Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01040
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202450701040
Published online 29 March 2024
  1. Hashim, J., Looney, L., & Hashmi, M. S. J. (1999). Metal matrix composites: production by the stir casting method. Journal of materials processing technology, 92, 1–7. [Google Scholar]
  2. Kalyani, G., Janakiramaiah, B., Karuna, A., & Prasad, L. N. (2023). Diabetic retinopathy detection and classification using capsule networks. Complex & Intelligent Systems, 9(3), 2651–2664. [Google Scholar]
  3. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V. (2019). A non-enzymatic electrochemical sensor based on ZrO2: Cu (I) nanosphere modified carbon paste electrode for electro-catalytic oxidative detection of glucose in raw Citrus aurantium var. sinensis. Food chemistry, 300, 125178. [Google Scholar]
  4. Rajesh, D., Anand, P., Lenin, N., Raja, V. B., Palanikumar, K., & Balaji, V. (2021). Investigations on the mechanical properties of tungsten carbide reinforced aluminium metal matrix composites by stir casting. Materials Today: Proceedings, 46, 3618–3620. [Google Scholar]
  5. Dwivedi, S.P. (2023), “Development and characterization of grinding sludge-reinforced aluminum-based composite by friction stir process technique”, World Journal of Engineering, Vol. ahead-of-print No. ahead-of-print. [Google Scholar]
  6. Spandana, K., & Rao, V. S. (2018). Internet of things (Iot) based smart water quality monitoring system. International Journal of Engineering & Technology, 7(3.6), 259–262. [Google Scholar]
  7. Suganthi, S. T., Vinayagam, A., Veerasamy, V., Deepa, A., Abouhawwash, M., & Thirumeni, M. (2021). Detection and classification of multiple power quality disturbances in Microgrid network using probabilistic based intelligent classifier. Sustainable Energy Technologies and Assessments, 47, 101470. [Google Scholar]
  8. Pal, A., Poria, S., Sutradhar, G., & Sahoo, P. (2018). Tribological behavior of Al-WC nano-composites fabricated by ultrasonic cavitation assisted stir-cast method. Materials Research Express, 5(3), 036521. [Google Scholar]
  9. Abhijith, R., & Harish, T. M. (2016). Fabrication & analysis of aluminum 2024 & tungsten carbide (WC) metal matric composite by in-situ method. International Journal of Engineering and Technical Research, 5, 400–407. [Google Scholar]
  10. Radhakrishnan, S., Khan, A., Dwivedi, S.P. et al. Studies on mechanical, thermal, and water immersion of plant and animal wastage nanofiller–based bio-fiber-reinforced composites. Biomass Conv. Bioref. (2023). [Google Scholar]
  11. Jayabal, R., Subramani, S., Dillikannan, D., Devarajan, Y., Thangavelu, L., Nedunchezhiyan, M., … & De Poures, M. V. (2022). Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends. Energy, 250, 123709. [Google Scholar]
  12. Praveenkumar, R., Periyasamy, P., Mohanavel, V., & Ravikumar, M. M. (2019). Mechanical and Tribological Behavior of Mg-Matrix Composites Manufactured by Stir Casting. International Journal of Vehicle Structures & Systems (IJVSS), 11(1). [Google Scholar]
  13. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., … & Zhang, W. (2020). Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, 145686. [CrossRef] [Google Scholar]
  14. Suresh, N., Balamurugan, L., & Jayabalakrishnan, D. (2023). Investigations of the wear and corrosion characteristics of Al-SiC-WC hybrid composites produced via stir casting. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231198603. [Google Scholar]
  15. Shashi Prakash Dwivedi, S Selvaprakash, Shubham Sharma, Soni Kumari, Kuldeep K Saxena, Rajesh Goyal, Amjad Iqbal & Faramarz Djavanroodi (2023): Evaluation of various properties for spent alumina catalyst and Si3N4 reinforced with PET-based polymer composite, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2023.2249888 [Google Scholar]
  16. Mohanavel, V., Ravichandran, M., Sathish, T., Kumar, S. S., Ravikumar, M. M., Mahendiran, S., & Nathan, L. Y. (2019). Tribological And Mechanical Behaviour Of Composites Fabricated Via Compo Casting, Stir Casting And In Situ Casting–An Overview. Journal of the Balkan Tribological Association, 25(2). [Google Scholar]
