Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01044
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/202450701044
Published online 29 March 2024
  1. Rozhbiany, F. A. R., & Jalal, S. R., Reinforcement and processing on the machinability and mechanical properties of aluminum matrix composites. Journal of Materials Research and Technology, 8, 5 (2019) [Google Scholar]
  2. Dwivedi, S.P. World Journal of Engineering, 14, (2023) [Google Scholar]
  3. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V., Food chemistry, 300, 125178 (2019) [Google Scholar]
  4. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K., Optical Materials, 129, 112482 (2022) [Google Scholar]
  5. Emara, M. M., In IOP Conference Series: Materials Science and Engineering (Vol. 191, 1 (2017) [Google Scholar]
  6. Radhakrishnan, S., Khan, A., Dwivedi, S.P. Biomass Conv. Bioref. (2023). [Google Scholar]
  7. Sridhara, V., Gowrishankar, B. S., Snehalatha, & Satapathy, L. N. Transactions of the Indian Ceramic Society, 68, 1 (2009) [Google Scholar]
  8. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. Heliyon, 4, 3 (2018) [Google Scholar]
  9. Umer, U., Ashfaq, M., Qudeiri, J. A., Hussein, H. M. A., Danish, S. N., & Al-Ahmari, A. R. The International Journal of Advanced Manufacturing Technology, 78, 11711179 (2015) [Google Scholar]
  10. Shashi Prakash Dwivedi, S Selvaprakash, Shubham Sharma, Soni Kumari, Kuldeep K Saxena, Rajesh Goyal, Amjad Iqbal & Faramarz Djavanroodi Mechanics of Advanced Materials and Structures, 10 (2023) [Google Scholar]
  11. Parveez, B., Maleque, M. A., & Jamal, N. A. Journal of Materials Science, 56, 29 (2021) [Google Scholar]
  12. Suganthi, S. T., Vinayagam, A., Veerasamy, V., Deepa, A., Abouhawwash, M., & Thirumeni, M. Sustainable Energy Technologies and Assessments, 47, 101470 (2021) [Google Scholar]
  13. Guluzade, R., Avcı, A., Demirci, M. T., & Erkendirci, Ö. F., Materials & Design, 52 (2013) [Google Scholar]
  14. Shashi Prakash Dwivedi, Shubham Sharma, B. Vijay Krishna, Pankaj Sonia, Kuldeep Kumar Saxena, Amjad Iqbal & Faramarz Djavanroodi, Mechanics of Advanced Materials and Structures, 25 (2023) [Google Scholar]
  15. Raghu, M. S., Kumar, C. P., Prashanth, M. K., Kumar, K. Y., Prathibha, B. S., Kanthimathi, G., ... & Osman, S. M. New Journal of Chemistry, 45, 31 (2021) [Google Scholar]
  16. Spandana, K., & Rao, V. S., International Journal of Engineering & Technology, 7(3.6), (2018) [Google Scholar]
  17. Kurşun, A., Bayraktar, E., & Enginsoy, H. M., Experimental and numerical study of alumina reinforced aluminum matrix composites: Processing, microstructural aspects and properties. Composites Part B: Engineering, 90, (2016) [Google Scholar]
  18. Dwivedi SP, Chaudhary V, Sharma S, Sharma S. Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023) [Google Scholar]
  19. Prakash, S., Somiya, G., Elavarasan, N., Subashini, K., Kanaga, S., Dhandapani, R., Sujatha, V. Journal of Molecular Structure, 1224, 129016 (2021) [Google Scholar]
  20. Muley, A. V., Aravindan, S., & Singh, I. P., Nano and hybrid aluminum based metal matrix composites: an overview. Manufacturing Review, 2, 15 (2015) [Google Scholar]
  21. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 18 (2023) [Google Scholar]
  22. Jayabal, R., Subramani, S., Dillikannan, D., Devarajan, Y., Thangavelu, L., Nedunchezhiyan, M., De Poures, M. V., Energy, 250, 123709 (2022) [Google Scholar]
  23. Kalyani, G., Janakiramaiah, B., Karuna, A., & Prasad, L. N., Diabetic retinopathy detection and classification using capsule networks. Complex & Intelligent Systems, 9(3), (2023)` [Google Scholar]
  24. Kumari, S., Sonia, P., Singh, B., Abhishek, K., & Saxena, K. K., Optimization of surface roughness in EDM of pure magnesium (Mg) using TLBO. Materials Today: Proceedings, 26 (2020) [Google Scholar]
  25. Bhoi, N. K., Singh, H., & Pratap, S., Developments in the aluminum metal matrix composites reinforced by micro/nano particles–a review. Journal of Composite Materials, 54, 6 (2020). [Google Scholar]
  26. Ferreira, L. F. P., Bayraktar, E., Robert, M. H., & Miskioglu, I.,. In Mechanics of Composite and Multi-functional Materials, 7: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics (pp. 145-152). Springer International Publishing, (2017) [Google Scholar]
