EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 529 (2024) E3S Web of Conf., 529 (2024) 01032 References
Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01032
Number of page(s) 9
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901032
Published online 29 May 2024
  1. B. Sankar and P. Ramadoss, “Review on fiber hybridization in ternary blended high-performance concrete,” Mater. Today Proc., vol. 45, pp. 4919–4924, 2021, doi: 10.1016/j.matpr.2021.01.366. [CrossRef] [Google Scholar]
  2. G. K. Arunvivek and D. Rameshkumar, “Experimental Investigation on Performance of Waste Cement Sludge and Silica Fume-Incorporated Portland Cement Concrete,” J. Inst. Eng. Ser. A, vol. 100, no. 4, pp. 611–618, 2019, doi: 10.1007/s40030-019-00399-3. [CrossRef] [Google Scholar]
  3. B. Sankar and P. Ramadoss, “Results in Control and Optimization Modelling the compressive strength of high-performance concrete containing metakaolin using distinctive statistical techniques,” Results Control Optim., vol. 12, no. December 2022, p. 100241, 2023, doi: 10.1016/j.rico.2023.100241. [Google Scholar]
  4. P. Rama Rao and G. Ramakrishna, “Oil palm empty fruit bunch fiber: surface morphology, treatment, and suitability as reinforcement in cement composites- A state of the art review,” Clean. Mater., vol. 6, no. July, p. 100144, 2022, doi: 10.1016/j.clema.2022.100144. [Google Scholar]
  5. G. K. Arunvivek and D. Rameshkumar, “Experimental Investigation on Feasibility of utilizing Phosphogypsum in E-Glass Fiber-incorporated Non-fired Ceramic Wall Tile,” J. Inst. Eng. Ser. A, vol. 103, no. 2, pp. 445–451, 2022, doi: 10.1007/s40030-021-00604-2. [Google Scholar]
  6. B. Sankar and P. Ramadoss, “Assessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete,” Int. Rev. Appl. Sci. Eng., vol. 15, no. 1, pp. 44–54, 2024, doi: 10.1556/1848.2023.00638. [Google Scholar]
  7. C. Prithiviraj, P. Swaminathan, D. R. Kumar, G. Murali, and N. I. Vatin, “Fresh and Hardened Properties of Self-Compacting Concrete Comprising a Copper Slag,” Buildings, vol. 12, no. 7, 2022, doi: 10.3390/buildings12070965. [Google Scholar]
  8. P. Rama Rao and G. Ramakrishna, “Experimental Investigation on Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber Reinforced Cement Mortar,” Mater. Today Proc., vol. 46, no. July, pp. 471–477, 2021, doi: 10.1016/j.matpr.2020.10.269. [CrossRef] [Google Scholar]
  9. N. Nakararoj, et al., “Effects of High-Volume bottom ash on Strength, Shrinkage, and creep of High-Strength recycled concrete aggregate,” Constr. Build. Mater., vol. 356, no. May, p. 129233, 2022, doi: 10.1016/j.conbuildmat.2022.129233. [Google Scholar]
  10. V. Rheinheimer, et al., “Multi-scale study of high-strength low-thermal-conductivity cement composites containing cenospheres,” Cem. Concr. Compos., vol. 80, pp. 91–103, 2017, doi: 10.1016/j.cemconcomp.2017.03.002. [CrossRef] [Google Scholar]
  11. S. S. Chanda, S. K. Patel, A. N. Nayak, and C. R. Mohanty, “Performance evaluation on bond, durability, micro-structure, cost effectiveness and environmental impacts of fly ash cenosphere based structural lightweight concrete,” Constr. Build. Mater., vol. 397, no. July, p. 132429, 2023, doi: 10.1016/j.conbuildmat.2023.132429. [Google Scholar]
  12. S. Cheng, Z. Shui, Q. Li, T. Sun, and R. Yang, “Properties, microstructure and hydration products of lightweight aggregate concrete with metakaolin and slag addition,” Constr. Build. Mater., vol. 127, pp. 59–67, 2016, doi: 10.1016/j.conbuildmat.2016.09.135. [CrossRef] [Google Scholar]
  13. B. Sankar and P. Ramadoss, “Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete,” Int. J. Eng. Trans. B Appl., vol. 35, no. 8, pp. 1629–1640, 2022, doi: 10.5829/IJE.2022.35.08B.19. [Google Scholar]
