EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 507 (2024) E3S Web of Conf., 507 (2024) 01034 References
Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01034
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202450701034
Published online 29 March 2024
  1. Zhu, Y., Zhou, M., Geng, Y., Zhang, S., Xin, T., Chen, G., … & Shi, Q. (2024). Microstructural evolution and its influence on mechanical and corrosion behaviors in a high-Al/Zn containing duplex Mg-Li alloy after friction stir processing. Journal of Materials Science & Technology, 184, 245–255. [CrossRef] [Google Scholar]
  2. Lu, K., Ma, L., Fu, T., Cui, Q., & Ji, S. (2024). Changes in effective grain delineation criteria induced by strong texturing of Zn-0.15 Mg alloys after friction stir processing. Materials Letters, 357, 135751. [Google Scholar]
  3. Khajeh, R., Javidani, M., Mofarrehi, M., Chen, X. G., Ahmed, M., Farzaneh, A., &Heidarzadeh, A. (2024). Enhancing microstructure and mechanical properties of laser powder bed fusion-fabricated AlSi10Mg alloy through tailored friction stir processing and post-heat treatment. Materials Science and Engineering: A, 889, 145855. [CrossRef] [Google Scholar]
  4. Lakshmi, L., Reddy, M. P., Santhaiah, C., & Reddy, U. J. (2021). Smart phishing detection in web pages using supervised deep learning classification and optimization technique adam. Wireless Personal Communications, 118(4), 3549–3564. [CrossRef] [Google Scholar]
  5. Shashi Prakash Dwivedi, Shubham Sharma, Effect of CeO2–Ni addition on the behavior of AZ91- A356 based composite fabricated by friction solid state technique, Materials Chemistry and Physics, Volume 311, 2024, 128551. [CrossRef] [Google Scholar]
  6. Jayabal, R., Subramani, S., Dillikannan, D., Devarajan, Y., Thangavelu, L., Nedunchezhiyan, M., … & De Poures, M. V. (2022). Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends. Energy, 250, 123709. [CrossRef] [Google Scholar]
  7. Singla, S., Sagar, P., & Handa, A. (2024). Magnesium-based nanocomposites synthesized using friction stir processing: an experimental study. Materials and Manufacturing Processes, 39(3), 356–373. [CrossRef] [Google Scholar]
  8. Samyal, R., Bagha, A. K., Bedi, R., Bahl, S., Saxena, K. K., & Sehgal, S. (2021). Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures. Materials Research Express, 8(7), 075302. [CrossRef] [Google Scholar]
  9. Nabi, S., Rathee, S., & Srivastava, M. (2024). Friction and wear analysis of Al-5052/NiTi surface composites fabricated via friction stir processing. Tribology International, 191, 109179. [CrossRef] [Google Scholar]
  10. Kumar, S., Dang, R., Manna, A. et al. Effect of chemically treated kenaf fiber on the mechanical, morphological, and microstructural characteristics of PLA-based sustainable bio-composites fabricated via direct injection molding route. Biomass Conv. Bioref. (2023). [Google Scholar]
  11. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., &Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304. [CrossRef] [Google Scholar]
  12. Radhika, N., Krishna, S. A., Basak, A. K., & Adediran, A. A. (2024). Microstructure and tribological behaviour of CoCrCuFeTi high entropy alloy reinforced SS304 through friction stir processing. Scientific Reports, 14(1), 3662. [CrossRef] [PubMed] [Google Scholar]
  13. Spandana, K., & Rao, V. S. (2018). Internet of things (Iot) based smart water quality monitoring system. International Journal of Engineering & Technology, 7(3.6), 259–262. [CrossRef] [Google Scholar]
  14. Ragunath, S., Radhika, N., Krishna, S. A., & Rajeshkumar, L. (2024). A study on microstructural, mechanical properties and optimization of wear behavior of friction stir processed AlCrCoFeNi High Entropy Alloy reinforced SS410 using response surface methodology. Heliyon, 10(2). [Google Scholar]
  15. Huang, L., Paidar, M., Zain, A. M., Refaai, M. R. A., Abdullaev, S., &Šlapáková, M. (2024). Effect of processing environment during friction stir processing of AZ31/(ZrO2+ CuO) p surface composite on the mechanical and tribological performance. Journal of Materials Research and Technology, 28, 1891–1899. [CrossRef] [Google Scholar]
  16. Shashi Prakash Dwivedi, Shubham Sharma, Development and characterization of Cu-Ni- Al2O3 surface composite developed by friction stir process technique, Materials Today Communications, Volume 37, 2023, 107399. [CrossRef] [Google Scholar]
