Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01032
Number of page(s) 12
DOI https://doi.org/10.1051/e3sconf/202450701032
Published online 29 March 2024
  1. A Nasibi, A., Eskandarzadeh, E., Mirzamohammadi, S., & Hashemi, S. J. Study of Microstructural Properties and Tribological Behavior of Novel Al2024/Cr2o3/Gr Surface Composite Produced with Two Different Hybrid Ratios by Friction Stir Processing (Fsp). Erfan and Mirzamohammadi, Sadegh and Hashemi, Seyed Jalal, Study of Microstructural Properties and Tribological Behavior of Novel Al2024/Cr2o3/Gr Surface Composite Produced with Two Different Hybrid Ratios by Friction Stir Processing (Fsp). [Google Scholar]
  2. Anvari, S. R., Karimzadeh, F., & Enayati, M. H. (2013). A novel route for development of Al–Cr–O surface nano-composite by friction stir processing. Journal of Alloys and Compounds, 562, 48–55. [Google Scholar]
  3. Uday, K. N., & Rajamurugan, G. (2023). Analysis of tensile strength on friction stir welded Al 6061 composite reinforced with B4C and Cr2O3 using RSM and ANN. Engineering Research Express, 5(1), 015018. [Google Scholar]
  4. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., … & Zhang, W. (2020). Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, 145686. [CrossRef] [Google Scholar]
  5. Shashi Prakash Dwivedi, Shubham Sharma, Arun Pratap Srivastava, Vandana Arora Sethi, Kahtan A. Mohammed, Abhinav Kumar, M. Ijaz Khan, Mohamed Abbas, Elsayed M. Tag-Eldin, Homogeneity, metallurgical, mechanical, wear, and corrosion behavior of Ni and B4C coatings deposited on 304 stainless steels developed by microwave cladding technique, Journal of Materials Research and Technology, Volume 27, 2023, Pages 5854–5867. [Google Scholar]
  6. Senthilraj, K., Govindasamy, R., Krishnasamy, P., & Uday, K. N. (2021). Mechanical and microstructural behaviour of friction stir Welded Al6061/Cr 2 O 3 metal matrix composite (No. 2021-28-0224). SAE Technical Paper. [Google Scholar]
  7. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830. [Google Scholar]
  8. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., … & Galal, A. M. (2022). Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35, 102113. [Google Scholar]
  9. Singh, A., Rajamurugan, G., Krishnasamy, P., & Dhanabalan, D. (2019). Surface Modification of Aluminium Alloy 5083 Reinforced with Cr 2 O 3/TiO 2 by Friction Stir Process (No. 2019-28-0179). SAE Technical Paper. [Google Scholar]
  10. Kamlesh Paswan, Shubham Sharma, Shashi Prakash Dwivedi, Maha Khalid Abdulameer, Changhe Li, Yaser Yasin, Mohamed Abbas, Elsayed M. Tag-Eldin, An analysis of microstructural morphology, surface topography, surface integrity, recast layer, and machining performance of graphene nanosheets on Inconel 718 superalloy: Investigating the impact on EDM characteristics, surface characterizations, and optimization, Journal of Materials Research and Technology, Volume 27, 2023, Pages 7138–7158. [Google Scholar]
  11. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V. (2019). A non-enzymatic electrochemical sensor based on ZrO2: Cu (I) nanosphere modified carbon paste electrode for electro-catalytic oxidative detection of glucose in raw Citrus aurantium var. sinensis. Food chemistry, 300, 125178. [Google Scholar]
  12. Uday, K. N., Senthilraj, K., & Rajamurugan, G. (2022). Exfoliation corrosion susceptibility on friction stir welded aluminium 6061/Cr2O3 composite. Engineering Research Express, 4(2), 025029. [Google Scholar]
  13. Verma SK, Dwivedi VK, Dwivedi SP. Effect of spent alumina catalyst and date palm fiber ash addition in the development of aluminum based composite. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2023;0(0). [Google Scholar]
  14. Sridhara, V., Gowrishankar, B. S., Snehalatha, & Satapathy, L. N. (2009). Nanofluids—a new promising fluid for cooling. Transactions of the Indian Ceramic Society, 68(1), 1–17. [Google Scholar]
  15. Islam, A., Dwivedi, S. P., Dwivedi, V. K., & Yadav, R. (2022). Extraction of chromium oxide from cclw to develop the aluminium based composite by fsp as reinforcement alongwith alumina. [Google Scholar]
  16. Awasthi, A., Saxena, K. K., & Dwivedi, R. K. (2021). An investigation on classification and characterization of bio materials and additive manufacturing techniques for bioimplants. Materials Today: Proceedings, 44, 2061–2068. [Google Scholar]
  17. Sun, H., Yi, G., Wan, S., Kong, C., Zhu, S., Bai, L., & Yang, J. (2021). Effect of Cr2O3 addition on mechanical and tribological properties of atmospheric plasma-sprayed NiAl-Bi2O3 composite coatings. Surface and Coatings Technology, 427, 127818. [Google Scholar]
  18. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., & Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263. [Google Scholar]
