Wood Research at the University of Sopron – Physical-mechanical Properties

Open Access

Issue		E3S Web Conf. Volume 514, 2024 2024 10^th International Conference on Environment and Renewable Energy (ICERE 2024)


Article Number		04002
Number of page(s)		12
Section		Green Building Materials and Indoor Air Quality
DOI		https://doi.org/10.1051/e3sconf/202451404002
Published online		11 April 2024

M. Báder, and R. Németh, Moisture-dependent mechanical properties of longitudinally compressed wood, Eur. J. Wood Prod. 77 (2019) 1009–1019. doi:10.1007/s00107-019-01448-1. [CrossRef] [Google Scholar]
M. Bak, F. Molnár, R. Rákosa, Z. Németh, and R. Németh, Dimensional stabilization of wood by microporous silica aerogel using in-situ polymerization, Wood Sci Technol. 56 (2022) 1353–1375. doi:10.1007/s00226-022-01412-y. [CrossRef] [Google Scholar]
F. Fodor, and M. Bak, Studying the Wettability and Bonding Properties of Acetylated Hornbeam Wood Using PVAc and PUR Adhesives, Materials. 16 (2023) 2046. doi:10.3390/ma16052046. [CrossRef] [PubMed] [Google Scholar]
A. Ghavidel, A. Jorbandian, M. Bak, J. Gelbrich, J.J. Morrell, I. Sandu, and R. Hosseinpourpia, Degradation assessment of archaeological oak (Quercus spp.) buried under oxygen-limited condition, Holzforschung. 77 (2023) 198–207. doi:10.1515/hf-2022-0168. [CrossRef] [Google Scholar]
F. Horváth, M. Bak, and M. Báder, Faanyagok gombaállóságának változása rostirányú tömörítést és további modifikációs eljárásokat követően, Gradus. 8 (2021) 59–65. doi:10.47833/2021.2.ENG.003. [CrossRef] [Google Scholar]
M. Báder, and R. Németh, A review of wood compression along the grain—After the 100th anniversary of pleating, Forests. 14 (2023) 763. doi:10.3390/f14040763. [CrossRef] [Google Scholar]
M. Bak, D. Takács, R. Rákosa, Z.I. Németh, and R. Németh, One-Step Process for the Fabrication of Hydrophobic and Dimensional Stable Wood Using Functionalized Silica Nanoparticles, Forests. 14 (2023) 651. doi:10.3390/f14030651. [CrossRef] [Google Scholar]
Z.A. Köbölkuti, K. Cseke, A. Benke, M. Báder, A. Borovics, and R. Németh, Allelic variation in candidate genes associated with wood properties of cultivated poplars (Populus), BioFut. 70 (2019) 286–294. doi:10.1556/019.70.2019.32. [CrossRef] [PubMed] [Google Scholar]
F. Fodor, M. Bak, A. Bidló, B. Bolodár-Varga, and R. Németh, Biological Durability of Acetylated Hornbeam Wood with Soil Contact in Hungary, Forests. 13 (2022) 1003. doi:10.3390/f13071003. [CrossRef] [Google Scholar]
M. Báder, R. Németh, Á. Vörös, Z. Tóth, and A. Novotni, The effect of agroforestry farming on wood quality and timber industry and its supportation by Horizon 2020, Agroforest Syst. 97 (2023) 587–603. doi:10.1007/s10457-023-00812-8. [CrossRef] [Google Scholar]
M. Bak, F. Molnár, and R. Németh, Improvement of dimensional stability of wood by silica nanoparticles, Wood Material Science & Engineering. 14 (2019) 48–58. doi:10.1080/17480272.2018.1528568. [CrossRef] [Google Scholar]
F. Fodor, M. Bak, and R. Németh, Photostability of Oil-Coated and Stain-Coated Acetylated Hornbeam Wood against Natural Weather and Artificial Aging, Coatings. 12 (2022) 817. doi:10.3390/coatings12060817. [CrossRef] [Google Scholar]
M. Báder, R. Németh, J. Sandak, and A. Sandak, FTIR analysis of chemical changes in wood induced by steaming and longitudinal compression, Cellulose. 27 (2020) 6811–6829. doi:10.1007/s10570-020-03131-8. [CrossRef] [Google Scholar]
K. Cseke, Z.A. Köbölkuti, A. Benke, A. Rumi, M. Báder, A. Borovics, and R. Németh, Nemesnyár klónok faanyagtani jellemzőkhöz köthető génjeinek genetikai változatossága, Erdészettudományi Közlemények. 10 (2020) 5–16. doi:10.17164/EK.2020.001. [Google Scholar]
