Open Access
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01036
Number of page(s) 12
Published online 29 March 2024
  1. Glastan, P. L., Manikandan, S., Krishnakumar, V., & Rajesh, P. V. Study of Joining Dissimilar Aluminium Matrix Composites Using Friction Stir Welding-A Review. [Google Scholar]
  2. Venugopal, V., Singh, V. P., & Kuriachen, B. (2023). Underwater friction stir welding of marine grade aluminium alloys: A review. Materials Today: Proceedings. [Google Scholar]
  3. Sarvaiya, J., & Singh, D. (2019). A Review of Tool Geometry and its Material Used in Friction Stir Processing. 61st 5th, 689. [Google Scholar]
  4. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., … & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [Google Scholar]
  5. Shashi Prakash Dwivedi, Shubham Sharma, Effect of CeO2–Ni addition on the behavior of AZ91- A356 based composite fabricated by friction solid state technique, Materials Chemistry and Physics, Volume 311, 2024, 128551. [Google Scholar]
  6. Mishra, R. S., & Rani, P. (2017). Friction stir welding/processing studies of aluminum alloy & titanium 64. International Journal of Research in Engineering and Innovation, 1(3), 209–217. [Google Scholar]
  7. Lakshmi, L., Reddy, M. P., Santhaiah, C., & Reddy, U. J. (2021). Smart phishing detection in web pages using supervised deep learning classification and optimization technique adam. Wireless Personal Communications, 118(4), 3549–3564. [Google Scholar]
  8. Zhang, H., Pan, Y., Zhang, Y., Lian, G., Cao, Q., & Que, L. (2022). Microstructure, toughness, and tribological properties of laser cladded Mo2FeB2-based composite coating with in situ synthesized WC and La2O3 addition. Surface and Coatings Technology, 449, 128947. [Google Scholar]
  9. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  10. Li, X., Le, Q., Hu, C., Wang, T., Hu, W., Bao, L., … & Zhou, X. (2022). Hot tensile deformation behaviour and microstructure evolution of Al3La phase reinforced Mg-5Li-3Al-2Zn alloy formed in-situ by La2O3 particle. Materials Characterization, 185, 111772. [Google Scholar]
  11. Kumar, S., Dang, R., Manna, A. et al. Effect of chemically treated kenaf fiber on the mechanical, morphological, and microstructural characteristics of PLA-based sustainable bio-composites fabricated via direct injection molding route. Biomass Conv. Bioref. (2023). [Google Scholar]
  12. Chaudhari, A. N., Dixit, K., Bhatia, G. S., Singh, B., Singhal, P., & Saxena, K. K. (2019). Welding behaviour of duplex stainless Steel AISI 2205: AReview. Materials Today: Proceedings, 18, 2731–2737. [Google Scholar]
  13. Shashi Prakash Dwivedi, Shubham Sharma, Development and characterization of Cu-Ni- Al2O3 surface composite developed by friction stir process technique, Materials Today Communications, Volume 37, 2023, 107399. [Google Scholar]
  14. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. (2018). Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4(3). [Google Scholar]
  15. Fan, Y., Chen, F., Cao, S., Hu, Y., & Xie, R. (2024). Effect of coating submicron-sized La2O3 particles on regulating grain structure and mechanical properties of 6061 aluminum alloy CMT welded joints. Materials Today Communications, 38, 107764. [Google Scholar]
  16. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [Google Scholar]
  17. Dwivedi, S. P., Sharma, S., Sharma, K. P., Kumar, A., Agrawal, A., Singh, R., & Eldin, S. M. (2023). The Microstructure and Properties of Ni-Si-La2O3 Coatings Deposited on 304 Stainless Steel by Microwave Cladding. Materials, 16(6), 2209. [Google Scholar]
  18. Radhakrishnan, S., Krishna, J.S., Dwivedi, S.P. et al. Experimental investigation of mechanical and physical properties of coconut shell and eggshell filler-based bio-fiber reinforced epoxy hybrid composites. Biomass Conv. Bioref. (2023). [Google Scholar]
  19. Shashi Prakash Dwivedi, Shubham Sharma, Synthesis of high entropy alloy AlCoCrFeNiCuSn reinforced AlSi7Mg0.3 based composite developed by solid state technique, Materials Letters, Volume 355, 2024, 135556. [Google Scholar]
  20. Sridhara, V., Gowrishankar, B. S., Snehalatha, & Satapathy, L. N. (2009). Nanofluids—a new promising fluid for cooling. Transactions of the Indian Ceramic Society, 68(1), 1–17. [Google Scholar]