  14. A. Al-Sibahy and R. Edwards, “Mechanical and thermal properties of novel lightweight concrete mixtures containing recycled glass and metakaolin,” Constr. Build. Mater., vol. 31, pp. 157–167, 2012, doi: 10.1016/j.conbuildmat.2011.12.095. [CrossRef] [Google Scholar]
  15. O. Keleştemur and B. Demirel, “Effect of metakaolin on the corrosion resistance of structural lightweight concrete,” Constr. Build. Mater., vol. 81, pp. 172–178, 2015, doi: 10.1016/j.conbuildmat.2015.02.049. [CrossRef] [Google Scholar]
  16. N. Balgourinejad, M. Haghighifar, R. Madandoust, and S. Charkhtab, “Experimental study on mechanical properties, microstructural of lightweight concrete incorporating polypropylene fibers and metakaolin at high temperatures,” J. Mater. Res. Technol., vol. 18, pp. 5238–5256, 2022, doi: 10.1016/j.jmrt.2022.04.005. [CrossRef] [Google Scholar]
  17. A. Danish, M. A. Mosaberpanah, R. Tuladhar, M. U. Salim, M. A. Yaqub, and N. Ahmad, “Effect of cenospheres on the engineering properties of lightweight cementitious composites: A comprehensive review,” J. Build. Eng., vol. 49, no. December 2021, p. 104016, 2022, doi: 10.1016/j.jobe.2022.104016.J. Lu, et al., “Utilization of municipal solid waste incinerator bottom ash (MSWIBA) in concrete as partial replacement of fine aggregate,” Constr. Build. Mater., vol. 414, no. October 2023, p. 134918, 2024, doi: 10.1016/j.conbuildmat.2024.134918. [Google Scholar]
  18. H. K. Kim, E. A. Hwang, and H. K. Lee, “Impacts of metakaolin on lightweight concrete by type of fine aggregate,” Constr. Build. Mater., vol. 36, pp. 719–726, 2012, doi: 10.1016/j.conbuildmat.2012.06.020. [CrossRef] [Google Scholar]
  19. Z. Najeeb and M. A. Mosaberpanah, “Mechanical and durability properties of modified High-Performance mortar by using cenospheres and Nano-Silica,” Constr. Build. Mater., vol. 362, no. November 2022, 2023, doi: 10.1016/j.conbuildmat.2022.129782. [Google Scholar]
  20. J. Strzałkowski, A. Stolarska, D. Kożuch, and J. Dmitruk, “Hygrothermal and strength properties of cement mortars containing cenospheres,” Cem. Concr. Res., vol. 174, no. September, 2023, doi: 10.1016/j.cemconres.2023.107325. [Google Scholar]
  21. A. Haddadian, et al., “Valorization of Diverse Sizes of Coal Bottom Ash As Fine Aggregate in the Performance of Lightweight Foamed Concrete,” J. Civ. Eng. Manag., vol. 28, no. 8, pp. 601–619, 2022, doi: 10.3846/jcem.2022.16995. [CrossRef] [Google Scholar]
  22. S. Beddu, et al., “Utilization of fly ash cenosphere to study mechanical and thermal properties of lightweight concrete,” AIMS Mater. Sci., vol. 7, no. 6, pp. 911–925, 2020, doi: 10.3934/MATERSCI.2020.6.911. [CrossRef] [Google Scholar]
  23. R. K. Majhi, A. Padhy, and A. N. Nayak, “Performance of structural lightweight concrete produced by utilizing high volume of fly ash cenosphere and sintered fly ash aggregate with silica fume,” Clean. Eng. Technol., vol. 3, p. 100121, 2021, doi: 10.1016/j.clet.2021.100121. [Google Scholar]
  24. J. Yang, J. Mahato, and J. Moon, “Effects of various sizes of cenospheres on microstructural, mechanical, and thermal properties of high-strength and lightweight cementitious composites,” J. Build. Eng., vol. 76, no. July, p. 107214, 2023, doi: 10.1016/j.jobe.2023.107214. [Google Scholar]
  25. T. Kim, “Characteristics of alkali-activated slag cement-based ultra-lightweight concrete with high-volume cenosphere,” vol. 302, no. July, 2021. [Google Scholar]
  26. F. Liu, J. Wang, X. Qian, and J. Hollingsworth, “Internal curing of high performance concrete using cenospheres,” Cem. Concr. Res., vol. 95, pp. 39–46, 2017, doi: 10.1016/j.cemconres.2017.02.023. M. Logesh Kumar and V. Revathi, “Metakaolin bottom ash blend geopolymer mortar - A feasibility study,” Constr. Build. Mater., vol. 114, pp. 1–5, 2016, doi: 10.1016/j.conbuildmat.2016.03.149. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.