Open Access
| Issue |
E3S Web Conf.
Volume 519, 2024
5th Talenta Conference on Engineering, Science and Technology (TALENTA CEST-5 2024)
|
|
|---|---|---|
| Article Number | 04002 | |
| Number of page(s) | 5 | |
| Section | Green Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202451904002 | |
| Published online | 01 May 2024 | |
- Faqih, I., Prabowo, A.R., Adiputra, R., Muhayat, N., Braun, M., Ehlers, S., Application of the limit design state to hull-girder ultimate strength evaluations on the ship-shaped structures, in Procedia Structural Integrity, 47, 812–819 (2023) [CrossRef] [Google Scholar]
- Faqih, I., Adiputra, R., Prabowo, A.R., Muhayat, N., Ehlers, S., Braun, M., Hull girder ultimate strength of bulk carrier (HGUS-BC) evaluation: Structural performances subjected to true inclination conditions of stiffened panel members, Results in Engineering, 18, 101076 (2023) [CrossRef] [Google Scholar]
- Hanif, M.I., Adiputra, R., Prabowo, A.R., Muhayat, N., Erwandi, E., Huda, N., Effects of the geometrical imperfections on the ultimate strength performances: A case study on the designed-steel stiffened panel, in Procedia Structural Integrity, 47, 125–132 (2023) [CrossRef] [Google Scholar]
- Prabowo, A.R., Tuswan, T., Nurcholis, A., Pratama, A.A., On The Resistance to Buckling Loads of Idealized Hull Structures: FE Analysis on Designed-Stiffened Plates, Mathematical Problems in Engineering, 6229498 (2021) [Google Scholar]
- Prabowo, A.R., Ridwan, R., Muttaqie, T., On The Resistance to Buckling Loads of Idealized Hull Structures: FE Analysis on Designed-Stiffened Plates, in Designs, 6 (3), 46 (2022) [CrossRef] [Google Scholar]
- Xu, M.C., Song, Z.J., Wang, T., Zhang, W.Z. Pan, J., Empirical formulae assessment of ultimate strength for perforated stiffened panels under longitudinal compression, in Ocean Engineering, 264, 112445 (2022) [CrossRef] [Google Scholar]
- Yang, B., Li, Y., Fu, K., In-plane impact-induced elastic buckling behaviour of rectangular transversally isotropic stiffened plates with all edges elastically restrained against rotation, in International Journal of Mechanical Sciences, 174, 105478 (2022) [Google Scholar]
- Petry, D., Fahlbusch, G., Dynamic buckling of thin isotropic plates subjected to inplane impact, in Thin-Walled Structures, 38(3), 267–283 (2000) [CrossRef] [Google Scholar]
- Shi, G.J., Wang, D.Y., Hu, B., Cai, S.J., Effect of initial geometric imperfections on dynamic ultimate strength of stiffened plate under axial compression for ship structures, in Ocean Engineering, 256, 111448 (2022) [CrossRef] [Google Scholar]
- Paik, J.K., Thayamballi, A.K., An experimental investigation on the dynamic ultimate compressive strength of ship plating, in International Journal of Impact Engineering, 28(7), 803–811(2003) [CrossRef] [Google Scholar]
- Xu, M.C., Song, Z.J., Pan, J., Soares, C.G., Ultimate strength assessment of continuous stiffened panels under combined longitudinal compressive load and lateral pressure, in Ocean Engineering, 139, 39–53 (2017) [CrossRef] [Google Scholar]
- Xu, M.C., Song, Z.J., Pan, J., Study on influence of nonlinear finite element method models on ultimate bending moment for hull girder, in ThinWalled Structures, 119, 282–295 (2017) [Google Scholar]
- Xu, M.C., Yanagihara, D., Fujikubo, M., Soares, C.G., Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads, in Marine Structures, 34, 205–225 (2013) [CrossRef] [Google Scholar]
- Anyfantis, K., Ultimate compressive strength of eccentrically loaded stiffened panels in ship structures: a computational study, in Proceedings of the 38th International Conference on Ocean, Offshore & Arctic Engineering, OMAE2019-96708, V003T02A101 (2019) [Google Scholar]
- Paulo, R.M.F., Teixeira-Dias, F., Valente, R.A.F., Numerical simulation of aluminium stiffened panels subjected to axial compression: sensitivity analyses to initial geometrical imperfections and material properties, in Thin-Walled Structures, 62, 65–74 (2013) [CrossRef] [Google Scholar]
- Soares, C.G., Kmiecik, M., Simulation of the ultimate compressive strength of unstiffened rectangular plates, in Marine Structures, 6(5–6), 553–569 (1993) [CrossRef] [Google Scholar]
- Soares, C.G., Design equation for the compressive strength of unstiffened plate elements with initial imperfections, in Journal of Constructional Steel Research, 9(4), 287–310 (1988) [CrossRef] [Google Scholar]
- Fujikubo, M., Harada, M., Yao, T., Khedmati, M.R., Yanagihara, D., Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure Part 2: continuous stiffened panel, in Marine Structures, 18(5), 411–427 (2005) [CrossRef] [Google Scholar]
- Lutfi, Y.M., Adiputra, R., Prabowo, A.R., Utsunomiya, T., Erwandi, E., Muhayat, N., Assessment of the stiffened panel performance in the OTEC seawater tank design: Parametric study and sensitivity analysis, in Theoretical and Applied Mechanics Letters, 13(4), 100452 (2023) [CrossRef] [Google Scholar]
- Lutfi, Y.M., Adiputra, R., Prabowo, A.R., Muhayat, N., Carvalho, H., Ferradosa, T.F., Ultimate strength value of stiffened panel designs under initial displacement and applied pressure: FE analysis vs. IACS-CSR, in Procedia Structural Integrity, 47, 660–667 (2023) [CrossRef] [Google Scholar]
- Ohtsubo, H. and Sumi, Y., Proceedings of the 14th International Ship and Offshore Structures Congress, in Elsevier Science, Oxford, United Kingdom (2000) [Google Scholar]
- Adiputra, R., Yoshikawa, T., Erwandi, E., Reliability-Based Assessment of Ship Hull Girder Ultimate strength, in Curved and Layered Structures, 10(1), 20220189 (2023) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.