Open Access
| Issue |
E3S Web of Conf.
Volume 531, 2024
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2024)
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 9 | |
| Section | Industrial Decarbonization and Green Chemistry | |
| DOI | https://doi.org/10.1051/e3sconf/202453101012 | |
| Published online | 03 June 2024 | |
- A. Tajibaev; B. Ibragimov; S. Narziev; M. Alimov, AIP Conf. Proc. 2612, 060009 (2023) https://doi.org/10.1063/5.0115527 [CrossRef] [Google Scholar]
- A. Tajibaev, Kadishaev T., Ibrahimov K.I., ASEAN Journal on Science & Technology for Development 39, 4, 2022, 346-351. DOI 10.5281/Zenodo.7034460 [Google Scholar]
- T. Khankelov. (2001). Stroitelnye i Dorozhnye Mashiny, (5), 34-36. doi: https://portal.issn.org/resource/ISSN/0039-2391 [Google Scholar]
- T. Khankelov, T. Askarhodzhaev, N. Mukhamedova. (2020). Journal of Critical Reviews. 7, 27-28, doi: https://doi.org/10.31838/jcr.07.04.07 [Google Scholar]
- T. Khankelov, et.al., Determination of the lengths of rebounds of elastic components of solid municipal waste The 1st International Conference on problem and Perspectives of Modern Science AIP Conf.Proc.,1 -6 (2020). doi: https://doi.org/10.1063/5.0089528 [Google Scholar]
- B. Kosimbetov, T. Khankelov. (2021). E3S Web of Conferences 264(11): 02063. CONMECHYDRO-2021,1-6, doi: https://doi.org/10.1051/e3sconf/202126402063 [CrossRef] [EDP Sciences] [Google Scholar]
- Belov M.A. About the basic concepts and definitions of basing theory. Bulletin of “UlSTU” Ekaterinburg. 2006 No. 4. P. 34-37. [Google Scholar]
- Anikeeva Yu.A., Iznairov B.M. Basing of blanks in mechanical engineering. Bulletin of “SSTU” Saratov. 2013.No. 1. P. 84-88. [Google Scholar]
- Antonenkova T.V. Technological bases: concept and problems of formation. Bulletin of “AGTU” Astrakhan. 2022. No. 2. P. 21-32. [Google Scholar]
- Sysoev Yu.S., Tomilin S.A. Basing of blanks of large-sized cylindrical parts for cutting. News from universities. Mechanical engineering. Moscow 2004. No. 1. P. 63-69. [Google Scholar]
- Lelyukhin V.E., Antonenkova T.V., Kolesnikova O.V. Structural parametric representation of the relative position of surfaces of parts. Bulletin of the engineering school “FEFU” Vladivostok 2016. No. 1. P. 3-9. [Google Scholar]
- Ubaydullaev G.K. Development of a methodology for determining and selecting technological bases for parts during machining. Tashkent: TADI Bulletin. 2010/2. pp. 33-38. [Google Scholar]
- Gayrat Ubaydullaev, Davron Riskaliev, Nurilloxon Ergashev, Aziz Rashidov, Sanat Shadiev Determination of installation bases of parts during their mechanical processing. International Scientific Conference Construction Mechanics, Hydraulics & Water Resources Engineering. 2021. P. 128-137. [Google Scholar]
- Ubaydullaev G.K. Technological limitations when basing parts. Tashkent: TADI Bulletin. 2016/4. pp. 28-35. [Google Scholar]
- Ubaydullaev G.K. Manufacturability of the surfaces of the crankshaft pulley hub of the engine when it is based. Tashkent: TADI Bulletin. 2017/1. pp. 15-18. [Google Scholar]
- Ubaydullaev Gayrat, Shadiev Sanat Method for forming replaceable assembly and units. E Conference Zone, 45–49. [Google Scholar]
- Lelyukhin V.E., Kolesnikova O.V., Ruzhitskaya E.V. Geometry of Six-Dimensional Space for Engineering. Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020). Lecture Notes in Mechanical Engineering, 2021, pp. 386-394. [Google Scholar]
- Zhou C., Liu Z., Qiu C., Tan J. Three-dimensional tolerance analysis of discrete surface structures based on the torsor cluster model. Assembly Automation. 2021. V. 41. N.4 P. 486-500. [CrossRef] [Google Scholar]
- Lelyukhin V.E., Kolesnikova O.V., Ruzhitskaya E.V. The Geometry of Non-Ideal Objects in Process Engineering for Processing Parts on Machine Tools. Proceedings of the 7th International Conference on Industrial Engineering (ICIE 2021). Lecture Notes in Mechanical Engineering. Springer, 2022, pp. 165-173. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.