É. Lublóy, D.T. Mészáros, L.G. Takács, Z. Cimer, and H. Norbert, Examination of the fire performance of wood materials treated with different precautions, J Therm Anal Calorim. 148 (2023) 4129–4140. doi:10.1007/s10973-023-12050-2. [CrossRef] [Google Scholar]
M. Bak, and R. Németh, Effect of different nanoparticle treatments on the decay resistance of wood, BioResources. 13 (2018) 7886–7899. [Google Scholar]
M. Báder, R. Németh, and J. Konnerth, Micromechanical properties of longitudinally compressed wood, Eur J Wood Prod. 77 (2019) 11. doi:10.1007/s00107-019-01392-0. [Google Scholar]
FAO, State of the World’s Forests 2009, Rome, Italy, 2009. [Google Scholar]
F. Steierer, Current wood resources availability and demands national and regional wood resource balances EU/EFTA countries, United Nations, Geneva, Switzerland, 2010. [Google Scholar]
UNECE-FAO, FAO: The European Forest Sector Outlook Study II 2010-2030, United Nations, United Nations Economic Commission for Europe, Food and Agriculture Organization of the United Nations, Geneva, 2011. [Google Scholar]
P.R.J. Shukla, R. Skea, K. Diemen, Ø. Calvin, F. Christophersen, and J. Creutzig, eds., Meeting report of the intergovernmental panel on climate change expert meeting on mitigation sustainability and climate stabilization scenarios, in: IPCC Working Group III Technical Support Unit, London, UK, Imperial College London, 2017. [Google Scholar]
M. Hanewinkel, D. Cullmann, M.J. Schelhaas, G.J. Nabuurs, and N.E. Zimmermann, Climate change may cause severe loss in economic value of European forestland, Nat. Clim. Chang. 3 (2013) 204–207,. doi:10.1038/nclimate1687. [Google Scholar]
V. Altieri, S. Franco, F. Lombardi, P.A. Marziliano, G. Menguzzato, and P. Porto, The role of silvicultural systems and forest types in preventing soil erosion processes in mountain forests: A methodological approach using cesium-137 measurements, J. Soils Sediments. 18 (2018) 1–10,. doi:10.1007/s11368-018-1957-8. [Google Scholar]
K. Updegraff, M.J. Baughman, and S.J. Taff, Environmental benefits of cropland conversion to Hybrid poplar: economic and policy considerations, Biomass Bioenergy. 27 (2004) 411–428. doi:DOI:10.1016/j.biombioe.2004.05.002. [CrossRef] [Google Scholar]
M. Kiaei, Radial variation in wood static bending of naturally and plantation grown alder stems, Cellulose Chem. Technol. 47 (2013) 339–344. [Google Scholar]
G. Ónodi, Az idegenhonos, illetve inváziós fafajok élőhelyformáló hatásai, Erdészettudományi Közlemények. 6 (2016) 101–113. doi:10.17164/EK.2016.008. [Google Scholar]
C. Harvald, and P.O. Olesen, The variation of the basic density within the juvenile wood of Sitka spruce (Picea sitchensis,) Scand, J. For. Res. 2 (1987) 525–53. doi:10.1080/02827588709382488. [Google Scholar]
MSZ 45:2022 Fűrészrönk. Követelmények és megjelölés (Sawlogs. Requirements and marking)., 2022. [Google Scholar]
EN 408:2010+A1:2012: Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties, 2012. [Google Scholar]
ISO 13061-06: Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 06: Determination of ultimate tensile stress parallel to grain, 2014. [Google Scholar]
ISO 13061-03: Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 03: Determination of ultimate strength in static bending, 2014. [Google Scholar]
ISO 13061-17: Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 17: Determination of ultimate stress in compression parallel to grain, 2017. [Google Scholar]
MSZ 6786-11: Test methods for wood materials. Determination of hardness, 1982. [Google Scholar]
EN 338:2016 Structural timber. Strength classes, 2016. [Google Scholar]
S. Molnár, Knowledge of wood (Faanyagismeret), Mezőgazdasági Szaktudás Kiadó, Budapest, Hungary, 2004. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.