EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 529 (2024) E3S Web of Conf., 529 (2024) 01014 References
Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01014
Number of page(s) 11
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901014
Published online 29 May 2024
  1. Afrin, Habiba. “A review on different types soil stabilization techniques.” International Journal of Transportation Engineering and Technology 3.2 (2017): 19–24. [CrossRef] [Google Scholar]
  2. Abdila, Syafiadi Rizki, et al. “Evaluation on the mechanical properties of ground granulated blast slag (GGBS) and fly ash stabilized soil via geopolymer process.” Materials 14.11 (2021): 2833. [CrossRef] [PubMed] [Google Scholar]
  3. Sharma, Anil Kumar, and P. V. Sivapullaiah. “Ground granulated blast furnace slag amended fly ash as an expansive soil stabilizer.” Soils and Foundations 56.2 (2016): 205–212. [CrossRef] [Google Scholar]
  4. Mohanty, Samaptika, et al. “Strength and durability of flyash, GGBS and cement clinker stabilized dispersive soil.” Cold Regions Science and Technology 191 (2021): 103358. [CrossRef] [Google Scholar]
  5. Neeladharan, C., et al. “Stabilization of soil using Fly ash with ground granulated blast furnace slag (GGBS) as binder.” Suraj Punj. J 9 (2019): 23. [Google Scholar]
  6. V.V. Venu Madhav, Ch. Sri Chaitanya, Phani Prasanthi. P, A.V.S.S.K.S. Gupta, V.V. Spandana, Kuldeep Kumar Saxena, Anita Gehlot & Rajan Verma. “Effect of angle-ply arrangement on fracture behaviour of FRP composite laminate under the thermal loading conditions subjected to central elliptical cut-out”, Advances in Materials and Processing Technologies, (2023) DOI: 10.1080/2374068X.2022.2162756 [Google Scholar]
  7. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [CrossRef] [Google Scholar]
  8. Yadav, Puja, Kuldeep K. Saxena, Shankar Sehgal, Tarunpreet Singh, and Shashi Bahl. “Hot deformation behaviour of Ti alloys: A review on physical simulation and deformation mechanisms.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237, 2 (2023): 546–570. [CrossRef] [Google Scholar]
  9. Samantasinghar, Subhashree, and Suresh Prasad Singh. “Strength and durability of granular soil stabilized with FA-GGBS geopolymer.” Journal of Materials in Civil Engineering 33.6 (2021): 06021003. [CrossRef] [Google Scholar]
  10. Yadu, Laxmikant, and R. K. Tripathi. “Stabilization of soft soil with granulated blast furnace slag and fly ash.” International Journal of Research in Engineering and Technology 2.2 (2013): 115–119. [CrossRef] [Google Scholar]
  11. Buddi, Tanya, Susmitha Valli Gogula, and Kuldeep K. Saxena. “Manufacturing and Evaluation of Mechanical Properties for Rice Husk ParticleBoard Using IoT.” Indian Journal of Engineering and Materials Sciences (IJEMS) 29, 6 (2023): 750–754. [Google Scholar]
  12. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114–117). IEEE. [Google Scholar]
  13. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., … & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279–288. [CrossRef] [Google Scholar]
  14. Abdila, Syafiadi Rizki, et al. “Potential of soil stabilization using ground granulated blast furnace slag (GGBFS) and fly ash via geopolymerization method: A Review.” Materials 15.1 (2022): 375. [CrossRef] [PubMed] [Google Scholar]
  15. Budarapu, Pattabhi R., Sudhir Sastry Yb, Brahmanandam Javvaji, and D. Roy Mahapatra”Vibration analysis of multi-walled carbon nanotubes embedded in elastic medium.” Frontiers of Structural and Civil Engineering 8 (2014): 151–159. [Google Scholar]
  16. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA–MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  17. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356–364. [CrossRef] [Google Scholar]
