EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 517 (2024) E3S Web of Conf., 517 (2024) 06003 References
Open Access
Issue
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
Article Number 06003
Number of page(s) 10
Section Green Supply Chain Management
DOI https://doi.org/10.1051/e3sconf/202451706003
Published online 15 April 2024
  1. A. Setiawan, F. Pulansari, and Sumiati, “Pengukuran Kinerja dengan Metode Supply Chain Operations Reference (SCOR) (Studi Kasus PT. XYZ),” J. Manaj. Ind. dan Teknol., vol. I, no. 1, pp. 55–66, 2020. [Google Scholar]
  2. N. Yusrianafi and S. Dahda, “Pengukuran Kinerja Pada UKM Kerudung Menggunakan Metode Supply Chain Operator Reference (SCOR) Dan AHP,” J. Optim., vol. 7, no. 1, p. 109, 2021. [Google Scholar]
  3. M. Djunaidi, M. A. A. Sholeh, and N. M. Mufiid, “Identifikasi faktor Penerapan Green Supply Chain Management Pada Industri Furniture Kayu,” J. Tek. Ind., vol. 19, no. 1, pp. 1–10, 2018. [Google Scholar]
  4. H. Purnomo, A. Kisanjani, W. I. Kurnia, and S. Suwarto, “Pengukuran Kinerja Green Supply Chain Management Pada Industri Penyamakan Kulit Yogyakarta,” J. Ilm. Tek. Ind., vol. 18, no. 2, pp. 161– 169, 2019. [Google Scholar]
  5. H. Munawir, A. Ciptaningtyas, M. Djunaidi, and E. Setiawan, “Analisis Nilai Tambah Produk Olahan Ketela Ungu dan Rantai Pasok Ketela Ungu,” J. Ilm. Tek. Ind., vol. 17, no. 2, p. 151, 2018. [Google Scholar]
  6. R. Primadasa and A. Sokhibi, “Model Green Scor Untuk Pengukuran Kinerja Green Supply Chain Management (Gscm) Industri Kelapa Sawit Di Indonesia,” Quantum Tek. J. Tek. Mesin Terap., vol. 1, no. 2, pp. 55–62, 2020. [Google Scholar]
  7. H. N. Izzati, I. Baihaqi, and S. Ardiantono, “70324156099-1-Pb,” vol. 10, no. 2, 2021. [Google Scholar]
  8. Y. Septiani, E. Arribe, and R. Diansyah, “(Studi Kasus: Mahasiswa Universitas Abdurrab Pekanbaru),” J. Teknol. dan Open Source, vol. 3, no. 3, pp. 131– 143, 2020. [Google Scholar]
  9. M. Rosyidah, A. R. Putri, and I. I. Ntroduction, “Green Supply Chain Management Performance Measurement in Palembang Rubber Industry,” J. Ilm. Tek. Ind., vol. 6869, 2019. [Google Scholar]
  10. D. C. W. Wibowo, “Perancangan Alat Ukur Kinerja Rantai Pasok Produk Masker Dengan Pendekatan Green Scor,” Ind. Eng. Online J., 2022. [Google Scholar]
  11. E. Kusrini, Q. Qurtubi, and N. H. Fathoni, “Design Performance Measurement Model for Retail Services Using Halal Supply Chain Operation Reference (SCOR): A Case Study in a Retail in Indonesia,” J. Adv. Manag. Sci., vol. 6, no. 4, pp. 218–221, 2018. [CrossRef] [Google Scholar]
  12. A. Hasibuan et al., “Performance analysis of Supply Chain Management with Supply Chain Operation reference model,” J. Phys. Conf. Ser., vol. 1007, no. 1, 2018. [Google Scholar]
  13. C. Santoso, W. Kosasih, and M. A. Saryatmo, “Pengukuran Kinerja Manajemen Rantai Pasok Pada Pt. Xyz Dengan Pendekatan Metode Supply Chain Operations Reference (Scor),” J. Mitra Tek. Ind., vol. 1, no. 1, pp. 35–46, 2022. [Google Scholar]
  14. R. C. Santos and J. L. Martinho, “An Industry 4.0 maturity model proposal,” J. Manuf. Technol. Manag., vol. 31, no. 5, pp. 1023–1043, 2020. [Google Scholar]
  15. I. P. A. A. P. Putra, I. M. Sukarsa, and I. P. A. Bayupati, “Audit Ti Kinerja Manajemen Pt. X Dengan Frame Work Cobit 4.1,” Lontar Komput. J. Ilm. Teknol. Inf., vol. 6, no. 1, pp. 13–24, 2015. [Google Scholar]
  16. E. W. Abryandoko and Y. Widhiastuti, “Identifikasi Maturity Levels Supply Chain Pada Perusahaan Konstruksi,” Teknika, vol. 15, no. 2, p. 50, 2020. [CrossRef] [Google Scholar]
  17. R. R. Chotimah, B. Purwanggono, and A. Susanty, “Measurement of Supply Chain Performance Using the SCOR and AHP Methods at the Urea Fertilizer Packing Unit of PT . Dwimatama Multikarsa Semarang,” Ejournal Undip, vol. 1, no. 1, 2018. [Google Scholar]
  18. S. Yuliati et al., “Penyuluhan Penanganan Limbah Hasil Pembuatan Tahu Di Padang Selasa Bukit Lama, Palembang,” pp. 42–47, 2017. [Google Scholar]
  19. Z. F. Emzain, N. Qosim, A. H. Firdaus, L. Agustriyana, and M. A. Rizza, “Peningkatan Kualitas Kemasan Produk menggunakan Mesin Pres Segel Plastik Otomatis di Komunitas UMKM Shingkara Kecamatan Singosari Kabupaten Malang,” Prima Abdika J. Pengabdi. Masy., vol. 2, no. 4, pp. 343–351, 2022. [Google Scholar]
  20. F. F. Febrianti et al., “164-500-1-Pb,” vol. 3, no. 3, pp. 39–43, 2018. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.