Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01050
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202450701050
Published online 29 March 2024
  1. Kanth, U. R., Rao, P. S., & Krishna, M. G., Mechanical behaviour of fly ash/SiC particles reinforced Al-Zn alloy-based metal matrix composites fabricated by stir casting method. Journal of Materials Research and Technology, 8, 1 (2019) [Google Scholar]
  2. Selvam, J. D. R., Smart, D. R., & Dinaharan, I., Synthesis and characterization of Al6061-Fly Ashp-SiCp composites by stir casting and compocasting methods. Energy procedia, 34 (2013) [Google Scholar]
  3. Shashi Prakash Dwivedi, S Selvaprakash, Shubham Sharma, Soni Kumari, Kuldeep K Saxena, Rajesh Goyal, Amjad Iqbal & Faramarz Djavanroodi, Mechanics of Advanced Materials and Structures, 14 (2023) [Google Scholar]
  4. Gurusamy, P., Tamilselvan, S., Saravanan, S., & Gopal, D. N., Materials Today: Proceedings, 33 (2020) [Google Scholar]
  5. Kalyani, G., Janakiramaiah, B., Karuna, A., & Prasad, L. N., Complex & Intelligent Systems, 9, 3 (2023) [Google Scholar]
  6. Vandana, C. P., & Chikkamannur, A. A. Feature selection: An empirical study. International Journal of Engineering Trends and Technology, 69(2), (2021). [Google Scholar]
  7. Narendranath, S., & Chakradhar, D., Studies on microstructure and mechanical characteristics of as cast AA6061/SiC/fly ash hybrid AMCs produced by stir casting. Materials Today: Proceedings, 20, A1-A5. (2020). [Google Scholar]
  8. Kumar, A., Singh, R. C., Chaudhary, R., & Singh, V. P., Tribological studies and microstructural characterisation of SiC and fly ash particles based aluminium 2024 alloy composites prepared through stir casting route. In IOP Conference Series: Materials Science and Engineering, 804, 1 (2020) [Google Scholar]
  9. Shashi Prakash Dwivedi, Shubham Sharma, B. Vijay Krishna, Pankaj Sonia, Kuldeep Kumar Saxena, Amjad Iqbal & Faramarz, Djavanroodi Effect of the addition of TiB2 with waste glass powder on microstructure, mechanical and physical behavior of PET-based polymer composite material, Mechanics of Advanced Materials and Structures, (2023) [Google Scholar]
  10. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K., Design and performance analysis of SOA–MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48 (2016) [Google Scholar]
  11. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., Galal, A. M., Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35 (2022) [Google Scholar]
  12. Shanmughasundaram, P., Subramanian, R., & Prabhu,. Some studies on aluminium–fly ash composites fabricated by two step stir casting method. European journal of scientific research, 63(2), (2011) [Google Scholar]
  13. Dwivedi SP, Chaudhary V, Sharma S, Sharma S. Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023) [Google Scholar]
  14. Awasthi, A., Saxena, K. K., & Arun, V., Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205-219). Woodhead Publishing, (2020) [Google Scholar]
  15. Spandana, K., & Rao, V. S., Internet of things (Iot) based smart water quality monitoring system. International Journal of Engineering & Technology, 7, 3.6 (2018) [Google Scholar]
  16. Prakash, S., Somiya, G., Elavarasan, N., Subashini, K., Kanaga, S., Dhandapani, R., ... & Sujatha, V. Synthesis and characterization of novel bioactive azo compounds fused with benzothiazole and their versatile biological applications. Journal of Molecular Structure, 1224, 129016 (2021) [Google Scholar]
  17. Rajesh, S., Kumar, R. S., Madhankumar, S., Sheshan, M., Vignesh, M., & Kumar, R. S., Study of the mechanical properties of Al7075 alloy, silicon carbide and fly ash composites manufactured by stir casting technique. Materials Today: Proceedings, 45, 6438-6443(2021) [Google Scholar]
  18. Dwivedi SP, Yadav AK, Saxena A, Dwivedi VK. Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023) [Google Scholar]
  19. Devanathan, R., Ravikumar, J., Boopathi, S., Selvam, D. C., & Anicia, S. A., Influence in mechanical properties of stir cast aluminium (AA6061) hybrid metal matrix composite (HMMC) with silicon carbide, fly ash and coconut coir ash reinforcement. Materials Today: Proceedings, 22, (2020) [Google Scholar]