  18. Awasthi, Ankita, U. Sathish Rao, Kuldeep K. Saxena, and Ravi K. Dwivedi. “Impact of equal channel angular pressing on aluminium alloys: An overview.” Materials Today: Proceedings 57 (2022): 908–912. [Google Scholar]
  19. Vijayakumar, Y., P. Nagaraju, Veeraswamy Yaragani, Saidi Reddy Parne, Nasser S. Awwad, and MV Ramana Reddy. “Nanostructured Al and Fe co-doped ZnO thin films for enhanced ammonia detection.” Physica B: Condensed Matter 581 (2020): 411976. [CrossRef] [Google Scholar]
  20. Reddy, P. Venkateshwar, B. Veerabhadra Reddy, and P. Srinivasa Rao. “A numerical study on tube hydroforming process to optimize the process parameters by Taguchi method.” Materials Today: Proceedings 5, no. 11 (2018): 25376–25381. [CrossRef] [Google Scholar]
  21. Padmaja, B., VV Rama Prasad, and K. V. N. Sunitha. “A machine learning approach for stress detection using a wireless physical activity tracker.” International Journal of Machine Learning and Computing 8, no. 1 (2018): 33–38. [CrossRef] [Google Scholar]
  22. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., … & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [CrossRef] [PubMed] [Google Scholar]
  23. Nagendra, J., G. P. K. Yadav, R. Srinivas, N. Gupta, D. Bandhu, A. Fande, K. K. Saxena et al. “Sustainable shape formation of multifunctional carbon fiber-reinforced polymer composites: A study on recent advancements.” Mech. Adv. Mater. Struct 30 (2023): 1–35. [CrossRef] [Google Scholar]
  24. Alkorbi, A. S., Kumar, K. Y., Prashanth, M. K., Parashuram, L., Abate, A., Alharti, F. A., … & Raghu, M. S. (2022). Samarium vanadate affixed sulfur self doped g-C3N4 heterojunction; photocatalytic, photoelectrocatalytic hydrogen evolution and dye degradation. International Journal of Hydrogen Energy, 47(26), 12988–13003. [CrossRef] [Google Scholar]
  25. Indira, D. N. V. S. L. S., Rajendra Kumar Ganiya, P. Ashok Babu, A. Xavier, L. Kavisankar, S. Hemalatha, V. Senthilkumar et al. “Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis.” BioMed Research International 2022 (2022). [Google Scholar]
  26. Ramprasad, Pikkili, Ch Basavapoornima, Shobha Rani Depuru, and C. K. Jayasankar. “Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications.” Optical Materials 129 (2022): 112482. [CrossRef] [Google Scholar]
  27. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022, August). Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  28. Samantasinghar, S., & Singh, S. P. (2021). Strength and durability of granular soil stabilized with FA-GGBS geopolymer. Journal of Materials in Civil Engineering, 33(6), 06021003. [CrossRef] [Google Scholar]
  29. Arunkumar, K., Muthukannan, M., Suresh kumar, A., & Chithambar Ganesh, A. (2021). Mitigation of waste rubber tire and waste wood ash by the production of rubberized low calcium waste wood ash based geopolymer concrete and influence of waste rubber fibre in setting properties and mechanical behavior. Environmental Research, 194(December 2020), 110661. https://doi.org/10.1016/j.envres.2020.110661 [CrossRef] [PubMed] [Google Scholar]
  30. Prithiviraj, C., Swaminathan, P., Kumar, D. R., Murali, G., & Vatin, N. I. (2022). Fresh and Hardened Properties of Self-Compacting Concrete Comprising a Copper Slag. Buildings, 12(7). https://doi.org/10.3390/buildings12070965 [CrossRef] [Google Scholar]
  31. Sankar, B., & Ramadoss, P. (2023). Assessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete. International Review of Applied Sciences and Engineering. https://doi.org/10.1556/1848.2023.00638 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.