Open Access
Issue
E3S Web of Conf.
Volume 529, 2024
International Conference on Sustainable Goals in Materials, Energy and Environment (ICSMEE’24)
Article Number 01050
Number of page(s) 11
Section Materials
DOI https://doi.org/10.1051/e3sconf/202452901050
Published online 29 May 2024
  1. G. K. Arunvivek and D. Rameshkumar, “Experimental Investigation on Feasibility of utilizing Phosphogypsum in E-Glass Fiber-incorporated Non-fired Ceramic Wall Tile,” J. Inst. Eng. Ser. A, vol. 103, no. 2, pp. 445–451, 2022, doi: 10.1007/s40030–021-00604–2. [CrossRef] [Google Scholar]
  2. Hsissou, Rachid, Rajaa Seghiri, Zakaria Benzekri, Miloudi Hilali, Mohamed Rafik, and Ahmed Elharfi. “Polymer composite materials: A comprehensive review.” Composite structures 262 (2021): 113640. [CrossRef] [Google Scholar]
  3. K. Arunkumar, M. Muthukannan, A. S. Kumar, A. C. Ganesh, and R. K. Devi, “Cleaner environment approach by the utilization of low calcium wood ash in geopolymer concrete,” Appl. Sci. Eng. Prog., vol. 15, no. 1, pp. 1–13, 2022, doi: 10.14416/j.asep.2021.06.005. [Google Scholar]
  4. B. Sankar and P. Ramadoss, “Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete,” Int. J. Eng. Trans. B Appl., vol. 35, no. 8, pp. 1629–1640, 2022, doi: 10.5829/IJE.2022.35.08B.19. [Google Scholar]
  5. Zaghloul, Mahmoud Yousry Mahmoud, Moustafa Mahmoud Yousry Zaghloul, and Mai Mahmoud Yousry Zaghloul. “Developments in polyester composite materials–An in-depth review on natural fibres and nano fillers.” Composite Structures 278 (2021): 114698. [CrossRef] [Google Scholar]
  6. More, Chaitali V., Zainab Alsayed, Mohamed S. Badawi, Abouzeid A. Thabet, and Pravina P. Pawar. “Polymeric composite materials for radiation shielding: a review.” Environmental chemistry letters 19 (2021): 2057–2090. [CrossRef] [PubMed] [Google Scholar]
  7. Kumar, R., Ranjan, N., & Sidhu, R. S. (2024). Role of fillers and various sustainable innovations in the use of filler material for the preparation of composites. Green Composites Manufacturing: A Sustainable Approach, 19, 79 [CrossRef] [Google Scholar]
  8. Girish, K. M., Naik, R., Prashantha, S. C., Nagabhushana, H., Nagaswarupa, H. P., Raju, K. A.,... & Nagabhushana, B. M. (2015). Zn2TiO4: Eu3+ nanophosphor: self explosive route and its near UV excited photoluminescence properties for WLEDs. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 138, 857–865. [CrossRef] [Google Scholar]
  9. Mokobia, K., Jonathan, E. M., Oyiborhoro, G., Maliki, M., & Ifijen, I. H. (2024, February). Environmental degradation of polymer-based composite materials: challenges and mitigation strategies. In TMS Annual Meeting & Exhibition (pp. 1218–1236). Cham: Springer Nature Switzerland. [Google Scholar]
  10. Bhukya, M. N., Kota, V. R., & Depuru, S. R. (2019). A simple, efficient, and novel standalone photovoltaic inverter configuration with reduced harmonic distortion. IEEE access, 7, 43831–43845. [CrossRef] [Google Scholar]
  11. Messinese, E., Pitirollo, O., Grimaldi, M., Milanese, D., Sciancalepore, C., & Cavazza, A. (2024). By-products as sustainable source of bioactive compounds for potential application in the field of food and new materials for packaging development. Food and Bioprocess Technology, 17(3), 606–627. [CrossRef] [Google Scholar]
  12. Feng, Y., Hao, H., Lu, H., Chow, C. L., & Lau, D. (2024). Exploring the development and applications of sustainable natural fiber composites: A review from a nanoscale perspective. Composites Part B: Engineering, 111369. [Google Scholar]
  13. Naresh, M., & Munaswamy, P. (2019). Smart agriculture system using IoT technology. International journal of recent technology and engineering, 7(5), 98–102. [Google Scholar]
  14. Teeraphantuvat, T., Jatuwong, K., Jinanukul, P., Thamjaree, W., Lumyong, S., & Aiduang, W. (2024). Improving the physical and mechanical properties of mycelium-based green composites using paper waste. Polymers, 16(2), 262 [CrossRef] [PubMed] [Google Scholar]
  15. Surya, M. S., Sridhar, A., & Prasad, M. S. (2024). Biomedical Applications of Composite Materials. Mechanical Engineering in Biomedical Applications: Bio-3D Printing, Biofluid Mechanics, Implant Design, Biomaterials, Computational Biomechanics, Tissue Mechanics, 277–289. [Google Scholar]
  16. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482 [CrossRef] [Google Scholar]
  17. Karimi, A., Rahmatabadi, D., & Baghani, M. (2024). Various FDM mechanisms used in the fabrication of continuous-fiber reinforced composites: a review. Polymers, 16(6), 831 [CrossRef] [PubMed] [Google Scholar]
  18. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z.,... & Galal, A. M. (2022). Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35, 102113 [Google Scholar]
  19. Mehta, J., Hooda, Y., Mittal, P., & Gupta, P. Green Composite: Fabrication, Characterization, Evaluation, and Application. In Fabrication Techniques and Machining Methods of Advanced Composite Materials (pp. 82–100). CRC Press. [Google Scholar]