  20. Dwivedi, S.P., Chaudhary, V. & Sharma, S. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. Inter Metalcast (2023) [Google Scholar]
  21. Beniwal, G., & Saxena, K. K., A review on pore and porosity in tissue engineering. Materials Today: Proceedings, 44, (2021) [Google Scholar]
  22. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R., Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4(3). (2018) [Google Scholar]
  23. Kumar, H., Devade, K., Singh, D. P., Giri, J. M., Kumar, M., & Arun, V., Severe plastic deformation: A state of art. Materials Today: Proceedings. (2023) [Google Scholar]
  24. Ram, J. P., Pillai, D. S., Ghias, A. M., & Rajasekar, N., Performance enhancement of solar PV systems applying P&O assisted Flower Pollination Algorithm (FPA). Solar Energy, 199, (2020) [Google Scholar]
  25. Canute, X., & Majumder, M. C., Mechanical and tribological behaviour of stir cast aluminium/boron carbide/fly ash composites. Journal of Engineering Science and Technology, 13, 3 (2018) [Google Scholar]
  26. Shashi Prakash Dwivedi, Indradeep Kumar, Shankar Sehgal, Nakul Gupta & Kuldeep K. Saxena Development of dissimilar AA2014 and AA2024 based composite with nano-Si3N4 reinforcement by friction stir process technique, Journal of Adhesion Science and Technology, (2023) [Google Scholar]
  27. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., Zhang, W. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, (2020) [Google Scholar]
  28. Jayabal, R., Subramani, S., Dillikannan, D., Devarajan, Y., Thangavelu, L., Nedunchezhiyan, M., ... & De Poures, M. V.. Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends. Energy, 250, 123709, (2022) [Google Scholar]
  29. Kumar, G. K., & Sankar, C. B.. Mechanical Behaviour of Silicon Carbide (Sic)/Fly Ash Particles Reinforced Aluminium-7075 Based Metal Matrix Composite Fabricated by Stir Casting Method, (2019) [Google Scholar]
  30. Shashi Prakash Dwivedi, Shubham Sharma, Changhe Li, Yanbin Zhang, Abhinav Kumar, Rajesh Singh, Sayed M. Eldin, Mohamed Abbas, Journal of Materials Research and Technology, 26, (2023) [Google Scholar]
  31. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K., Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482, (2022) [Google Scholar]
  32. Raghu, M. S., Kumar, C. P., Prashanth, M. K., Kumar, K. Y., Prathibha, B. S., Kanthimathi, G., ... & Osman, S. M. Novel 1, 3, 5-triazine-based pyrazole derivatives as potential antitumor agents and EFGR kinase inhibitors: Synthesis, cytotoxicity, DNA binding, molecular docking and DFT studies. New Journal of Chemistry, 45, 31 (2021) [Google Scholar]
  33. Awasthi, A., Saxena, K.K., Arun, V., Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205-219). Woodhead Publishing, (2020) [Google Scholar]
  34. Ravesh, S. K., & Garg, T. K.. Preparation & analysis for some mechanical property of aluminium based metal matrix composite reinforced with SiC & fly ash. International Journal of Engineering Research and Applications, 2, 6 (2012) [Google Scholar]
  35. Pethampalayam Karuppanan Miniappan, Sivagnanam Marimuthu*, Selvan Dharani Kumar, Gopal Gokilakrishnan, Shubham Sharma*, Changhe Li, Shashi Prakash Dwivedi, and Mohamed Abbas, “Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications” Reviews on Advanced Materials Science, 26 (2023) [Google Scholar]
  36. Suganthi, S. T., Vinayagam, A., Veerasamy, V., Deepa, A., Abouhawwash, M., & Thirumeni, M. Detection and classification of multiple power quality disturbances in Microgrid network using probabilistic based intelligent classifier. Sustainable Energy Technologies and Assessments, 47, 101470 (2021) [Google Scholar]
  37. Kumar, H., Devade, K., Singh, D. P., Giri, J. M., Kumar, M., & Arun, V. Severe plastic deformation: A state of art. Materials Today: Proceedings (2023) [Google Scholar]
  38. Reddy, B. R., & Srinivas, C. Fabrication and characterization of silicon carbide and fly ash reinforced aluminium metal matrix hybrid composites. Materials Today: Proceedings, 5(2), 8374-838 (2018) [Google Scholar]
