EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 529 (2024) E3S Web of Conf., 529 (2024) 01043 References
Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01043
Number of page(s) 12
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901043
Published online 29 May 2024
  1. K. Arunkumar, M. Muthukannan, A. Suresh Kumar, A. C. Ganesh, and R. K. Devi, in Lect. Notes Civ. Eng. (2023), pp. 693–707 [Google Scholar]
  2. K. Arunkumar, M. Muthukannan, A. Dinesh Babu, A. L. Hariharan, and T. Muthuramalingam, IOP Conf. Ser. Mater. Sci. Eng. 872, 12162 (2020) [Google Scholar]
  3. S. Divvala, M. S. Rani, Early strength properties of geopolymer concrete composites: An experiment study, 47, 3770–3777 (2021) [Google Scholar]
  4. K. Arunkumar, M. Muthukannan, A. S. Kumar, A. C. Ganesh, and R. K. Devi, Appl. Sci. Eng. Prog. 15, 1 (2022) [Google Scholar]
  5. M. Sadanayake, C. Gunashekara, D. Law, G. Zhang, S. Setunge, D. Wanijuru, 25, e00178 (2020) [Google Scholar]
  6. R. Garg, R. Garg, B. Chaudhary, S. M. Arif, Strength and microstructural analysis of nano silica based cement composites in presence of silica fume, 46, 6753–6756 (2021) [Google Scholar]
  7. S. K. Verma, C. S. Singla, G. Nadda, R. Kumar, Development of sustainable concrete using silica fume and stone dust, 32, 882–887 (2020) [Google Scholar]
  8. A. Suresh Kumar, M. Muthukannan, A. D. K. B. Irene, K. Arunkumar, and A. Chithambar Ganesh, Mater. Sci. Forum 1048, 345 (2022) [CrossRef] [Google Scholar]
  9. A. Suresh Kumar, M. Muthukannan, K. Arunkumar, M. Sriram, R. Vigneshwar, and A. Gulshan Sikkandar, Mater. Today Proc. (2022) [Google Scholar]
  10. K. Arunkumar, M. Muthukannan, A. S. Kumar, A. C. Ganesh, and R. K. Devi, 技術學刊 37, 225 (2022) [Google Scholar]
  11. F. N Okoye, S. Prakash, N. B Sing, Durability of fly ash based geopolymer concrete in the presence of silica fume, 149, 1062–1067 (2017) [Google Scholar]
  12. A. Suresh Kumar, M. Muthukannan, K. Arun Kumar, A. Chithambar Ganesh, and R. Kanniga Devi, Turkish J. Comput. Math. Educ. 12, 4070 (2021) [Google Scholar]
  13. G. Habert, C. Ouellet-Plamondon, Recent update on the environmental impact of geopolymers, 1, 17–23 (2016) [Google Scholar]
  14. F. Pacheco-Torgal, Introduction to handbook of alkali activated cements, mortars and concretes, 1–16 (2015) [Google Scholar]
  15. K. Arunkumar, M. Muthukannan, A. S. Kumar, A. C. Ganesh, and R. K. Devi, World J. Eng. (2021) [Google Scholar]
  16. K. Arunkumar, M. Muthukannan, A. Suresh Kumar, A. C. Ganesh, and R. K. Devi, Pollution 7, 993 (2021) [Google Scholar]
  17. K. Arunkumar, M. Muthukannan, A. S. Kumar, A. C. Ganesh, and R. K. Devi, World J. Eng. (2021) [Google Scholar]
  18. B. Chiaia, A.P. Fantilli, A. Guerini, G. Volpatti, D. Zampini, Eco mechanical index for structural concrete, 67, 386–392 (2014) [Google Scholar]
  19. A.M. Bakri, H. Kamarudin, M. Binhussain, I.K. Nizar, A.R. Rafiza, Y. Zarina, Comparison of geopolymer flyash and ordinary Portland cement to the strength of concrete, 19, 3592–3595 (2013) [Google Scholar]
  20. K. Arunkumar, M. Muthukannan, A. Suresh Kumar, A. C. Ganesh, and R. K. Devi, Pollution 7, 993 (2021) [Google Scholar]
  21. K. Arunkumar, A. Sureshkumar, A. C. Ganesh, L. Parthiban, and V. Premkumar, Res. Eng. Struct. Mater. 9, 113 (2023) [Google Scholar]
  22. O. Burciaga Diaz, R.X. Magallanes-Rivera, J.I. Escalante-Garcia, Alkali activated slag –metakaolin pastes: strength structural and microstructural characterization, 2, 111–127 (2013) [Google Scholar]
  23. P. Duxson, J.L. Provis, Designing precursors for geopolymer cements, 91, 3864–3869 (2008) [Google Scholar]