  27. Dwivedi, S.P., Chaudhary, V. & Sharma, S. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. Inter Metalcast (2023). [Google Scholar]
  28. Kumar, K. Y., Saini, H., Pandiarajan, D., Prashanth, M. K., Parashuram, L., Raghu, M. S. Catalysis Today, 340 (2020) [Google Scholar]
  29. Mahdi, A. S., Effects of reinforcement materials and matrix particle sizes on mechanical properties and wear of recycled aluminum chips, (2017) [Google Scholar]
  30. Shashi Prakash Dwivedi, Indradeep Kumar, Shankar Sehgal, Nakul Gupta & Kuldeep K. Saxena, Journal of Adhesion Science and Technology, (2023) [Google Scholar]
  31. Singh, P., Singh, A. K., Arun, V., & Dixit, H. K., Design and analysis of all-optical half-adder, half-subtractor and 4-bit decoder based on SOA-MZI configuration. Optical and Quantum Electronics, 48, (2016) [Google Scholar]
  32. Samiran, N. A., Rus, M. M., Hassan, N. M., Ishak, M. Z., & Ishak, I. A., Study of Tensile Properties for Aluminum 6061 Reinforced With AISI 1060 Steel Machining Chips. International Journal of Integrated Engineering, 13, 2 (2021) [Google Scholar]
  33. Vandana, C. P., & Chikkamannur, A. A., Feature selection: An empirical study. International Journal of Engineering Trends and Technology, 69, 2 (2021) [Google Scholar]
  34. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., Zhang, W. Applied Surface Science, 512, 145686 (2020) [Google Scholar]
  35. Umer, U., Kishawy, H., Ghandehariun, A., Xie, L., & Al-Ahmari, A., The International Journal of Advanced Manufacturing Technology, 92, (2017) [Google Scholar]
  36. Shashi Prakash Dwivedi, Shubham Sharma, Changhe Li, Yanbin Zhang, Abhinav Kumar, Rajesh Singh, Sayed M. Eldin, Mohamed Abbas, Journal of Materials Research and Technology, Volume 26, (2023) [Google Scholar]
  37. Ram, J. P., Pillai, D. S., Ghias, A. M., & Rajasekar, N., Solar Energy, 199 (2020) [Google Scholar]
  38. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K., Optical and quantum electronics, 48, (2016) [Google Scholar]
  39. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., Galal, A. M., Case Studies in Thermal Engineering, 35, (2022) [Google Scholar]
  40. Pramod, S. L., Bakshi, S. R., & Murty, B. S., Aluminum-based cast in situ composites: a review. Journal of Materials Engineering and Performance, 24 (2015) [Google Scholar]
  41. Pethampalayam Karuppanan Miniappan, Sivagnanam Marimuthu*, Selvan Dharani Kumar, Gopal Gokilakrishnan, Shubham Sharma*, Changhe Li, Shashi Prakash Dwivedi, and Mohamed Abbas, Reviews on Advanced Materials Science, (2023) [Google Scholar]
  42. Gillani, F., Khan, M. Z., & Shah, O. R., Sensitivity analysis of reinforced aluminum based metal matrix composites. Materials, 15, 12 (2022) [Google Scholar]
  43. Awasthi, A., Saxena, K. K., & Arun, V., Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44 (2021) [Google Scholar]
  44. Yogananda, H. S., Basavaraj, R. B., Darshan, G. P., Prasad, B. D., Naik, R., Sharma, S. C., & Nagabhushana, H., New design of highly sensitive and selective MoO3: Eu3+ micro-rods: Probing of latent fingerprints visualization and anti-counterfeiting applications. Journal of colloid and interface science, 528 (2018) [Google Scholar]
  45. Indira, D. N. V. S. L. S., Ganiya, R. K., Ashok Babu, P., Xavier, A., Kavisankar, L., Hemalatha, S., Yeshitla, A. (2022). BioMed Research International (2022) [Google Scholar]
  46. Mistry, J. M., & Gohil, P. P., Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231, 3 (2017) [Google Scholar]
  47. Lakshmi, L., Reddy, M. P., Santhaiah, C., & Reddy, U. J., Wireless Personal Communications, 118, 4 (2021) [Google Scholar]
  48. Spandana, K., & Rao, V. S., International Journal of Engineering & Technology, 7(3.6), (2018) [Google Scholar]
  49. Kumar, K. U., Babu, P., Basavapoornima, C., Praveena, R., Rani, D. S., & Jayasankar, C. K., Physica B: Condensed Matter, 646 (2022) [Google Scholar]
  50. Umer, U., Abidi, M. H., Qudeiri, J. A., Alkhalefah, H., & Kishawy, H., Metals, 10, 6 (2020) [Google Scholar]
  51. Suthar, J., & Patel, K. M., Materials and Manufacturing Processes, 33, 5 (2018) [Google Scholar]
  52. Agarwal, M., & Srivastava, R., Processing effect of Powder-chip based reinforcement in AA6061 Semi solid cast composite. In IOP Conference Series: Materials Science and Engineering, 377, 1 (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.