Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 03009
Number of page(s) 9
Section Modelling and Numerical Analysis
DOI https://doi.org/10.1051/e3sconf/202450503009
Published online 25 March 2024
  1. Milovanovic, J., Moreau, G., Siret, D., & Miguet, F. (2017 July) Virtual and augmented reality in architectural design and education. In 17th international conference, CAAD futures 2017. [Google Scholar]
  2. Wang, J., Wang, X., Shou, W., & Xu, B. (2014). Integrating BIM and augmented reality for interactive architectural visualisation. Construction Innovation, 14(4), 453–476. [Google Scholar]
  3. Wang, X., Love, P. E., Kim, M. J., Park, C. S., Sing, C. P., & Hou, L. (2013). A conceptual framework for integrating building information modeling with augmented reality. Automation in construction, 34, 37–44. [CrossRef] [Google Scholar]
  4. Fukuda, T., Nada, H., Adachi, H., Shimizu, S., Takei, C., Sato, Y., … & Motamedi, A. (2017). Integration of a structure from motion into virtual and augmented reality for architectural and urban simulation: demonstrated in real architectural and urban projects. In Computer-Aided Architectural Design. Future Trajectories: 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017, Selected Papers 17 (pp. 60–77). Springer Singapore. [Google Scholar]
  5. Basavapoornima, C., Kesavulu, C. R., Maheswari, T., Pecharapa, W., Depuru, S. R., & Jayasankar, C. K. (2020). Spectral characteristics of Pr3+-doped lead based phosphate glasses for optical display device applications. Journal of Luminescence, 228, 117585. [CrossRef] [Google Scholar]
  6. Saxena, K. K., & Lal, A. (2012). Comparative Molecular Dynamics simulation study of mechanical properties of carbon nanotubes with number of stone-wales and vacancy defects. Procedia Engineering, 38, 2347–2355. [CrossRef] [Google Scholar]
  7. Sorensen, S. S. (2013). The development of augmented reality as a tool in architectural and urban design. NA, 19(4). [Google Scholar]
  8. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017 August) Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [CrossRef] [Google Scholar]
  9. Kumari, C. U., Murthy, A. S. D., Prasanna, B. L., Reddy, M. P. P., & Panigrahy, A. K. (2021). An automated detection of heart arrhythmias using machine learning technique: SVM. Materials Today: Proceedings, 45, 1393–1398. [CrossRef] [Google Scholar]
  10. Saxena, K. K., Srivastava, V., & Sharma, K. (2012). Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube using Non-local Elasticity. Advanced Materials Research, 383, 3840–3844. [Google Scholar]
  11. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022 August) Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  12. Adăscăliței, I., & Bălțoi, I. C. M. (2018). The Influence of Augmented Reality in Construction and Integration into Smart City. Informatica Economica, 22(2). [Google Scholar]
  13. Reddy, K. S. P., Roopa, Y. M., Ln, K. R., & Nandan, N. S. (2020 July) IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE [Google Scholar]
  14. Agrawal, R., Singh, S., Saxena, K. K., & Buddhi, D. (2023). A role of biomaterials in tissue engineering and drug encapsulation. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221150740. [Google Scholar]
  15. Arun, V., Shukla, N. K., Singh, A. K., & Upadhyay, K. K. (2015 September) Design of all optical line selector based on SOA for data communication. In Proceedings of the Sixth International Conference on Computer and Communication Technology 2015 (pp. 281–285). [Google Scholar]
  16. SudhirSastry, Y. B., Krishna, Y., & Budarapu, P. R. (2015). Parametric studies on buckling of thin walled channel beams. Computational Materials Science, 96, 416–424. [Google Scholar]
  17. Ramadugu, S., Ledella, S. R. K., Gaduturi, J. N. J., Pinninti, R. R., Sriram, V., & Saxena, K. K. (2023). Environmental life cycle assessment of an automobile component fabricated by additive and conventional manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–12. [Google Scholar]
  18. Shouman, B., Othman, A. A. E., & Marzouk, M. (2022). Enhancing users involvement in architectural design using mobile augmented reality. Engineering, Construction and Architectural Management, 29(6), 2514–2534. [Google Scholar]
  19. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA- MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  20. Balguri, P. K., Samuel, D. H., & Thumu, U. (2021). A review on mechanical properties of epoxy nanocomposites. Materials Today: Proceedings, 44, 346–355. [Google Scholar]
  21. Ajith, J. B., Manimegalai, R., & Ilayaraja, V. (2020 February) An IoT based smart water quality monitoring system using cloud. In 2020 International conference on emerging trends in information technology and engineering (ic-ETITE) (pp. 1–7). IEEE. [Google Scholar]