  19. El-Shennawy, M., & Omar, A. A. (2015). Manufacturing of Nano/Micro Composites Using Friction Stir Processing. International Journal of Mechanical Engineering (IJME) 4.3, Apr-May 2015, 29, 48. [Google Scholar]
  20. Lalita Chopra, Anika Sharma, Jasgurpreet Singh Chohan, Viyat Varun Upadhyay, Rajesh Singh, Shubham Sharma, Shashi Prakash Dwivedi, Abhinav Kumar, Elsayed M. Tag-Eldin, Synthesis and characterizations of super adsorbent hydrogel based on biopolymer, Guar Gum-grafted-Poly (hydroxyethyl methacrylate) (Gg-g-Poly (HEMA)) for the removal of Bismarck brown Y dye from aqueous solution, International Journal of Biological Macromolecules, Volume 256, Part 2, 2024, 128518. [Google Scholar]
  21. Sumit Kanchan, Swastik Pradhan, Rajeev Kumar, Shubham Sharma, Omang Bhandari, Manisha Priyadarshini, Shashi Prakash Dwivedi, Fuad A. Awwad, M. Ijaz Khan, Emad A. A. Ismail, Renu Dhiman, ―Developing a model for waste plastic biofuels in CRDi diesel engines using FTIR, GCMS, and WASPAS synchronisations for engine analysis‖ Energy Exploration & Exploitation, 2023. [Google Scholar]
  22. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., & Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304. [Google Scholar]
  23. Dutta, V., Thakur, L., Singh, B., & Vasudev, H. (2022). A study of erosion–corrosion behaviour of friction stir-processed chromium-reinforced NiAl bronze composite. Materials, 15(15), 5401. [Google Scholar]
  24. Sundaram, R., Nachimuthu, R., Sivanandam, A. K., & Natarajan, J. (2024). Electrochemical and hot corrosion behaviour of steel reinforced with AlSiBeTiV high entropy alloy using friction stir processing. Science and Technology of Advanced Materials, (just-accepted), 2320083. [Google Scholar]
  25. Shubham Sharma, Shashi Prakash Dwivedi, Changhe Li, Fuad A. Awwad, M. Ijaz Khan, Emad A.A. Ismail, Unveiling of grain structure, porosity, phase distributions, microstructural morphology, surface hardness, and tribo-corrosion characteristics of nickel, and titanium dioxide-based SS-304 steel microwave composite coatings cladding, Journal of Materials Research and Technology, 2023. [Google Scholar]
  26. Popoola, A. P. I., Malatji, N., & Fayomi, O. S. I. (2016). Fabrication and investigation of thermal and wear properties of zinc novel coatings reinforced with nano-Al2O3 and Cr2O3 particles. Archives of Metallurgy and Materials, 61. [Google Scholar]
  27. Jayabal, R., Subramani, S., Dillikannan, D., Devarajan, Y., Thangavelu, L., Nedunchezhiyan, M., … & De Poures, M. V. (2022). Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends. Energy, 250, 123709. [Google Scholar]
  28. Gobikannan, S., & Gopalakannan, S. (2016). Surface reinforcement on aluminium matrix by hybrid nanocomposites via FSP: a review. Applied Mechanics and Materials, 852, 110–117. [Google Scholar]
  29. Patil, N. A., Pedapati, S. R., & Mamat, O. B. (2020). A review on aluminium hybrid surface composite fabrication using friction stir processing. Archives of Metallurgy and Materials, 65. [Google Scholar]
  30. Verma, S.K., Dwivedi, V.K. & Dwivedi, S.P. An Experimental Investigation on Mechanical and Tribological Properties of Metal Matrix Composites Fabricated with Waste Aluminum, SAC, and CDPF via Stir Casting. J. Inst. Eng. India Ser. D (2024). [Google Scholar]
  31. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D., … & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [Google Scholar]
  32. Srivastava, M., Balaraju, J. N., Ravishankar, B., & Rajam, K. S. (2010). Improvement in the properties of nickel by nano-Cr2O3 incorporation. Surface and Coatings Technology, 205(1), 66–75. [Google Scholar]
  33. Dwivedi, S. P., Sharma, S., Sunil, B. D. Y., Gupta, N., Saxena, K. K., Eldin, S. M., … & Abdullaev, S. S. (2023). Heat Treatment Behavior of Cr in the Form of Collagen Powder and Al2O3 Reinforced Aluminum-Based Composite Material. Journal of Materials Research and Technology. [Google Scholar]
  34. Radhakrishnan S, Dwivedi SP, Sharma B, Gupta S, Gupta P, Chaudhary V. Deciphering the pathways for deployment of different architecture of chemically treated and untreated fibers in polymeric materials for performance enhancement. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2024;0(0). [Google Scholar]
  35. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [Google Scholar]
  36. Kumar, R., & Bairwa, K. N. (2023). Optimizing Al6061-Based Hybrid Metal Matrix Composites: Unveiling Microstructural Transformations and Enhancing Mechanical Properties Through Ni and Cr Reinforcements. [Google Scholar]
  37. Indira, D. N. V. S. L. S., Ganiya, R. K., Ashok Babu, P., Xavier, A., Kavisankar, L., Hemalatha, S., … & Yeshitla, A. (2022). Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, 2022. [Google Scholar]