  24. Arunkumar, K., Muthukannan, M., Dinesh Babu, A., Hariharan, A. L., & Muthuramalingam, T. (2020). Effect on addition of Polypropylene fibers in wood ash-fly ash based geopolymer concrete. IOP Conference Series: Materials Science and Engineering, 872(1). https://doi.org/10.1088/1757–899X/872/1/012162 [Google Scholar]
  25. Arunkumar, K., Muthukannan, M., Kumar, A. S., Ganesh, A. C., & Devi, R. K. (2022). Cleaner environment approach by the utilization of low calcium wood ash in geopolymer concrete. Applied Science and Engineering Progress, 15(1), 1–13. https://doi.org/10.14416/j.asep.2021.06.005 [Google Scholar]
  26. A. C. G. Kadarkarai Arunkumar, Muthiah Muthukannan, Arunachalam Sureh Kumar, Int. J. Environ. Waste Manag. XX, (Accepted) (n.d.) [Google Scholar]
  27. A. Suresh Kumar, M. Muthukannan, K. Arunkumar, A. Chithambar Ganesh, and R. Kanniga Devi, Aust. J. Struct. Eng. 23, 254 (2022) [CrossRef] [Google Scholar]
  28. K. ArunKumar, M. Muthukannan, R. Raja Abinaya, and A. Suresh Kumar, Mater. Sci. Forum 1048, 333 (2022) [CrossRef] [Google Scholar]
  29. A. Suresh kumar, M. Muthukannan, R. Kanniga Devi, K. Arunkumar, and A. Chithambar Ganesh, Mater. Sci. Forum 1048, 321 (2022) [CrossRef] [Google Scholar]
  30. K. Arunkumar, M. Muthukannan, A. Suresh Kumar, A. C. Ganesh, and R. K. Devi, Eng. Appl. Sci. Res. 49, 235 (2022) [Google Scholar]
  31. A. Suresh Kumar, M. Muthukannan, R. Kanniga Devi, K. Arunkumar, and A. Chithambar Ganesh, Water Sci. Technol. (2021) [Google Scholar]
  32. M. Muthukannan, K. Arunkumar, A. Sureshkumar, A. C. Ganesh, R. K. Devi, A. Chithambar Ganesh, M. Vinod Kumar, K. Mukilan, A. Suresh Kumar, and K. Arun Kumar, Int. J. Environ. Waste Manag. 32, 469 (2023) [CrossRef] [Google Scholar]
  33. K. Arunkumar, M. Muthukannan, A. Sureshkumar, A. Chithambarganesh, and R. Rangaswamy Kanniga Devi, Res. Eng. Struct. Mater. 8, 19 (2022) [Google Scholar]
  34. S. K. Arunachalam, M. Muthiah, K. D. Rangaswamy, A. Kadarkarai, and C. G. Arunasankar, World J. Eng. ahead-of-p, (2021) [Google Scholar]
  35. Arunvivek, G. K., & Rameshkumar, D. (2022). Experimental Investigation on Feasibility of utilizing Phosphogypsum in E-Glass Fiber-incorporated Non-fired Ceramic Wall Tile. Journal of The Institution of Engineers (India): Series A, 103(2), 445–451. https://doi.org/10.1007/s40030–021-00604–2 [CrossRef] [Google Scholar]
  36. S.Y. Oderji, S.F.A Shah, B. Chen, M.R. Ahmad, Fresh and hardened properties of one part fly ash based geopolymer binders cured at room temperature: effect of slag and alkali activators 225, 1–10 (2019) [Google Scholar]
  37. Z. Abdollahnejad, S. Miraldo, F. Pacheco-Torgal, J.B Aguiar, Cost effective one part alkali activated mortars with low global warming potential for floor heating systems applications, 21, 412–429 (2017) [Google Scholar]
  38. Prithiviraj, C., Saravanan, J., Kumar, D. R., Murali, G., Vatin, N. I., & Swaminathan, P. (2022). Assessment of Strength and Durability Properties of Self-Compacting Concrete Comprising Alccofine. Sustainability (Switzerland), 14(10), 1–19. https://doi.org/10.3390/su14105895 [Google Scholar]
  39. Sankar, B., & Ramadoss, P. (2021). Review on fiber hybridization in ternary blended high-performance concrete. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.01.366 [Google Scholar]
  40. Sankar, B., & Ramadoss, P. (2022). Mechanical and Durability Properties of High Strength Concrete Incorporating Different Combinations of Supplementary Cementitious Materials: A Review. https://doi.org/10.1007/978–981-16–4321-7_45 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.