  39. Indira, D. N. V. S. L. S., Ganiya, R. K., Ashok Babu, P., Xavier, A., Kavisankar, L., Hemalatha, S., ... & Yeshitla, A. Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, (2022) [Google Scholar]
  40. Sridhara, V., Gowrishankar, B. S., Snehalatha, & Satapathy, L. N. Nanofluids—a new promising fluid for cooling. Transactions of the Indian Ceramic Society, 68(1), (2009) [Google Scholar]
  41. Santhosh, M. S., Natrayan, L., Kaliappan, S., Patil, P. P., Rao, Y. S., Kumar, T. N., ... & Paramasivam, P. Mechanical and wear behaviour of nano-fly ash particle-reinforced mg metal matrix composites fabricated by stir casting technique. Journal of Nanomaterials, (2022) [Google Scholar]
  42. Rajkumar, G.; Saravanan, M.; Bejaxhin, A.B.H.; Sharma, S.; Dwivedi, S.P.; Kumar, R.; Singh, S. Parametric Optimization of Powder-Mixed EDM of AA2014/Si3N4/Mg/Cenosphere Hybrid Composites Using Fuzzy Logic: Analysis of Mechanical, Machining, Microstructural, and Morphological Characterizations. J. Compos. Sci., 7, 33 (2023) [Google Scholar]
  43. Singh, P., Singh, A. K., Arun, V., & Dixit, H. K., Design and analysis of all-optical half-adder, half-subtractor and 4-bit decoder based on SOA-MZI configuration. Optical and Quantum Electronics, 48 (2016) [Google Scholar]
  44. Kumar, K. U., Babu, P., Basavapoornima, C., Praveena, R., Rani, D. S., & Jayasankar, C. K. Spectroscopic properties of Nd3+-doped boro-bismuth glasses for laser applications. Physica B: Condensed Matter, 646, (2022) [Google Scholar]
  45. Parashuram, L., Sreenivasa, S., Akshatha, S., & Udayakumar, V., A non-enzymatic electrochemical sensor based on ZrO2: Cu (I) nanosphere modified carbon paste electrode for electro-catalytic oxidative detection of glucose in raw Citrus aurantium var. sinensis. Food chemistry, 300, 125178 (2019) [Google Scholar]
  46. Sachinkumar, Narendranath, S., & Chakradhar, D. Microstructure, hardness and tensile properties of friction stir welded aluminum matrix composite reinforced with SiC and fly ash. Silicon, 11, 2557-2565 (2019) [Google Scholar]
  47. Shashi Prakash Dwivedi & Shubham Sharma, Effect of Ni addition on the behavior of dissimilar A356-AZ91/CeO2 aluminum-magnesium based composite fabricated by friction stir process technique, Composite Interfaces (2023) [Google Scholar]
  48. Yogananda, H. S., Basavaraj, R. B., Darshan, G. P., Prasad, B. D., Naik, R., Sharma, S. C., & Nagabhushana, H. New design of highly sensitive and selective MoO3: Eu3+ micro-rods: Probing of latent fingerprints visualization and anti-counterfeiting applications. Journal of colloid and interface science, 528 (2018) [Google Scholar]
  49. Lal, S., Kumar, S., Kumar, A., & Patel, L., Fabrication and characterization of hybrid metal matrix composite Al-2014/SiC/Fly Ash fabricated using stir casting process. Materials Today: Proceedings, 49, 3155-3163 (2022). [Google Scholar]
  50. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K., Design and performance analysis of SOA–MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, (2016) [Google Scholar]
  51. Spandana, K., & Rao, V. S. Internet of things (Iot) based smart water quality monitoring system. International Journal of Engineering & Technology, 7(3.6), (2018) [Google Scholar]
  52. Lakshmi, L., Reddy, M. P., Santhaiah, C., & Reddy, U. J. Smart phishing detection in web pages using supervised deep learning classification and optimization technique adam. Wireless Personal Communications, 118, 4 (2021) [Google Scholar]
  53. Kumar, K. Y., Saini, H., Pandiarajan, D., Prashanth, M. K., Parashuram, L., & Raghu, M. S. Controllable synthesis of TiO2 chemically bonded graphene for photocatalytic hydrogen evolution and dye degradation. Catalysis Today, 340 (2020) [Google Scholar]
  54. Suragimath, P. K., & Purohit, G. K. A study on mechanical properties of aluminium alloy (LM6) reinforced with SiC and fly ash. IOSR J. Mech. Civ. Eng, 8, 5 (2013) [Google Scholar]
  55. Kumar, H., Devade, K., Singh, D. P., Giri, J. M., Kumar, M., & Arun, V. Severe plastic deformation: A state of art. Materials Today: Proceedings, (2023) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.