
Section		Engineering and Technology
DOI		https://doi.org/10.1051/e3sconf/202450003022
Published online		11 March 2024

Mittal, P. Gupta, V. Kumar, A. Al Owad, S. Mahlawat, and S. Singh, “The performance improvement analysis using Six Sigma DMAIC methodology: A case study on Indian manufacturing company,” Heliyon, vol. 9, no. 3, p. e14625, 2023, doi: 10.1016/j.heliyon.2023.e14625. [CrossRef] [PubMed] [Google Scholar]
C. Sithole, I. Gibson, and S. Hoekstra, “ScienceDirect Evaluasi penerapan desain six sigma untuk teknologi manufaktur aditif logam,” vol. 100, no. 2021, pp. 798–803, 2023. [Google Scholar]
A. Zhafira and R. Fitriana, “Quality Improvement and Waste Minimization in The Production Process of 450 MM Jacking Pipe Using the Lean Six Sigma Method,” pp. 1069–1082, 2023, doi: 10.46254/ap03.20220211. [Google Scholar]
P. Fithri, “Six Sigma Sebagai Alat Pengendalian Mutu Pada Hasil Produksi Kain Mentah Pt Unitex, Tbk,” J@ti Undip J. Tek. Ind., vol. 14, no. 1, p. 43, 2019, doi: 10.14710/jati.14.1.43-52. [Google Scholar]
A. Z. Al Faritsy and Angga Suluh Wahyunoto, “Analisis Pengendalian Kualitas Produk Meja Menggunakan Metode Six Sigma Pada PT XYZ,” J. Rekayasa Ind., vol. 4, no. 2, pp. 52–62, 2022, doi: 10.37631/jri.v4i2.707. [Google Scholar]
E. Afriliano, S. T. S. L. A, and K. Kiswandono, “Analisis Pengendalian Kualitas untuk Mengurangi Kuantitas Kecacatan Produk (Studi Kasus pada Home Industry Tahu Jaya, Turen, Malang),” J. Mhs. Tek. Ind., vol. 4, no. 2, pp. 188–195, 2021. [Google Scholar]
Nailah, A. Harsono, and G. P. Liansari, “Usulan Perbaikan untuk Mengurangi Jumlah Cacat pada Produk Sandal Eiger S-101 Lightspeed dengan Menggunakan Metode Six Sigma,” J. Online Inst. Teknol. Nas., vol. 2, no. 2, pp. 256–267, 2014. [Google Scholar]
D. Cesaron and Tandianto, “Penerapan Metode Six Sigma Dengan Pendekatan Dmaic Pada Proses Handling Painted Body Bmw X3 (Studi Kasus: Pt. Tjahja Sakti Motor),” J. PASTI, vol. IX, no. 3, pp. 248–256, 2019. [Google Scholar]
I. Mayusda, “Quality Improvement of Tin Ingot Product Using Six Sigma Method at PT Timah Tbk,” Opsi, vol. 16, no. 1, p. 121, 2023, doi: 10.31315/opsi.v16i1.7434. [CrossRef] [Google Scholar]
A. Bakhtiar, B. R. Dzakwan, M. E. Br Sipayung, and C. A. Pradhana, “Penerapan Metode Six Sigma di PT Triangle Motorindo,” Opsi, vol. 13, no. 2, p. 113, 2020, doi: 10.31315/opsi.v13i2.4066. [CrossRef] [Google Scholar]
H. Sirine, E. P. Kurniawati, S. Pengajar, F. Ekonomika, D. Bisnis, and U. Salatiga, “PENGENDALIAN KUALITAS MENGGUNAKAN METODE SIX SIGMA (Studi Kasus pada PT Diras Concept Sukoharjo),” AJIE-Asian J. Innov. Entrep., vol. 02, no. 03, pp. 2477–3824, 2017, [Online]. Available: http://www.dirasfurniture.com [Google Scholar]
W. Kurniawan, “Mengurangi Tingkat Kecacatan Pada Proses Produksi Pipa API 14 Inch di PT Bakrie Pipe Industries,” J. Tek. Ind., no. Tingkat Kecacatan Pada Proses Produksi Pipa, pp. 1–8, 2016. [Google Scholar]
R. Fitriana and N. Anisa, “Perancangan Pebaikan Kualitas Produk Baut dan Sekrup Menggunakan Metode Six Sigma dan Data Mining di PT. A,” J. Tek. Ind., vol. 9, no. 1, pp. 46–53, 2019, doi: 10.25105/jti.v9i1.4786. [Google Scholar]
P. Moengin, R. Fitriana, and B. Ramadhan, “Perancangan Sistem Pendukung Keputusan untuk Pengendalian Kualitas pada Departemen Blow PT.D,” J. Tek. Ind., vol. 7, no. 3, pp. 188–207, 2017. [Google Scholar]
S. Harianto, E. Nursanti, and D. Indra Laksmana, “Aplikasi Metode Six Sigma Untuk Peningkatan Kualitas Dan Penjualan Kerajinan Cor Kuningan Tradisional Majapahit MojokertoYang Ramah Lingkungan,” J. Teknol. Dan Manaj. Ind., vol. 6, no. 1, pp. 21–26, 2020, doi: 10.36040/jtmi.v6i1.2626. [Google Scholar]
F. Ahmad, “Six Sigma Dmaic Sebagai Metode Pengendalian Kualitas Produk Kursi Pada Ukm,” Jisi Um, vol. 6, no. 1, p. 7, 2019, [Online]. Available: https://jurnal.umj.ac.id/index.php/jisi/article/view/4061 [Google Scholar]
W. Kurniawan, “Sistem Manajemen Keamanan Pangan ISO 22000 Untuk Industri Yang Berhubungan Dengan Pangan,” J. Tek. Ind., vol. 1, no. 2, pp. 155–160, 2011, doi: 10.25105/jti.v1i2.7002. [18] M. Arifin and H. H. Supriyanto, “Aplikasi Metode Lean Six Sigma Untuk Usulan Improvisasi Lini Produksi Dengan Mempertimbangkan Faktor Lingkungan,” J. Tek. ITS, vol. 1, no. ISSN: 2301-9271, pp. A477–A481, 2012. [Google Scholar]
T. S. Dewayana, D. Sugiarto, and D. Hetharia, “Model Pemilihan Industri Komponen Otomotif Yang Ramah Lingkungan,” J. Tek. Ind., vol. 3, no. 3, pp. 208–216, 2013, doi: 10.25105/jti.v3i3.1564. [Google Scholar]
T. G. Amran, T. SD, and O. Prasyudi, “Model Evaluasi Kinerja Vendor,” J. Tek. Ind., vol. 4, no. 2, 2014, doi: 10.25105/jti.v4i2.1550. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.