  38. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482. [Google Scholar]
  39. Safavi, M. S., & Rasooli, A. (2024). The positive contribution of Cr2O3 reinforcing nanoparticles to enhanced corrosion and tribomechanical performance of Ni–Mo alloy layers electrodeposited from a citrate-sulfate bath. Journal of Materials Research and Technology, 28, 865–878. [Google Scholar]
  40. Yue, H. Y., Guo, E. J., Fei, W. D., Yu, Z. M., & Wang, L. P. (2012). Effects of Cr2O3 coating of whiskers on the tensile properties and thermal stability of aluminum borate whiskers reinforced 2024Al composite. Materials Science and Engineering: A, 533, 33–37. [Google Scholar]
  41. Dwivedi, S.P., Chaudhary, V. & Sharma, S. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. Inter Metalcast (2023). [Google Scholar]
  42. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  43. Ansari, A. J., & Anas, M. (2022). Review and analysis of the effect of variables on aluminium based surface composite fabricated through friction stir processing method. International Journal of Advanced Technology and Engineering Exploration, 9(95), 1552–1570. [Google Scholar]
  44. Rao, G. M., Akhil, M., Das, B., Khan, A. R., Patra, A., & Chaira, D. (2023). Development and Characterization of Nano-Al2O3, Cr2O3, and TiO2 Dispersed Mo Alloys Fabricated by Powder Metallurgy. Journal of Materials Engineering and Performance, 32(4), 1683–1706. [Google Scholar]
  45. Radhakrishnan, S., Krishna, J.S., Dwivedi, S.P. et al. Experimental investigation of mechanical and physical properties of coconut shell and eggshell filler-based bio-fiber reinforced epoxy hybrid composites. Biomass Conv. Bioref. (2023). [Google Scholar]
  46. Bandhu, D., Kumari, S., Prajapati, V., Saxena, K. K., & Abhishek, K. (2021). Experimental investigation and optimization of RMDTM welding parameters for ASTM A387 grade 11 steel. Materials and Manufacturing Processes, 36(13), 1524–1534. [Google Scholar]
  47. Kumar, P. S. R., Mashinini, P. M., & Vignesh, R. V. (2022). Wear behavior of friction stir processed AA7075–aluminosilicate/MWCNT hybrid composite using Multi-objective Optimization. Silicon, 14(18), 12329–12347. [Google Scholar]
  48. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., … & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [Google Scholar]
  49. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. (2018). Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4 [Google Scholar]
  50. Raji, A., Nesakumar, J. I. E. T., Mani, S., Perumal, S., Rajangam, V., Thirunavukkarasu, S., & Lee, Y. R. (2021). Biowaste-originated heteroatom-doped porous carbonaceous material for electrochemical energy storage application. Journal of Industrial and Engineering Chemistry, 98, 308–317. [Google Scholar]
  51. Upadhyay, S., & Saxena, K. K. (2020). Effect of Cu and Mo addition on mechanical properties and microstructure of grey cast iron: An overview. Materials Today: Proceedings, 26, 2462–2470. [Google Scholar]
  52. Delivand, M. H. R., Lashgari, H., Hosseinpour, M., Momeni, A., & Parvizi, S. (2024). Investigation of the effective parameters on Al6061/Al 2 O 3. WC. SiC composite fabricated by friction stir process. [Google Scholar]
  53. Peddakrishna, S., & Khan, T. (2018). Design of UWB monopole antenna with dual notched band characteristics by using π-shaped slot and EBG resonator. AEU-International Journal of Electronics and Communications, 96, 107–112. [Google Scholar]
  54. Bhukya, M. N., Kota, V. R., & Depuru, S. R. (2019). A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion. IEEE access, 7, 43831–43845. [Google Scholar]
  55. Samyal, R., Bagha, A. K., Bedi, R., Bahl, S., Saxena, K. K., & Sehgal, S. (2021). Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures. Materials Research Express, 8(7), 075302. [Google Scholar]
  56. Manjunatha, C., Sreenivasa, T. N., Sanjay, P., & Durga Prasad, C. (2023). Optimization of friction stir welding parameters to enhance weld nugget hardness in AA6061-B4C composite material. Journal of The Institution of Engineers (India): Series D, 1–8. [Google Scholar]
  57. Naresh, M., & Munaswamy, P. (2019). Smart agriculture system using IoT technology. International journal of recent technology and engineering, 7(5), 98–102. [Google Scholar]
  58. Bhojak, V., Jain, J. K., Singhal, T. S., Saxena, K. K., Prakash, C., Agrawal, M. K., & Malik, V. (2023). Friction Stir Processing and Cladding: An Innovative Surface Engineering Technique to Tailor Magnesium-Based Alloys for Biomedical Implants. Surface Review and Letters, 2340007. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.