  17. Shashi Prakash Dwivedi, Shubham Sharma, B. Vijay Krishna, Pankaj Sonia, Kuldeep Kumar Saxena, Amjad Iqbal & Faramarz Djavanroodi (2023) Effect of the addition of TiB2 with waste glass powder on microstructure, mechanical and physical behavior of PET-based polymer composite material, Mechanics of Advanced Materials and Structures. [Google Scholar]
  18. Samyal, R., Bagha, A. K., Bedi, R., Bahl, S., Saxena, K. K., & Sehgal, S. (2021). Predicting the effect of fiber orientations and boundary conditions on the optimal placement of PZT sensor on the composite structures. Materials Research Express, 8(7), 075302. [Google Scholar]
  19. Krishna, U. G., Vasudeva, B., Auradi, V., & Nagaral, M. (2021). Effect of percentage variation on wear behaviour of tungsten carbide and cobalt reinforced Al7075 matrix composites synthesized by melt stirring method. Journal of Bio-and Tribo-Corrosion, 7(3), 89. [Google Scholar]
  20. Dwivedi SP, Chaudhary V, Sharma S, Sharma S. Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). [Google Scholar]
  21. Raghu, M. S., Kumar, C. P., Prashanth, M. K., Kumar, K. Y., Prathibha, B. S., Kanthimathi, G., … & Osman, S. M. (2021). Novel 1, 3, 5-triazine-based pyrazole derivatives as potential antitumor agents and EFGR kinase inhibitors: Synthesis, cytotoxicity, DNA binding, molecular docking and DFT studies. New Journal of Chemistry, 45(31), 13909–13924. [Google Scholar]
  22. Mathalai Sundaram, C., Radha Krishnan, B., Harikishore, S., & Vijayan, V. (2020). Wear behavior of B4C reinforced Al 6063 matrix composite electrodes fabricated by stir casting method. Transactions of the Canadian Society for Mechanical Engineering, 45(2), 199–210. [Google Scholar]
  23. Ram, J. P., Pillai, D. S., Ghias, A. M., & Rajasekar, N. (2020). Performance enhancement of solar PV systems applying P&O assisted Flower Pollination Algorithm (FPA). Solar Energy, 199, 214–229. [Google Scholar]
  24. Kumaraswamy, H. S., Bharat, V., & Rao, T. K. (2018). Influence of Mechanical &tribological BehaviourOf Al 2024 MMC Fabricated by Stir Casting Technique-A Review. Materials Today: Proceedings, 5(5), 11962–11970. [Google Scholar]
  25. Vandana, C. P., & Chikkamannur, A. A. (2021). Feature selection: An empirical study. International Journal of Engineering Trends and Technology, 69(2), 165–170. [Google Scholar]
  26. Jaswanth, A., & Anbuchezhiyan, G. (2023). Al-Mg-Cr alloy composites with WC reinforcement and cast alloy: Comparison of ultimate tensile strength. Journal of Survey in Fisheries Sciences, 10(1S), 1854–1865. [Google Scholar]
  27. Yogananda, H. S., Basavaraj, R. B., Darshan, G. P., Prasad, B. D., Naik, R., Sharma, S. C., & Nagabhushana, H. (2018). New design of highly sensitive and selective MoO3: Eu3+ micro-rods: Probing of latent fingerprints visualization and anti-counterfeiting applications. Journal of colloid and interface science, 528, 443–456. [Google Scholar]
  28. Patel, S. K., Singh, V. P., Kumar, D., Roy, B. S., & Kuriachen, B. (2022). Microstructural, mechanical and wear behavior of A7075 surface composite reinforced with WC nanoparticle through friction stir processing. Materials Science and Engineering: B, 276, 115476. [Google Scholar]
  29. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;0(0). [Google Scholar]
  30. Spandana, K., & Rao, V. S. (2018). Internet of things (Iot) based smart water quality monitoring system. International Journal of Engineering & Technology, 7(3.6), 259–262. [Google Scholar]
  31. Veerappan, G., Ravichandran, M., Alagarsamy, S. V., & Mohanavel, V. (2022). Microstructure, mechanical and wear properties of boron carbide reinforced nickel alloy composites processed by bottom pouring type stir casting process. Surface Topography: Metrology and Properties, 10(1), 015041. [Google Scholar]
  32. Dhawan, A., Gupta, N., Goyal, R., & Saxena, K. K. (2021). Evaluation of mechanical properties of concrete manufactured with fly ash, bagasse ash and banana fibre. Materials Today: Proceedings, 44, 17–22. [Google Scholar]
  33. Yigezu, B. S., Jha, P. K., & Mahapatra, M. M. (2013). The key attributes of synthesizing ceramic particulate reinforced Al-based matrix composites through stir casting process: a review. Materials and Manufacturing Processes, 28(9), 969–979. [Google Scholar]