  21. Upadhyay, S., & Saxena, K. K. (2020). Effect of Cu and Mo addition on mechanical properties and microstructure of grey cast iron: An overview. Materials Today: Proceedings, 26, 2462–2470. [Google Scholar]
  22. Ashish, B. I. S. T., Saini, J. S., & Sharma, B. (2016). A review of tool wear prediction during friction stir welding of aluminium matrix composite. Transactions of Nonferrous Metals Society of China, 26(8), 2003–2018. [Google Scholar]
  23. Shashi Prakash Dwivedi, Shubham Sharma, Arun Pratap Srivastava, Vandana Arora Sethi, Kahtan A. Mohammed, Abhinav Kumar, M. Ijaz Khan, Mohamed Abbas, Elsayed M. Tag-Eldin, Homogeneity, metallurgical, mechanical, wear, and corrosion behavior of Ni and B4C coatings deposited on 304 stainless steels developed by microwave cladding technique, Journal of Materials Research and Technology, Volume 27, 2023, Pages 5854–5867. [Google Scholar]
  24. Deore, H. A., Nichul, U., Rao, A. G., & Hiwarkar, V. D. (2022). Influence of SiC particles and post-heat treatment on the properties of Ti-6Al-4V-based surface nanocomposite fabricated by friction stir processing. Surface and Coatings Technology, 449, 128985. [Google Scholar]
  25. Kamlesh Paswan, Shubham Sharma, Shashi Prakash Dwivedi, Maha Khalid Abdulameer, Changhe Li, Yaser Yasin, Mohamed Abbas, Elsayed M. Tag-Eldin, An analysis of microstructural morphology, surface topography, surface integrity, recast layer, and machining performance of graphene nanosheets on Inconel 718 superalloy: Investigating the impact on EDM characteristics, surface characterizations, and optimization, Journal of Materials Research and Technology, Volume 27, 2023, Pages 7138–7158. [Google Scholar]
  26. Dinaharan, I., Saravanakumar, S., Kalaiselvan, K., & Gopalakrishnan, S. (2017). Microstructure and sliding wear characterization of Cu/TiB2 copper matrix composites fabricated via friction stir processing. Journal of Asian Ceramic Societies, 5(3), 295–303. [Google Scholar]
  27. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., … & Galal, A. M. (2022). Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35, 102113. [Google Scholar]
  28. Rivero-Antúnez, P., Morales-Flórez, V., Cumbrera, F. L., & Esquivias, L. (2022). Rietveld analysis and mechanical properties of in situ formed La-β-Al2O3/Al2O3 composites prepared by sol-gel method. Ceramics International, 48(17), 24462–24470. [Google Scholar]
  29. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., & Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304. [Google Scholar]
  30. Samyal, R., Bagha, A. K., Bedi, R., Bahl, S., Saxena, K. K., & Sehgal, S. (2021). Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures. Materials Research Express, 8(7), 075302. [Google Scholar]
  31. Rathee, S., Maheshwari, S., Siddiquee, A. N., & Srivastava, M. (2018). A review of recent progress in solid state fabrication of composites and functionally graded systems via friction stir processing. Critical Reviews in Solid State and Materials Sciences, 43(4), 334–366. [Google Scholar]
  32. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D., … & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [Google Scholar]
  33. Kumar, V., Angra, S., & Singh, S. (2023). Influence of rare earth elements on aluminium metal matrix composites: a review. Mater. Phys. Mech, 51(2), 1–20. [Google Scholar]
  34. Verma SK, Dwivedi VK, Dwivedi SP. Effect of spent alumina catalyst and date palm fiber ash addition in the development of aluminum based composite. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2023;0(0). [Google Scholar]
  35. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830. [Google Scholar]
  36. Sahai, N., Saxena, K. K., & Gogoi, M. (2020). Modelling and simulation for fabrication of 3D printed polymeric porous tissue scaffolds. Advances in Materials and Processing Technologies, 6(3), 530–539. [Google Scholar]
  37. Wang, Q., Yang, J., Niu, W., Li, Y., Mao, X., Wang, Y., & Zhang, K. (2021). Effect of La2O3 on microstructure and properties of Fe-based alloy coatings by laser cladding. Optik, 245, 167653. [Google Scholar]
  38. Sharma, V. K., Aggarwal, D., Vinod, K., & Joshi, R. S. (2021). Influence of rare earth particulate on the mechanical & tribological properties of Al-6063/SiC hybrid composites. Particulate Science and Technology, 39(8), 928–943. [Google Scholar]