  17. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [CrossRef] [Google Scholar]
  18. Nabi, S., Rathee, S., Wani, M. F., & Srivastava, M. (2024). Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing. Materials Chemistry and Physics, 314, 128819. [CrossRef] [Google Scholar]
  19. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. (2018). Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4(3). [Google Scholar]
  20. Marode, R. V., Awang, M., Lemma, T. A., Pedapati, S. R., Hassan, A., Janga, V. S. R., … & Devarajan, Y. (2024). Friction stir processing of AZ91 hybrid composites with exfoliated multi-layered graphene: A Taguchi-Grey relational analysis. Journal of Alloys and Compounds, 972, 172703. [CrossRef] [Google Scholar]
  21. Radhakrishnan, S., Krishna, J.S., Dwivedi, S.P. et al. Experimental investigation of mechanical and physical properties of coconut shell and eggshell filler-based bio-fiber reinforced epoxy hybrid composites. Biomass Conv. Bioref. (2023). [Google Scholar]
  22. Sridhara, V., Gowrishankar, B. S., Snehalatha, & Satapathy, L. N. (2009). Nanofluids—a new promising fluid for cooling. Transactions of the Indian Ceramic Society, 68(1), 1–17. [CrossRef] [Google Scholar]
  23. Mao, W., Paidar, M., Vignesh, R. V., Kharche, N. A., Mohanavel, V., & Zain, A. M. (2024). Exploring the impact of vibration on the tribological and mechanical performance of friction stir processing of AZ80/(MnO+ ZrO2) p surface composite. Materials Letters, 358, 135794. [CrossRef] [Google Scholar]
  24. Li, B., Sun, X., Chen, H., Yang, Y., Luo, Q., Yang, X., … & Pan, F. (2024). Enhancing Mg-Li alloy hydrogen storage kinetics by adding molecular sieve via friction stir processing. Journal of Materials Science & Technology, 180, 45–54. [CrossRef] [Google Scholar]
  25. Shashi Prakash Dwivedi, Shubham Sharma, Synthesis of high entropy alloy AlCoCrFeNiCuSn reinforced AlSi7Mg0.3 based composite developed by solid state technique, Materials Letters, Volume 355, 2024, 135556. [CrossRef] [Google Scholar]
  26. Kumar, A., & Kumar, V. (2024). Analysis of Heat Input and its Effects on Microstructure Development and Mechanical Properties of Friction Stir-Processed AA7075 Alloy. JOM, 76(1), 473–485. [CrossRef] [Google Scholar]
  27. Shashi Prakash Dwivedi, Shubham Sharma, Arun Pratap Srivastava, Vandana Arora Sethi, Kahtan A. Mohammed, Abhinav Kumar, M. Ijaz Khan, Mohamed Abbas, Elsayed M. Tag-Eldin, Homogeneity, metallurgical, mechanical, wear, and corrosion behavior of Ni and B4C coatings deposited on 304 stainless steels developed by microwave cladding technique, Journal of Materials Research and Technology, Volume 27, 2023, Pages 5854–5867. [CrossRef] [Google Scholar]
  28. Sandeep, K. J., Choudhary, A. K., & Immanuel, R. J. (2024). Microstructural characterization and mechanical performance of AZ91 magnesium alloy processed by friction stir processing using novel tool designs. Journal of Materials Engineering and Performance, 33(1), 120–135. [CrossRef] [Google Scholar]
  29. Kamlesh Paswan, Shubham Sharma, Shashi Prakash Dwivedi, Maha Khalid Abdulameer, Changhe Li, Yaser Yasin, Mohamed Abbas, Elsayed M. Tag-Eldin, An analysis of microstructural morphology, surface topography, surface integrity, recast layer, and machining performance of graphene nanosheets on Inconel 718 superalloy: Investigating the impact on EDM characteristics, surface characterizations, and optimization, Journal of Materials Research and Technology, Volume 27, 2023, Pages 7138–7158. [CrossRef] [Google Scholar]
  30. Hoda, M. N., Pal, S. K., & Paul, J. (2024). A novel counter-rotating twin-tool friction stir processing technology for fabrication of Al/SiC surface composite with improved particle distribution. CIRP Journal of Manufacturing Science and Technology, 49, 1–13. [CrossRef] [Google Scholar]
  31. Peddakrishna, S., & Khan, T. (2018). Design of UWB monopole antenna with dual notched band characteristics by using π-shaped slot and EBG resonator. AEU-International Journal of Electronics and Communications, 96, 107–112. [Google Scholar]