  34. Dwivedi, S.P., Chaudhary, V. & Sharma, S. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. Inter Metalcast (2023). [Google Scholar]
  35. Prakash, S., Somiya, G., Elavarasan, N., Subashini, K., Kanaga, S., Dhandapani, R., … & Sujatha, V. (2021). Synthesis and characterization of novel bioactive azo compounds fused with benzothiazole and their versatile biological applications. Journal of Molecular Structure, 1224, 129016. [Google Scholar]
  36. Huang, G., Hou, W., & Shen, Y. (2018). Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing. Materials characterization, 138, 26–37. [Google Scholar]
  37. Kumar, K. U., Babu, P., Basavapoornima, C., Praveena, R., Rani, D. S., & Jayasankar, C. K. (2022). Spectroscopic properties of Nd3+-doped boro-bismuth glasses for laser applications. Physica B: Condensed Matter, 646, 414327. [Google Scholar]
  38. Mohanavel, V., Rajan, K., Senthil, P. V., & Arul, S. (2017). Mechanical behaviour of hybrid composite (AA6351+ Al2O3+ Gr) fabricated by stir casting method. Materials Today: Proceedings, 4(2), 3093–3101. [Google Scholar]
  39. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., … & Galal, A. M. (2022). Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35, 102113. [Google Scholar]
  40. Sridhara, V., Gowrishankar, B. S., Snehalatha, & Satapathy, L. N. (2009). Nanofluids—a new promising fluid for cooling. Transactions of the Indian Ceramic Society, 68(1), 1–17. [Google Scholar]
  41. Bharath, V., Nagaral, M., Auradi, V., & Kori, S. A. (2014). Preparation of 6061Al-Al2O3 MMC’s by stir casting and evaluation of mechanical and wear properties. Procedia materials science, 6, 1658–1667. [Google Scholar]
  42. Shashi Prakash Dwivedi, Indradeep Kumar, Shankar Sehgal, Nakul Gupta & Kuldeep K. Saxena (2023) Development of dissimilar AA2014 and AA2024 based composite with nano-Si3N4 reinforcement by friction stir process technique, Journal of Adhesion Science and Technology. [Google Scholar]
  43. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. (2018). Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4(3). [Google Scholar]
  44. Nirala, A., Soren, S., Kumar, N., & Kaushal, D. R. (2020). A comprehensive review on mechanical properties of Al-B4C stir casting fabricated composite. Materials Today: Proceedings, 21, 1432–1435. [Google Scholar]
  45. Shashi Prakash Dwivedi, Shubham Sharma, Changhe Li, Yanbin Zhang, Abhinav Kumar, Rajesh Singh, Sayed M. Eldin, Mohamed Abbas, Effect of nano-TiO2 particles addition on dissimilar AA2024 and AA2014 based composite developed by friction stir process technique, Journal of Materials Research and Technology, Volume 26, 2023, Pages 1872–1881. [Google Scholar]
  46. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482. [Google Scholar]
  47. Kumar, T. S., Shalini, S., Ramu, M., & Thankachan, T. (2020). Characterization of ZrC reinforced AA6061 alloy composites produced using stir casting process. Journal of Mechanical Science and Technology, 34, 143–147. [Google Scholar]
  48. Pethampalayam Karuppanan Miniappan, Sivagnanam Marimuthu*, Selvan Dharani Kumar, Gopal Gokilakrishnan, Shubham Sharma*, Changhe Li, Shashi Prakash Dwivedi, and Mohamed Abbas, ―Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications‖ Reviews on Advanced Materials Science 2023; 62: 20230342 [Google Scholar]
  49. Indira, D. N. V. S. L. S., Ganiya, R. K., Ashok Babu, P., Xavier, A., Kavisankar, L., Hemalatha, S., … & Yeshitla, A. (2022). Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, 2022. [Google Scholar]
  50. Lakshmi, L., Reddy, M. P., Santhaiah, C., & Reddy, U. J. (2021). Smart phishing detection in web pages using supervised deep learning classification and optimization technique adam. Wireless Personal Communications, 118(4), 3549–3564. [Google Scholar]
  51. Kumar, K. Y., Saini, H., Pandiarajan, D., Prashanth, M. K., Parashuram, L., & Raghu, M. S. (2020). Controllable synthesis of TiO2 chemically bonded graphene for photocatalytic hydrogen evolution and dye degradation. Catalysis Today, 340, 170–177. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.