Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01079
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/202450701079
Published online 29 March 2024
  1. Bernstein, Steven. “The United Nations and the governance of sustainable development goals.” Governing through goals: Sustainable Development Goals as governance innovation (2017): 213-240. [Google Scholar]
  2. Pereira, João Márcio Mendes. “Does the World Bank’s action mitigate or exacerbate the global pandemic’s impact?.” Cadernos de Saúde Pública 36 (2020): e00230620. [CrossRef] [Google Scholar]
  3. World Health Organization, (accessed Jun. 01, 2020). http://www.who.int/phe/infographics/breathe-life/es/ [Google Scholar]
  4. I Nogueira, L. A. H., Souza, G. M., Cortez, L. A. B., & de Brito Cruz, C. H. (2020). Biofuels for transport. In Future Energy (pp. 173-197). Elsevier. [Google Scholar]
  5. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [CrossRef] [Google Scholar]
  6. Ranjan, Nishant, Ranvijay Kumar, Sandeep Kumar, Deepak Kumar, and Kuldeep K. Saxena. “Innovative high-performance metal reinforced polymers composites for 3D printing applications: a review.” Advances in Materials and Processing Technologies (2023): 1-14. [Google Scholar]
  7. M. Kriechbaum, J. López Prol, and A. Posch, “Looking back at the future: Dynamics of collective expectations about photo-voltaic technology in Germany & Spain, Technol”. Forecast. Soc. Change, 129 (2018): 76–87. doi: 10.1016/j.techfore.2017.12.003 [CrossRef] [Google Scholar]
  8. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., ... & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279-288. [CrossRef] [Google Scholar]
  9. B. Bayer, P. Matschoss, H. Thomas, and A. Marian, The German experience with integrating photo-voltaic systems into the low-voltage grids, Renew. Energy, 119 (2018): 129–141. doi: 10.1016/j.renene.2017.11.045 [CrossRef] [Google Scholar]
  10. M. Frangou, M. Aryblia, S. Tournaki, and T. Tsoutsos, “Renewable-energy performance contracting in the tertiary sector Standardization to overcome barriers in Greece, Renew”. Energy, 125 (2018): 829–839. doi: 10.1016/j.renene.2018.03.001 [Google Scholar]
  11. D.-C. Bălan, “Behavior of photo-voltaic systems connected to the distribution network: Case study, photo-voltaic power plants in the distribution network of the SDEE Mureș operator”. Procedia Manuf., 22, (2018): 803–810. doi: 10.1016/j.promfg.2018.03.114 [CrossRef] [Google Scholar]
  12. Singh, Dalip, Veena Dhayal, Kuldeep K. Saxena, Ajay Saini, and Ashish Goyal. “Design and influence of precursor concentration and volume, over quality of alumina coating and their corrosion behavior.” International Journal on Interactive Design and Manufacturing (IJIDeM) (2022): 1-7. [Google Scholar]
  13. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356-364. [CrossRef] [Google Scholar]
  14. C.-D. Dumitru and A. Gligor, “An approach to photo-voltaic based power supply designing of a Transylvanian rural community”. Procedia Manuf., 22 (2018): 826–832. doi: 10.1016/j.promfg.2018.03.117 [CrossRef] [Google Scholar]
  15. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., ... & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [CrossRef] [PubMed] [Google Scholar]
  16. S. Freitas, C. Reinhart, and M. C. Brito, “Minimizing storage needs for large scale photo-voltaics in the urban environment Sol”. Energy, 159 (2018): 375–389. doi:10.1016/j.solener.2017.11.011 [Google Scholar]
  17. J. Koch and O. Christ, “Household participation in an urban photo-voltaic project in Switzerland: Exploration of triggers and barriers, Sustain”. Cities Soc., 37 (2018): 420–426. 10.1016/j.scs.2017.10.028 [CrossRef] [Google Scholar]
  18. M. R. Clot, P. Rosa-Clot, and G. M. Tina, “Submerged PV Solar Panel for Swimming Pools: SP3”. Energy Procedia, 134 (2017):567–576. doi: 10.1016/j.egypro.2017.09.565 [CrossRef] [Google Scholar]
  19. P. Schmitter, K. S. Kibret, N. Lefore, and J. Barron, “Suitability mapping framework for solar photo-voltaic pumps for smallholder farmers in sub-Saharan Africa” Appl. Geogr., 94 (2018): 41–57. doi: 10.1016/j.apgeog.2018.02.008 [CrossRef] [Google Scholar]
  20. M. Benghanem, K. O. Daffallah, and A. “Almohammedi, Estimation of daily flow rate of photo-voltaic water pumping systems using solar radiation data”. Results Phys, 8 (2018): 949–954, doi: 10.1016/j.rinp.2018.01.022 [CrossRef] [Google Scholar]
  21. O. M. Roche and R. E. Blanchard, “Design of a solar energy centre for providing lighting and income-generating activities for off-grid rural communities in Kenya, Renew”. Energy, 118 (2018): 685–694. doi: 10.1016/j.renene.2017.11.053 [Google Scholar]
