Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01001
Number of page(s) 8
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901001
Published online 29 May 2024
  1. Arunkumar, K., Muthukannan, M., Kumar, A. S., Ganesh, A. C., & Devi, R. K. (2021). Production of Eco-Friendly Geopolymer Concrete by using Waste Wood Ash for a Sustainable Environment. Pollution, 7(4), 993–1006. https://doi.org/10.22059/POLL.2021.320857.1039 [Google Scholar]
  2. Arunvivek, G. K., & Rameshkumar, D. (2019). Experimental Investigation on Performance of Waste Cement Sludge and Silica Fume-Incorporated Portland Cement Concrete. Journal of The Institution of Engineers (India): Series A, 100(4), 611–618. https://doi.org/10.1007/s40030-019-00399-3 [CrossRef] [Google Scholar]
  3. Sankar, B., & Ramadoss, P. (2023). Assessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete. International Review of Applied Sciences and Engineering. https://doi.org/10.1556/1848.2023.00638 [Google Scholar]
  4. L.J Ouyang, M.X Chai., J. Song., L.L Hu. and W.Y Gao, Repair of thermally damaged concrete cylinders with basalt fiber-reinforced polymer jackets. Journal of Building Engineering, 44, pg.102673 (2021). [CrossRef] [Google Scholar]
  5. M. Arduini., A. Nanni, Behavior of Precracked RC beams strengthened with carbon FRP Sheets. ASCE Journal of Composites for Construction 1 (2), pg. 63–70 (1997) [CrossRef] [Google Scholar]
  6. M. Arduini., A.D. Tommaso., A. Nanni, Brittle failure in FRP plate and sheet bonded beams. ACI Structural Journal 94 (4), pg. 363–371 (1997) [Google Scholar]
  7. J. Shayanfar., J.A Barros, and M. Rezazadeh, Analytical model to predict axial stress-strain behavior of heat-damaged unreinforced concrete columns wrapped by FRP jacket. Engineering Structures, 289, pg.116244 (2023). [CrossRef] [Google Scholar]
  8. J. Maheswaran., M. Chellapandian, and N. Arunachelam, Retrofitting of severely damaged reinforced concrete members using fiber reinforced polymers: A comprehensive review. In Structures Vol. 38, pg. 1257–1276 (2022). [CrossRef] [Google Scholar]
  9. P.O Awoyera., A. Akin-Adeniyi., F. Althoey., M.A Abuhussain., K. Jolayemi and L.M.B Romero, Green Structural Retrofitting Materials for Fire-Damaged Reinforced Concrete Buildings: Advances in Sustainable Repair of Distressed Buildings. Fire Technology, pg.1–37 (2024). [Google Scholar]
  10. Y. Miyauchi., Y. Higashibata, and K. Fukuyama, Studies on Repair and Strengthening Methods of Damaged Reinforced Concrete Columns. Cement & Concrete Composites, 22, pg.81–88 (2000). [Google Scholar]
  11. D. Kachlakev and D.D McCurry, Behavior of full-scale reinforced concrete beams retrofitted for shear and flexural with FRP laminates. Composites Part B: Engineering, 31(6–7), pg.445–452 (2000). [CrossRef] [Google Scholar]
  12. Y.T Obaidat., S. Heyden., O. Dahlblom., G. Abu-Farsakh and Y. Abdel-Jawad, Retrofitting of reinforced concrete beams using composite laminates. Construction and Building Materials, 25(2), pg.591–597 (2011). [CrossRef] [Google Scholar]
  13. D. Baggio, K. Soudki, M. Noël, Strengthening of shear critical RC beams with various FRP systems, Constr. Build. Mater. (2014). [Google Scholar]
  14. J.F. Chen, J.G. Teng - Shear capacity of FRP-strengthened RC beams: FRP debonding, Constr. Build. Mater. (2003). [Google Scholar]
  15. IS 10262–2009 - Indian Standard Guidelines for concrete mix design proportioning, Bureau of Indian Standards, New Delhi, India, (2009). [Google Scholar]
  16. IS 1199–1959, (Reaffirmed 1999) - Indian Standard Methods of Sampling and Analysis of Concrete, Bureau of Indian Standards, New Delhi, India. [Google Scholar]
  17. IS 516–1959, (Reaffirmed 1999) - Indian Standard Methods of Tests for Strength of Concrete, Bureau of Indian Standards, New Delhi, India [Google Scholar]
  18. IS 5816–1999 - Indian Standard Splitting Tensile Strength of Concrete- Method of Test, Bureau of Indian Standards, New Delhi, India. [Google Scholar]
  19. R. Kamgar, M.H. Bagherinejad, H. Heidarzadeh,, A new formulation for prediction of the shear capacity of FRP in strengthened reinforced concrete beams, Soft Compute. (2019). [Google Scholar]
  20. A. Siddiqui, Nadeem., Saleh H. Alsayed, Yousef A. Al- Salloum, Rizwan A. Iqbal, and Husain Abbas, Experimental investigation of slender circular RC columns strengthened with FRP composites, Construction and Building at Materials, (2014). [Google Scholar]
  21. Z. Lu, G. Xian, H. Li, Effects of elevated temperatures on the mechanical properties of basalt fibers and BFRP plates, Constr. Build. Mater. (2016). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.