Open Access
| Issue |
E3S Web of Conf.
Volume 508, 2024
International Conference on Green Energy: Intelligent Transport Systems - Clean Energy Transitions (GreenEnergy 2023)
|
|
|---|---|---|
| Article Number | 08002 | |
| Number of page(s) | 9 | |
| Section | Sustainability and Decarbonization | |
| DOI | https://doi.org/10.1051/e3sconf/202450808002 | |
| Published online | 05 April 2024 | |
- V. Bulgakov, V. Nadykto, S. Ivanovs, I. Dukulis, Improving the performance of a ploughing tractor by means of an auxiliary carriage with motorized axle, Journal of Agricultural Engineering 52(1), 9–16 (2021) doi: 10.4081/jae.2021.1109 [Google Scholar]
- S. Ivanovs, V. Bulgakov, V. Nadykto, Y. Ihnatiev, S. Smolinskyi, Z. Kiernicki, Experimental study of the movement controllability of a machine-and-tractor aggregate of the modular type, INMATEH - Agricultural Engineering, 61(2), 9–16 (2020) doi: 10.35633/inmateh-61-01 [CrossRef] [Google Scholar]
- V. Pădureanu, M.I. Lupu, C.M. Canja, Theoretical research to improve traction performance of wheeled tractors by using a suplementary driven axle, Computational Mechanics and Virtual Engineering, October, 410–415 (2013). [Google Scholar]
- M. Simikić, N. Dedović, L. Savin, M. Tomić, O. Ponjičan, Power delivery efficiency of a wheeled tractor at oblique drawbar force, Soil and Tillage Research 141, 32–43 (2014) doi: http://doi.org/10.1016/j.still.2014.03.010 [CrossRef] [Google Scholar]
- M. Askari, M.H. Komarizade, A.M. Nikbakht, N. Nobakht, R.F. Teimourlou, A novel three-point hitch dynamometer to measure the draft requirement of mounted implements, Research in Agricultural Engineering 57(4), 128–136 (2011) doi: 10.17221/16/2011-rae [CrossRef] [Google Scholar]
- P. Portes, F. Bauer, J. Cupra, Laboratory-experimental verification of calculation of force effects in tractor’s three-point hitch acting on driving wheels, Soil and Tillage Research 128, 81–90 (2013) doi: 10.1016/j.still.2012.10.007 [CrossRef] [Google Scholar]
- A. Al-Janobi, S. Al-Hamed, A. Aboukarima, Y. Almajhadi, Modeling of Draft and Energy Requirements of a Moldboard Plow Using Artificial Neural Networks Based on Two Novel Variables, Engenharia Agrícola 40(3), 363–373 (2020) doi: 10.1590/1809-4430-Eng.Agric.v40n3p363-373/2020 MODELING [CrossRef] [Google Scholar]
- A.M. Mamkagh, Effect of Tillage Speed, Depth, Ballast Weight and Tire Inflation Pressure on the Fuel Consumption of the Agricultural Tractor: A Review, Journal of Engineering Research and Reports 3(2), 1–7 (2018) doi: 10.9734/jerr/2018/v3i216871 [CrossRef] [Google Scholar]
- M. Ucgul, C. Saunders, J.M. Fielke, Discrete element modelling of top soil burial using a full- scale mouldboard plough under field conditions, Biosystems Engineering 160(160), 140–153 (2017) doi: 10.1016/j.biosystemseng.2017.06.008 [CrossRef] [Google Scholar]
- A. Janulevicius, V. Damanauskas, Validation of relationships between tractor performance indicators, engine control unit data and field dimensions during tillage, Mechanical Systems and Signal Processing 191, 110201 (2023) doi: 10.1016/j.ymssp.2023.110201 [CrossRef] [Google Scholar]
- V. Nadykto, V. Kyurchev, V. Bulgakov, P. Findura, O. Karaiev, Influence of the Plough with Tekrone Mouldboards and Landsides on Ploughing Parameters, Acta Technologica Agriculturae 23(1), 40–45 (2020) doi: 10.2478/ata-2020-0007 [CrossRef] [Google Scholar]
- M.V. Sidorov, I.P. Troyanovskaya, V.A. Sokolova, S.A. Partko, A.M.S. Dzjasheev, A.A. Ivanov, E.V. Kopaev, Investigation of the damping properties of the process module for a tractor of traction class 1.4. IOP Conference Series: Earth and Environmental Science 839(5), 1–6 (2021) doi: 10.1088/1755-1315/839/5/052056 [Google Scholar]
- V.N. Sidorov, S.A. Voinash, A.A. Ivanov, S.A. Petrov, Modular-Technological Scheme for Tractors of Traction Classes 1.4. IOP Conference Series: Earth and Environmental Science 666(4), 042048 (2021) doi: 10.1088/1755-1315/666/4/042048 [CrossRef] [Google Scholar]
- B.A. Dospekhov, Field experiment methodology (with the basics of statistical processing of research results), Moscow: Agropromizdat (1985). [Google Scholar]
- V. Bulgakov, V. Nadykto, V. Kaminskiy, Z. Ruzhylo, V. Volskyi, J. Olt, Experimental research into the effect of harrowing unit’s operating speed on uniformity of cultivation depth during tillage in fallow field, Agronomy Research 18(3), 1962–1972 (2020) doi: 10.15159/AR.20.200 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.