Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01002
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202450701002
Published online 29 March 2024
  1. Sharanabasava, H., Prasad, C. D., & Ramesh, M. R. (2024). Characterization and Wear Behavior of NiCrMoSiC Microwave Cladding. Journal of Materials Engineering and Performance, 33(2), 763–775. [Google Scholar]
  2. Singh, M., Gupta, V. K., Bansal, A., & Sharma, Y. (2024). High temperature oxidation behaviour of NiCrAlY clad developed on SS-304 through microwave irradiation. Results in Surfaces and Interfaces, 14, 100179. [Google Scholar]
  3. Gupta, S., Arora, R., & Sharma, N. (2024). A Study of Microwave Hybrid Heating Techniques Used in the Processing of Various Materials for Engineering Applications. In Manufacturing Engineering and Materials Science (pp. 38–48). CRC Press. [Google Scholar]
  4. Sharma, S., Dwivedi, S. P., Li, C., Awwad, F. A., Khan, M. I., & Ismail, E. A. (2024). Unveiling of grain structure, porosity, phase distributions, microstructural morphology, surface hardness, and tribo-corrosion characteristics of nickel, and titanium dioxide-based SS-304 steel microwave composite coatings cladding. Journal of Materials Research and Technology, 28, 4299–4316. [Google Scholar]
  5. Gupta, D., & Sharma, A. K. (2014). Microwave cladding: a new approach in surface engineering. Journal of manufacturing processes, 16(2), 176–182. [Google Scholar]
  6. Girish, K. M., Naik, R., Prashantha, S. C., Nagabhushana, H., Nagaswarupa, H. P., Raju, K. A., … & Nagabhushana, B. M. (2015). Zn2TiO4: Eu3+ nanophosphor: self-explosive route and its near UV excited photoluminescence properties for WLEDs. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 138, 857–865. [Google Scholar]
  7. Gupta, D., Bhovi, P. M., Sharma, A. K., & Dutta, S. (2012). Development and characterization of microwave composite cladding. Journal of manufacturing processes, 14(3), 243–249. [Google Scholar]
  8. Dwivedi, S. P. (2023). Development and characterization of grinding sludge-reinforced aluminum-based composite by friction stir process technique. World Journal of Engineering. [Google Scholar]
  9. Damodharan, D., Rajesh Kumar, B., Gopal, K., De Poures, M. V., & Sethuramasamyraja, B. (2019). Utilization of waste plastic oil in diesel engines: A review. Reviews in Environmental Science and Bio/Technology, 18, 681–697. [Google Scholar]
  10. Singh, P., Goyal, D. K., & Bansal, A. (2021). Microwave heating: Fundasmentals and application in surface modification of metallic materials–a review. Materials Today: Proceedings, 43, 564–571. [Google Scholar]
  11. Abhijith, N. V., Phutela, S., Kumar, D., & Kalyansundaram, D. (2024). Transitional and refractory elements-based high entropy alloy developed through mechanical alloying and microwave sintering: Tribological and corrosion responses. Vacuum, 113061. [Google Scholar]
  12. Dwivedi SP, Chaudhary V, Sharma S, Sharma S. Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231200467 [Google Scholar]
  13. Chiu, K. Y., Cheng, F. T., & Man, H. C. (2005). A preliminary study of cladding steel with NiTi by microwave-assisted brazing. Materials Science and Engineering: A, 407(1-2), 273–281. [Google Scholar]
  14. Numan, A., Gill, A. A., Rafique, S., Guduri, M., Zhan, Y., Maddiboyina, B., … & Dang, N. N. (2021). Rationally engineered nanosensors: A novel strategy for the detection of heavy metal ions in the environment. Journal of Hazardous Materials, 409, 124493. [Google Scholar]
  15. Sastry, Y. S., Budarapu, P. R., Krishna, Y., & Devaraj, S. (2014). Studies on ballistic impact of the composite panels. Theoretical and Applied Fracture Mechanics, 72, 2–12. [Google Scholar]
  16. Singh, P., Vasudev, H., & Bansal, A. (2022). Effect of post-heat treatment on the microstructural, mechanical, and bioactivity behavior of the microwave-assisted alumina-reinforced hydroxyapatite cladding. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221116168. [Google Scholar]
  17. Girish, K. M., Prashantha, S. C., Nagabhushana, H., Ravikumar, C. R., Nagaswarupa, H. P., Naik, R., … & Umesh, B. (2018). Multi-functional Zn2TiO4: Sm3+ nanopowders: excellent performance as an electrochemical sensor and an UV photocatalyst. Journal of Science: Advanced Materials and Devices, 3(2), 151–160. [Google Scholar]
  18. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). doi:10.1177/09544089231189663 [Google Scholar]
  19. Hebbale, A. M., & Srinath, M. S. (2016). Microstructural investigation of Ni based cladding developed on austenitic SS-304 through microwave irradiation. Journal of materials research and technology, 5(4), 293–301. [Google Scholar]
  20. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., … & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [Google Scholar]
  21. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  22. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [Google Scholar]
  23. Sharanabasava, H., Prasad, C. D., & Ramesh, M. R. (2023). Effect of Mo-and SiC-Reinforced NiCr Microwave Cladding on Microstructure, Mechanical and Wear Properties. Journal of The Institution of Engineers (India): Series D, 1–13. [Google Scholar]