  39. Lalita Chopra, Anika Sharma, Jasgurpreet Singh Chohan, Viyat Varun Upadhyay, Rajesh Singh, Shubham Sharma, Shashi Prakash Dwivedi, Abhinav Kumar, Elsayed M. Tag-Eldin, Synthesis and characterizations of super adsorbent hydrogel based on biopolymer, Guar Gum-grafted-Poly (hydroxyethyl methacrylate) (Gg-g-Poly (HEMA)) for the removal of Bismarck brown Y dye from aqueous solution, International Journal of Biological Macromolecules, Volume 256, Part 2, 2024, 128518. [Google Scholar]
  40. Jayabal, R., Subramani, S., Dillikannan, D., Devarajan, Y., Thangavelu, L., Nedunchezhiyan, M., … & De Poures, M. V. (2022). Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends. Energy, 250, 123709. [Google Scholar]
  41. Zhang, D., Li, Z., Gao, F., Wei, X., & Ni, Y. (2019). Tribological performance of polymer composite coatings modified with La2O3 and MoS2 nanoparticles. Journal of Tribology, 141(11), 111601. [Google Scholar]
  42. Sumit Kanchan, Swastik Pradhan, Rajeev Kumar, Shubham Sharma, Omang Bhandari, Manisha Priyadarshini, Shashi Prakash Dwivedi, Fuad A. Awwad, M. Ijaz Khan, Emad A. A. Ismail, Renu Dhiman, ―Developing a model for waste plastic biofuels in CRDi diesel engines using FTIR, GCMS, and WASPAS synchronisations for engine analysis‖ Energy Exploration & Exploitation, 2023. [Google Scholar]
  43. Cheng, X., He, Y., Song, R., Li, H., Liu, B., Zhou, H., & Yan, L. (2022). Study of mechanical character and corrosion properties of La2O3 nanoparticle reinforced Ni-W composite coatings. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 652, 129799. [Google Scholar]
  44. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., & Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263. [Google Scholar]
  45. Peddakrishna, S., & Khan, T. (2018). Design of UWB monopole antenna with dual notched band characteristics by using π-shaped slot and EBG resonator. AEU-International Journal of Electronics and Communications, 96, 107–112. [Google Scholar]
  46. Bhukya, M. N., Kota, V. R., & Depuru, S. R. (2019). A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion. IEEE access, 7, 43831–43845. [Google Scholar]
  47. Bandhu, D., Kumari, S., Prajapati, V., Saxena, K. K., & Abhishek, K. (2021). Experimental investigation and optimization of RMDTM welding parameters for ASTM A387 grade 11 steel. Materials and Manufacturing Processes, 36(13), 1524–1534. [Google Scholar]
  48. Zheng, B., He, T., Yue, C., Lin, X., Yuan, X., Dong, F., … & Su, Y. (2023). Realization of synergistic enhancement for strength, wear resistance and ductility via adding La2O3 particles in (TiB+ TiC)/Ti6Al4V composite. Wear, 526, 204945. [Google Scholar]
  49. Naresh, M., & Munaswamy, P. (2019). Smart agriculture system using IoT technology. International journal of recent technology and engineering, 7(5), 98–102. [Google Scholar]
  50. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., … & Zhang, W. (2020). Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, 145686. [CrossRef] [Google Scholar]
  51. Fahad, M. (2021). Tribological and ageing behavior of Az91D magnesium alloy fortified with nano lanthanum and nanoceria by stir casting for aviation application. Industrial Lubrication and Tribology, 73(4), 635–641. [Google Scholar]
  52. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482. [Google Scholar]
  53. Indira, D. N. V. S. L. S., Ganiya, R. K., Ashok Babu, P., Xavier, A., Kavisankar, L., Hemalatha, S., … & Yeshitla, A. (2022). Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, 2022. [Google Scholar]
  54. Beniwal, G., & Saxena, K. K. (2021). A review on pore and porosity in tissue engineering. Materials Today: Proceedings, 44, 2623–2628. [Google Scholar]
  55. Zheng, R., & Li, N. (2019). Mechanical properties and electrical conductivity of nano-La2O3 reinforced copper matrix composites fabricated by spark plasma sintering. Materials Research Express, 6(10), 106527. [Google Scholar]
  56. Arun, M., Muthukumaran, M., & Balasubramanian, S. (2021). Tribological characterization of friction stir welded dissimilar aluminum alloy AA6061–AA5083 reinforced with CeO2 and La2O3 nanoparticles. Industrial Lubrication and Tribology, 73(5), 783–788. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.