  22. Alkorbi, A. S., Kumar, K. Y., Prashanth, M. K., Parashuram, L., Abate, A., Alharti, F. A., ... & Raghu, M. S. (2022). Samarium vanadate affixed sulfur self doped g-C3N4 heterojunction; photocatalytic, photoelectrocatalytic hydrogen evolution and dye degradation. International Journal of Hydrogen Energy, 47(26), 12988-13003. [CrossRef] [Google Scholar]
  23. A. Ferreira et al., “Economic overview of the use and production of photo-voltaic solar energy in brazil, Renew. Sustain”. Energy Rev., 81 (2018): 181–191.doi: 10.1016/j.rser.2017.06.102 [Google Scholar]
  24. D. Rodríguez-Urrego and L. “Rodríguez-Urrego, Photo-voltaic energy in Colombia: Current status, inventory, policies and future prospects, Renew, Sustain”. Energy Rev., 92 (2018) 160–170. doi: 10.1016/j.rser.2018.04.065 [CrossRef] [Google Scholar]
  25. A. Vides-Prado et al., “Techno-economic feasibility analysis of photo-voltaic systems in remote areas for indigenous communities in the Colombian Guajira, Renew, Sustain”. Energy Rev., 82 (2018): 4245–4255. doi: 10.1016/j.rser.2017.05.101 [Google Scholar]
  26. Goud, J. Suresh, Pudhari Srilatha, RS Varun Kumar, K. Thanesh Kumar, Umair Khan, Zehba Raizah, Harjot Singh Gill, and Ahmed M. Galal. “Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat.” Case Studies in Thermal Engineering 35 (2022): 102113. [Google Scholar]
  27. Y. Xu, J. Li, Q. Tan, A. L. Peters, and C. Yang, “Global status of recycling waste solar panels: A review”. Waste Manag., 75 (2018): 450–458. doi: 10.1016/j.wasman.2018.01.036 [CrossRef] [Google Scholar]
  28. A. Gurung and Q. Qiao, “Solar Charging Batteries: Advances, Challenges, and Opportunities”. Joule, 2(7) (2018): 1217–1230. doi: 10.1016/j.joule.2018.04.006 [CrossRef] [Google Scholar]
  29. R. López-Vizcaíno, E. Mena, M. Millán, M. A. Rodrigo, and J. Lobato, “Performance of a vanadium redox flow battery for the storage of electricity produced in photo-voltaic solar panels, Renew”. Energy, 114 (2017): 1123–1133. doi: 10.1016/j.renene.2017.07.118 [Google Scholar]
  30. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114-117). IEEE. [Google Scholar]
  31. Pandya, D. J., Pandian, P. M., Kumar, I., Parmar, A., Singh, N., Abd Al-saheb, A. J., & Arun, V. (2023). Supercapacitors: Review of materials and fabrication methods. Materials Today: Proceedings. [Google Scholar]
  32. A. Syafiq, A. K. Pandey, N. N. Adzman, and N. A. Rahim, “Advances in approaches and methods for self-cleaning of solar photo-voltaic panels, Sol”. Energy, 162 (2018): 597–619. [Google Scholar]
  33. Misra, Joy Prakash, Vishwajeet Kumar, and Dr Kuldeep Kumar Saxena. “Current Status and Way Forward of Microwave Hybrid Heating in India: A Bibliometric Analysis.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, 1 (2023): 9-20. [Google Scholar]
  34. D. Deb and N. L. Brahmbhatt, “Review of yield increase of solar panels through soiling prevention, and a proposed water-free automated cleaning solution, Renew”. Sustain. Energy Rev., 82 (2018): 3306–3313. doi: 10.1016/j.rser.2017.10.014 [CrossRef] [Google Scholar]
  35. Jurwall, Varun, Ashok Kumar Sharma, Anand Pandey, Ashish Goyal, S. K. Joshi, Lovi Raj Gupta, and Kuldeep Kumar Saxena. “Physio-mechanical and tribological characterisation of aluminium alloy matrix composite: an effect of nano/micro fillers.” Advances in Materials and Processing Technologies (2023): 1-9. [Google Scholar]
  36. A. Grassi, M. Delogu, N. Baldanzini, L. Berzi, and M. Pierini, “Structural analysis of a mobile device for the End– of–Life treatment of photo-voltaic panels”. Procedia Struct. Integr., 8 (2018): 594–603. doi: 10.1016/j.prostr.2017.12.058 [CrossRef] [Google Scholar]
  37. Sharma, Amit, Priyanka Joshi, and Kuldeep K. Saxena. “Empirical modeling and optimization of kerf characteristics in Nd-YAG laser cutting of Al 6061-T6 sheet.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022): 09544089221112071. [Google Scholar]
  38. Bhukya, Muralidhar Nayak, Venkata Reddy Kota, and Shobha Rani Depuru. “A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion.” IEEE access 7 (2019): 4383143845. [CrossRef] [Google Scholar]
  39. Kota, Venkata Reddy, and Muralidhar Nayak Bhukya. “A novel global MPP tracking scheme based on shading pattern identification using artificial neural networks for photovoltaic power generation during partial shaded condition.” IET Renewable Power Generation 13, 10 (2019): 1647-1659. [CrossRef] [Google Scholar]
  40. Bisht, P. S., & Awasthi, A. (2020). Design and Analysis of Composite and Al Alloy Wheel Rim. In Advances in Materials Engineering and Manufacturing Processes: Select Proceedings of ICFTMM 2019 (pp. 15-29). Springer Singapore. [Google Scholar]
  41. Jaidass, N., C. Krishna Moorthi, A. Mohan Babu, and M. Reddi Babu. “Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon 4, e00555 (2018).” DOI: https://doi. org/10.1016/j. heliyon (2018): e00555. [CrossRef] [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.