EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 516 (2024) E3S Web Conf., 516 (2024) 01010 References
Open Access
Issue
E3S Web Conf.
Volume 516, 2024
10th Conference on Emerging Energy and Process Technology (CONCEPT 2023)
Article Number 01010
Number of page(s) 5
Section Energy Sustainability
DOI https://doi.org/10.1051/e3sconf/202451601010
Published online 15 April 2024
  1. D. Papurello, S. Silvestri, S. Modena, Biogas trace compounds impact on high-temperature fuel cells short stack performance. Int. J. Hydrogen Energy 46(12), 8792–8801 (2021) [CrossRef] [Google Scholar]
  2. K.H. Tan, H.A. Rahman, H. Taib, Coating layer and influence of transition metal for ferritic stainless steel interconnector solid oxide fuel cell: A review. Int. J. Hydrogen Energy 44(58), 30591–30605 (2019) [CrossRef] [Google Scholar]
  3. A. Dhanasekaran, Y. Subramanian, L.A. Omeiza, V. Raj, H.P.H.M. Yassin, M.A. Sa, A.K. Azad, Computational fluid dynamics for protonic ceramic fuel cell stack modeling: a brief review. Energies. 16(1), 208 (2022) [CrossRef] [Google Scholar]
  4. Ö. Aydın, G. Matsumoto, A. Kubota, D.L. Tran, M. Sakamoto, Y. Shiratori, Performance and durability of one-cell module of biogas-utilizing SOFC equipped with graded indirect internal reformer. J. Electrochem. Soc. 167(6), 064512 (2020) [CrossRef] [Google Scholar]
  5. A. Iqbal, G. Moskal, Recent development in advance ceramic materials and understanding the mechanisms of thermal barrier coatings degradation. Arch. Comput. Methods Eng. 30, 4855 (2023) [CrossRef] [Google Scholar]
  6. M.E. Chelmehsara, J. Mahmoudimehr, Techno-economic comparison of anode-supported, cathode-supported, and electrolyte-supported SOFCs. Int. J. Hydrogen Energy 43(32), 15521–15530 (2018) [CrossRef] [Google Scholar]
  7. M. Asmare, M. Ilbas, F.M. Cimen, C. Timurkutluk, S. Onbilgin, Three-dimensional numerical simulation and experimental validation on ammonia and hydrogen fueled micro tubular solid oxide fuel cell performance. Int. J. Hydrogen Energy 47(35), 15865–15874 (2022) [CrossRef] [Google Scholar]
  8. D. Panuh, S.M. Ali, D. Yulianto, M.F. Shukur, A. Muchtar, Effect of yttrium-stabilized bismuth bilayer electrolyte thickness on the electrochemical performance of anode-supported solid oxide fuel cells. Ceram. Int. 47(5), 6310–6317 (2021) [CrossRef] [Google Scholar]
  9. H. Shimada, T. Yamaguchi, H. Sumi, Y. Yamaguchi, K. Nomura, Y. Fujishiro, Effect of Ni diffusion into BaZr0.1Ce0.7Y0.1Yb0.1O3− δ electrolyte during high temperature co-sintering in anode-supported solid oxide fuel cells. Ceram. Int. 44(3), 3134–3140 (2018). [CrossRef] [Google Scholar]
  10. S. Yang, T. Chen, Y. Wang, Z. Peng, W.G. Wang, Electrochemical analysis of an anode-supported SOFC. Int. J. Electrochem. Sci. 8(2), 2330–2344 (2013) [CrossRef] [Google Scholar]
  11. A.M. Nassef, A. Fathy, E.T. Sayed, M.A. Abdelkareem, H. Rezk, W.H. Tanveer, A.G. Olabi, Maximizing SOFC performance through optimal parameters identification by modern optimization algorithms. Renew. Energy 138, 458–464 (2019) [CrossRef] [Google Scholar]
  12. N.A.M.N. Aman, A. Muchtar, M.I. Rosli, N.A. Baharuddin, M.R. Somalu, N.S. Kalib, Influence of thermal conductivity on the thermal behavior of intermediate-temperature solid oxide fuel cells. J. Electrochem. Sci. Technol. 11(2), 132–139 (2020) [CrossRef] [Google Scholar]
  13. K. Yuan, Y. Ji, J.N. Chung, Physics-based modeling of a low-temperature solid oxide fuel cell with consideration of microstructure and interfacial effects. J. Power Sources 194(2), 908–919 (2009) [CrossRef] [Google Scholar]
  14. R.V. Mangalaraja, S. Ananthakumar, M. Paulraj, H. Pesenti, M. López, C.P. Camurri, L.A. Barcos, R.E. Avila, Electrical and thermal characterization of Sm3+ doped ceria electrolytes synthesized by combustion technique. J. Alloys Compd. 510(1), 134–140 (2012) [CrossRef] [Google Scholar]
  15. A.M. Abdalla, S. Hossain, A.T. Azad, P.M.I. Petra, F. Begum, S.G. Eriksson, A.K. Azad, Nanomaterials for solid oxide fuel cells: A review. Renew. Sustain. Energy Rev. 82, 353–368 (2018) [CrossRef] [Google Scholar]
  16. X. Zhang, M. Espinoza, T. Li, M. Andersson, Parametric study for electrode microstructure influence on SOFC performance. Int. J. Hydrogen Energy 46(75), 37440–37459 (2021) [CrossRef] [Google Scholar]
  17. S. Su, X. Gao, Q. Zhang, W. Kong, D. Chen, Anode-versus cathode-supported solid oxide fuel cell: Effect of cell design on the stack performance. Int. J. Electrochem. Sci. 10(3), 2487–2503 (2015) [CrossRef] [Google Scholar]
  18. M. Asmare, M. Ilbas, F.M. Cimen, C. Timurkutluk, S. Onbilgin, Three-dimensional numerical simulation and experimental validation on ammonia and hydrogen fueled micro tubular solid oxide fuel cell performance. Int. J. Hydrogen Energy 47(35), 15865–15874 (2022) [CrossRef] [Google Scholar]
  19. R.V. Kumar, A.P. Khandale, A review on recent progress and selection of cobalt-based cathode materials for low temperature-solid oxide fuel cells. Renew. Sustain. Energy Rev. 156, 111985 (2022) [CrossRef] [Google Scholar]
  20. S.W. Perng, C.R. Chen, Numerical investigation of anode thickness on the performance and heat/mass transport phenomenon for an anode-supported SOFC button cell. J. Nanomater. 16(1), 197–197 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.