  22. Swapna Sri, M. N., Anusha, P., Madhav, V. V., Saxena, K. K., Chaitanya, C. S., Haranath, R., & Singh, B. (2023). Influence of Cu particulates on a356mmc using frequency response function and damping ratio. Advances in Materials and Processing Technologies, 1–9. [CrossRef] [Google Scholar]
  23. Wang, X., Truijens, M., Hou, L., Wang, Y., & Zhou, Y. (2014). Integrating Augmented Reality with Building Information Modeling: Onsite construction process controlling for liquefied natural gas industry. Automation in Construction, 40, 96–105. [CrossRef] [Google Scholar]
  24. Mekni, M., & Lemieux, A. (2014). Augmented reality: Applications, challenges and future trends. Applied computational science, 20, 205–214. [Google Scholar]
  25. Telagam, N., Kandasamy, N., & Nanjundan, M. (2017). Smart sensor network based high quality air pollution monitoring system using labview. International Journal of Online Engineering (iJOE), 13(08), 79–87. [CrossRef] [Google Scholar]
  26. Arora, G. S., & Saxena, K. K. (2023). A review study on the influence of hybridization on mechanical behaviour of hybrid Mg matrix composites through powder metallurgy. Materials Today: Proceedings. [Google Scholar]
  27. Hajirasouli, A., & Banihashemi, S. (2022). Augmented reality in architecture and construction education: state of the field and opportunities. International Journal of Educational Technology in Higher Education, 19(1), 39. [Google Scholar]
  28. Chi, H. L., Kang, S. C., & Wang, X. (2013). Research trends and opportunities of augmented reality applications in architecture, engineering, and construction. Automation in construction, 33, 116–122. [CrossRef] [Google Scholar]
  29. Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205–219). Woodhead Publishing. [Google Scholar]
  30. Thomas, B., Piekarski, W., & Gunther, B. (1999). Using augmented reality to visualise architecture designs in an outdoor environment. International Journal of Design Computing Special Issue on Design Computing on the Net (DCNet), 1(4.2). [Google Scholar]
  31. Korpi, A. G., Țălu, Ş., Bramowicz, M., Arman, A., Kulesza, S., Pszczolkowski, B., … & Gopikishan, S. (2019). Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Materials Research Express, 6(8), 086463. [Google Scholar]
  32. Singh, B., Saxena, K. K., Dagwa, I. M., Singhal, P., & Malik, V. (2023). Optimization Of Machining Characteristics of Titanium-Based Biomaterials: Approach to Optimize Surface Integrity for Implants Applications. Surface Review and Letters, 2340008. [Google Scholar]
  33. Mei, Y., Nie, Q., Wang, F., Lin, Y., & Jiang, H. (2019 July) Application of augmented reality technology in industrial design. In IOP conference series: materials science and engineering (Vol. 573, No. 1, p. 012062). IOP Publishing. [Google Scholar]
  34. Song, Y., Koeck, R., & Luo, S. (2021). Review and analysis of augmented reality (AR) literature for digital fabrication in architecture. Automation in construction, 128, 103762. [CrossRef] [Google Scholar]
  35. Jin, Y., Seo, J., Lee, J. G., Ahn, S., & Han, S. (2020). BIM-based spatial augmented reality (sar) for architectural design collaboration: a proof of concept. Applied Sciences, 10(17), 5915. [CrossRef] [Google Scholar]
  36. Gupta, T. K., Budarapu, P. R., Chappidi, S. R., Yb, S. S., Paggi, M., & Bordas, S. P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  37. Awasthi, A., Saxena, K. K., Dwivedi, R. K., Buddhi, D., & Mohammed, K. A. (2022). Design and analysis of ECAP Processing for Al6061 Alloy: a microstructure and mechanical property study. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–13. [Google Scholar]
  38. Alirezaei, S., Taghaddos, H., Ghorab, K., Tak, A. N., & Alirezaei, S. (2022). BIM-augmented reality integrated approach to risk management. Automation in Construction, 141, 104458. [CrossRef] [Google Scholar]
  39. Ergün, O., Akın, Ş., Dino, İ. G., & Surer, E. (2019 March) Architectural design in virtual reality and mixed reality environments: A comparative analysis. In 2019 IEEE conference on virtual reality and 3D user interfaces (VR) (pp. 914–915). IEEE. [CrossRef] [Google Scholar]
  40. Sidani, A., Dinis, F. M., Duarte, J., Sanhudo, L., Calvetti, D., Baptista, J. S., … & Soeiro, A. (2021). Recent tools and techniques of BIM-Based Augmented Reality: A systematic review. Journal of Building Engineering, 42, 102500. [Google Scholar]
  41. Awasthi, A., Saxena, K. K., & Arun, V. (2021). Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44, 2069–2079. [CrossRef] [Google Scholar]
  42. Wang, X., Gu, N., & Marchant, D. (2008). An empirical case study on designer's perceptions of augmented reality within an architectural firm. Journal of Information Technology in Construction (ITcon), 13(33), 536–552. [Google Scholar]
  43. AlFadalat, M., & Al-Azhari, W. (2022). An integrating contextual approach using architectural procedural modeling and augmented reality in residential buildings: the case of Amman city. Heliyon, 8(8). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.