  32. Dai, G., Yan, Q., Niu, F., Yao, J., Guo, Y., Sun, Z., & Wu, S. (2024). Refined microstructure and enhanced mechanical performance of hybrid additive manufacturing Al-Cu-Mg alloys by multi-cycle friction stirring processing. Journal of Manufacturing Processes, 112, 248–262. [CrossRef] [Google Scholar]
  33. Rajput, S. K., Kumar, J., Mehta, Y., Soota, T., & Saxena, K. K. (2020). Microstructural evolution and mechanical properties of 316L stainless steel using multiaxial forging. Advances in Materials and Processing Technologies, 6(3), 509–518. [CrossRef] [Google Scholar]
  34. Naresh, M., &Munaswamy, P. (2019). Smart agriculture system using IoT technology. International journal of recent technology and engineering, 7(5), 98–102. [Google Scholar]
  35. Wu, X., Jiang, H., Li, W., Liu, C., Huang, H., Liu, S., & Wei, L. (2024). Preparation of NiTip/Al composites with controllable phase transformation and damping behavior by friction stir processing. Science China Technological Sciences, 1–11. [Google Scholar]
  36. Verma SK, Dwivedi VK, Dwivedi SP. Effect of spent alumina catalyst and date palm fiber ash addition in the development of aluminum based composite. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2023;0(0). [Google Scholar]
  37. Bhukya, M. N., Kota, V. R., & Depuru, S. R. (2019). A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion. IEEE access, 7, 43831–43845. [CrossRef] [Google Scholar]
  38. Keerthana, B. V., Satyanarayana, M. V., Reddy, K. V., & Shankar, M. N. (2024). Microstructure, mechanical characteristics, and electrochemical behavior of the wide-area stir zone fabricated in Al5083 by friction stir processing with overlapping technique. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(2), 505–514. [CrossRef] [Google Scholar]
  39. Lalita Chopra, Anika Sharma, Jasgurpreet Singh Chohan, Viyat Varun Upadhyay, Rajesh Singh, Shubham Sharma, Shashi Prakash Dwivedi, Abhinav Kumar, Elsayed M. Tag-Eldin, Synthesis and characterizations of super adsorbent hydrogel based on biopolymer, Guar Gum-grafted-Poly (hydroxyethyl methacrylate) (Gg-g-Poly (HEMA)) for the removal of Bismarck brown Y dye from aqueous solution, International Journal of Biological Macromolecules, Volume 256, Part 2, 2024, 128518. [CrossRef] [PubMed] [Google Scholar]
  40. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., &Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263. [CrossRef] [Google Scholar]
  41. Vakili-Azghandi, M., Hatami, M. F., & Szpunar, J. A. (2024). Mechanical properties and corrosion behavior of titanium surface biocomposites reinforced with Al2O3 particles fabricated by friction stir processing. Materials Chemistry and Physics, 313, 128749. [CrossRef] [Google Scholar]
  42. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830. [CrossRef] [Google Scholar]
  43. Lingampalli, B., &Dondapati, S. (2024). Solid-state surface alloying of ZK60 Mg alloy with tin using friction stir processing. Materials Technology, 39(1), 2318886. [CrossRef] [Google Scholar]
  44. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482. [CrossRef] [Google Scholar]
  45. Arwin, R., Abraham, S., Rajendran, P., & Prakash Shanmugasundaram, R. (2024). Reinforcement of SiC Particles on Friction Stir Processing of Aluminium AA7050. Engineering Proceedings, 61(1), 45. [Google Scholar]
  46. Indira, D. N. V. S. L. S., Ganiya, R. K., Ashok Babu, P., Xavier, A., Kavisankar, L., Hemalatha, S., … &Yeshitla, A. (2022). Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, 2022. [Google Scholar]
  47. Huang, Y., Xie, Y., & Meng, X. (2024). Friction Stir Processed Bulk Materials. In Friction Stir Welding and Processing (pp. 277–335). Singapore: Springer Nature Singapore. [CrossRef] [Google Scholar]
  48. Sumit Kanchan, Swastik Pradhan, Rajeev Kumar, Shubham Sharma, Omang Bhandari, Manisha Priyadarshini, Shashi Prakash Dwivedi, Fuad A. Awwad, M. Ijaz Khan, Emad A. A. Ismail, Renu Dhiman, ―Developing a model for waste plastic biofuels in CRDi diesel engines using FTIR, GCMS, and WASPAS synchronisations for engine analysis‖ Energy Exploration & Exploitation, 2023 [Google Scholar]
  49. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D., … & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [CrossRef] [Google Scholar]