  20. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X.,... & Zhang, W. (2020). Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, 145686 [CrossRef] [Google Scholar]
  21. Lavagnini, I. R., Campos, J. V., Jesus, L. M., Lobo, A. O., Ghose, S. K., Raj, R., & Pallone, E. M. (2024). In-situ synchrotron X-ray diffraction of hydroxyapatite-zirconia composite during conventional and flash sintering. Journal of the European Ceramic Society. [Google Scholar]
  22. Indira, D. N. V. S. L. S., Ganiya, R. K., Babu, P. A., Xavier, A. J., Kavisankar, L., Hemalatha, S.,... & Yeshitla, A. (2022). Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, 2022. [Google Scholar]
  23. Alrobei, H., Prashanth, M. K., Manjunatha, C. R., Kumar, C. P., Chitrabanu, C. P., Shivaramu, P. D.,... & Raghu, M. S. (2021). Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms, kinetics and statistical error analysis. Ceramics International, 47(7), 10322–10331. [CrossRef] [Google Scholar]
  24. Ribeiro Junior, R. F., & Gomes, G. F. (2024). On the Use of Machine Learning for Damage Assessment in Composite Structures: A Review. Applied Composite Materials, 31(1), 1–37. [CrossRef] [Google Scholar]
  25. Kulandaivel, D., Rahamathullah, I. G., Sathiyagnanam, A. P., Gopal, K., & Damodharan, D. (2020). Effect of retarded injection timing and EGR on performance, combustion and emission characteristics of a CRDi diesel engine fueled with WHDPE oil/diesel blends. Fuel, 278, 118304 [CrossRef] [Google Scholar]
  26. Szczesio-Wlodarczyk, A., Garoushi, S., Vallittu, P., Bociong, K., & Lassila, L. (2024). Polymerization shrinkage stress of contemporary dental composites: Comparison of two measurement methods. Dental Materials Journal, 2023–192. [Google Scholar]
  27. Hora, S. K., Poongodan, R., De Prado, R. P., Wozniak, M., & Divakarachari, P. B. (2021). Long short-term memory network-based metaheuristic for effective electric energy consumption prediction. Applied Sciences, 11(23), 11263 [CrossRef] [Google Scholar]
  28. Azka, M. A., Adam, A., Ridzuan, S. M., Sapuan, S. M., & Habib, A. (2024). A review on the enhancement of circular economy aspects focusing on nanocellulose composites. International Journal of Biological Macromolecules, 132052. [Google Scholar]
  29. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. (2018). Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4(3). [Google Scholar]
  30. Castro-Franco, A. D., Siqueiros-Hernández, M., García-Angel, V., Mendoza-Muñoz, I., Vargas-Osuna, L. E., & Magaña-Almaguer, H. D. (2024). A Review of Natural Fiber-Reinforced Composites for Lower-Limb Prosthetic Designs. Polymers, 16(9), 1293 [CrossRef] [PubMed] [Google Scholar]
  31. Lakshmi, L., Reddy, M. P., Santhaiah, C., & Reddy, U. J. (2021). Smart phishing detection in web pages using supervised deep learning classification and optimization technique ADAM. Wireless Personal Communications, 118(4), 3549–3564. [CrossRef] [Google Scholar]
  32. Spandana, K., & Rao, V. S. (2018). Internet of Things (Iot) Based smart water quality monitoring system. International Journal of Engineering and Technology (UAE), 7(3), 259–262. [Google Scholar]
  33. Kumar, K. U., Babu, P., Basavapoornima, C., Praveena, R., Rani, D. S., & Jayasankar, C. K. (2022). Spectroscopic properties of Nd3+-doped boro-bismuth glasses for laser applications. Physica B: Condensed Matter, 646, 414327 [CrossRef] [Google Scholar]
  34. Damodharan, D., Rajesh Kumar, B., Gopal, K., De Poures, M. V., & Sethuramasamyraja, B. (2019). Utilization of waste plastic oil in diesel engines: a review. Reviews in Environmental Science and Bio/Technology, 18(4), 681–697. [CrossRef] [Google Scholar]
  35. Girish, K. M., Prashantha, S. C., Nagabhushana, H., Ravikumar, C. R., Nagaswarupa, H. P., Naik, R.,... & Umesh, B. (2018). Multi-functional Zn2TiO4: Sm3+ nanopowders: excellent performance as an electrochemical sensor and an UV photocatalyst. Journal of Science: Advanced Materials and Devices, 3(2), 151–160. [CrossRef] [Google Scholar]
  36. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S.,... & Girish, K. M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd–Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25–36. [CrossRef] [Google Scholar]
  37. Raj, T. V., Hoskeri, P. A., Muralidhara, H. B., Manjunatha, C. R., Kumar, K. Y., & Raghu, M. S. (2020). Facile synthesis of perovskite lanthanum aluminate and its green reduced graphene oxide composite for high performance supercapacitors. Journal of Electroanalytical Chemistry, 858, 113830 [CrossRef] [Google Scholar]
  38. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  39. Jisha, P. K., Prashantha, S. C., & Nagabhushana, H. (2017). Luminescent properties of Tb doped gadolinium aluminate nanophosphors for display and forensic applications. Journal of Science: Advanced Materials and Devices, 2(4), 437–444. [CrossRef] [Google Scholar]
  40. Hongda, C., & Xu, Z. (2024). Market and Future Prospects of High Thermal Conductivity Composite Materials. Thermal Management Materials for Electronic Packaging: Preparation, Characterization, and Devices, 287–333. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.