  24. Dwivedi, S.P., Chaudhary, V. & Sharma, S. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. Inter Metalcast (2023). https://doi.org/10.1007/s40962-023-01117-3. [Google Scholar]
  25. Kumar, K. P., Mohanty, A., Lingappa, M. S., Srinath, M. S., & Panigrahi, S. K. (2020). Enhancement of surface properties of austenitic stainless steel by nickel based alloy cladding developed using microwave energy technique. Materials Chemistry and Physics, 256, 123657. [Google Scholar]
  26. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D., … & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [Google Scholar]
  27. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., & Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304. [Google Scholar]
  28. Babu, A., Arora, H. S., Behera, S. N., Sharma, M., & Grewal, H. S. (2018). Towards highly durable bimodal composite claddings using microwave processing. Surface and Coatings Technology, 349, 655–666. [Google Scholar]
  29. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., & Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263. [Google Scholar]
  30. Shashi Prakash Dwivedi, Indradeep Kumar, Shankar Sehgal, Nakul Gupta & Kuldeep K. Saxena (2023) Development of dissimilar AA2014 and AA2024 based composite with nano-Si3N4 reinforcement by friction stir process technique, Journal of Adhesion Science and Technology, DOI: 10.1080/01694243.2023.2242111 [Google Scholar]
  31. Gupta, D., & Sharma, A. K. (2011). Development and microstructural characterization of microwave cladding on austenitic stainless steel. Surface and Coatings Technology, 205(21-22), 5147–5155. [Google Scholar]
  32. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830. [Google Scholar]
  33. Singh, B., Kumar, I., Saxena, K. K., Mohammed, K. A., Khan, M. I., Moussa, S. B., & Abdullaev, S. S. (2023). A future prospects and current scenario of aluminium metal matrix composites characteristics. Alexandria Engineering Journal, 76, 1–17. [CrossRef] [Google Scholar]
  34. Grover, T., Pandey, A., Kumari, S. T., Awasthi, A., Singh, B., Dixit, P., … & Saxena, K. K. (2020). Role of titanium in bio implants and additive manufacturing: An overview. Materials Today: Proceedings, 26, 3071–3080. [Google Scholar]
  35. Kota, V. R., & Bhukya, M. N. (2019). A novel global MPP tracking scheme based on shading pattern identification using artificial neural networks for photovoltaic power generation during partial shaded condition. IET Renewable Power Generation, 13(10), 1647–1659. [Google Scholar]
  36. Shashi Prakash Dwivedi, Shubham Sharma, Changhe Li, Yanbin Zhang, Abhinav Kumar, Rajesh Singh, Sayed M. Eldin, Mohamed Abbas, Effect of nano-TiO2 particles addition on dissimilar AA2024 and AA2014 based composite developed by friction stir process technique, Journal of Materials Research and Technology, Volume 26, 2023, Pages 1872–1881, https://doi.org/10.1016/j.jmrt.2023.07.234. [Google Scholar]
  37. Suresh, G., Ramesh, M. R., Hebbale, A. M., & Srinath, M. S. (2022). Clad Developments Through Microwave Hybrid Heating Technique: Processing and Properties. In Advances in Microwave Processing for Engineering Materials (pp. 87–108). CRC Press. [Google Scholar]
  38. Dhanalaxmi, B., Naidu, G. A., & Anuradha, K. (2015). Adaptive PSO based association rule mining technique for software defect classification using ANN. Procedia Computer Science, 46, 432–442. [Google Scholar]
  39. Vijayakumar, Y., Nagaraju, P., Yaragani, V., Parne, S. R., Awwad, N. S., & Reddy, M. R. (2020). Nanostructured Al and Fe co-doped ZnO thin films for enhanced ammonia detection. Physica B: Condensed Matter, 581, 411976. [Google Scholar]
  40. Awasthi, A., Saxena, K. K., & Dwivedi, R. K. (2021). An investigation on classification and characterization of bio materials and additive manufacturing techniques for bioimplants. Materials Today: Proceedings, 44, 2061–2068. [Google Scholar]
  41. Reddy, K. S. P., Roopa, Y. M., LN, K. R., & Nandan, N. S. (2020, July). IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE. [Google Scholar]
  42. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017, August). Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [Google Scholar]
  43. Yadav, S., Sharma, P., Yamasani, P., Minaev, S., & Kumar, S. (2014). A prototype micro-thermoelectric power generator for micro-electromechanical systems. Applied Physics Letters, 104(12). [Google Scholar]
  44. Pethampalayam Karuppanan Miniappan, Sivagnanam Marimuthu*, Selvan Dharani Kumar, Gopal Gokilakrishnan, Shubham Sharma*, Changhe Li, Shashi Prakash Dwivedi, and Mohamed Abbas, “Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications” Reviews on Advanced Materials Science 2023; 62: 20230342 [Google Scholar]
  45. Gupta, D., & Sharma, A. K. (2012). Microstructural characterization of cermet cladding developed through microwave irradiation. Journal of materials engineering and performance, 21, 2165–2172. [Google Scholar]
  46. Kumar, B., Saxena, K. K., Dey, S. R., Pancholi, V., & Bhattacharjee, A. (2017). Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600). Journal of Alloys and Compounds, 691, 906–913. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.