  50. Msomi, V., &Mabuwa, S. (2024). Analyzing the Influence of Microstructure on the Mechanical Properties of TIG Welded Joints processed by Friction Stir considering the sampling Orientation. Engineering, Technology & Applied Science Research, 14(1), 12470–12475. [CrossRef] [Google Scholar]
  51. Beniwal, G., & Saxena, K. K. (2021). A review on pore and porosity in tissue engineering. Materials Today: Proceedings, 44, 2623–2628. [CrossRef] [Google Scholar]
  52. Chanakyan, C., & Alagarsamy, S. V. (2024). Enhancing Mechanical Properties And Microstructure On Modified Surface Alâ€―Mg/Cr3c2 By Friction Stir Processing. Surface Review and Letters (SRL), 31(02), 1–14. [Google Scholar]
  53. Shubham Sharma, Shashi Prakash Dwivedi, Changhe Li, Fuad A. Awwad, M. Ijaz Khan, Emad A.A. Ismail, Unveiling of grain structure, porosity, phase distributions, microstructural morphology, surface hardness, and tribo-corrosion characteristics of nickel, and titanium dioxide-based SS-304 steel microwave composite coatings cladding, Journal of Materials Research and Technology, 2023. [Google Scholar]
  54. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., … & Zhang, W. (2020). Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, 145686. [CrossRef] [Google Scholar]
  55. Bozorgmehr, M., Heidari, A., Amini, K., Loh Mousavi, M., & Gharavi, F. (2024). The effect of traverse speed in friction stir process on the microstructure, mechanical properties and wear behavior Al5052/ZrO2/ZrSiO4 surface hybrid composite. Journal of Welding Science and Technology of Iran, 9(2), 1–14. [Google Scholar]
  56. Kumari, S., Sonia, P., Singh, B., Abhishek, K., & Saxena, K. K. (2020). Optimization of surface roughness in EDM of pure magnesium (Mg) using TLBO. Materials Today: Proceedings, 26, 2458–2461. [CrossRef] [Google Scholar]
  57. Verma, S.K., Dwivedi, V.K. & Dwivedi, S.P. An Experimental Investigation on Mechanical and Tribological Properties of Metal Matrix Composites Fabricated with Waste Aluminum, SAC, and CDPF via Stir Casting. J. Inst. Eng. India Ser. D (2024). [Google Scholar]
  58. Bandhu, D., Kumari, S., Prajapati, V., Saxena, K. K., & Abhishek, K. (2021). Experimental investigation and optimization of RMDTM welding parameters for ASTM A387 grade 11 steel. Materials and Manufacturing Processes, 36(13), 1524–1534. [CrossRef] [Google Scholar]
  59. Jiang, T., Zhang, M., Dai, G., Shen, Z., Guo, Y., Sun, Z., & Li, W. (2024). Microstructure evolution and mechanical properties of ultrafine-grained AlLi alloy fabricated via friction stir additive manufacturing. Materials Characterization, 113760. [Google Scholar]
  60. Radhakrishnan S, Dwivedi SP, Sharma B, Gupta S, Gupta P, Chaudhary V. Deciphering the pathways for deployment of different architecture of chemically treated and untreated fibers in polymeric materials for performance enhancement. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2024;0(0). [Google Scholar]
  61. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V. (2019). A non-enzymatic electrochemical sensor based on ZrO2: Cu (I) nanosphere modified carbon paste electrode for electro-catalytic oxidative detection of glucose in raw Citrus aurantium var. sinensis. Food chemistry, 300, 125178. [CrossRef] [Google Scholar]
  62. Delivand, M. H. R., Lashgari, H., Hosseinpour, M., Momeni, A., & Parvizi, S. (2024). Investigation of the effective parameters on Al6061/Al 2 O 3. WC. SiC composite fabricated by friction stir process. [Google Scholar]
  63. Upadhyay, S., & Saxena, K. K. (2020). Effect of Cu and Mo addition on mechanical properties and microstructure of grey cast iron: An overview. Materials Today: Proceedings, 26, 2462–2470. [CrossRef] [Google Scholar]
  64. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., … & Galal, A. M. (2022). Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35, 102113. [Google Scholar]
  65. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., … & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [CrossRef] [Google Scholar]
  66. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  67. Jin, Y., Wang, T., Liu, T., Yang, T., Dowden, S., Neogi, A., &Dahotre, N. B. (2024). Gradient process parameter optimization in additive friction stir deposition of aluminum alloys. International Journal of Machine Tools and Manufacture, 195, 104113. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.