EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 533 (2024) E3S Web Conf., 533 (2024) 04003 References
Open Access
Issue
E3S Web Conf.
Volume 533, 2024
XXVII International Scientific Conference on Advance in Civil Engineering “Construction the Formation of Living Environment” (FORM-2024)
Article Number 04003
Number of page(s) 11
Section Sustainable Engineering
DOI https://doi.org/10.1051/e3sconf/202453304003
Published online 07 June 2024
  1. N. Abid, M. Ikram, J. Wu and M. Ferasso, Towards environmental sustainability: exploring the nexus among ISO 14001, governance indicators and green economy in Pakistan. Sustainable Production and Consumption. 27, 653–666 (2021). [CrossRef] [Google Scholar]
  2. H. M. Madsen, M. M. Andersen, M. Rygaard and P. S. Mikkelsen, Definitions of event magnitudes, spatial scales, and goals for climate change adaptation and their importance for innovation and implementation. Water research. 144, 192–203 (2018). [CrossRef] [Google Scholar]
  3. A. Reichel and L. F. Mortensen, Environmental indicator report 2014: environmental impacts of production-consumption systems in europe. Luxembourg: European Environment Agency. (EUR-OP, 2014). [Google Scholar]
  4. G. M. Mace, The ecology of natural capital accounting. Oxford Review of Economic Policy. 35 (1), 54–67 (2019). [CrossRef] [Google Scholar]
  5. S. H. Khahro, D. Kumar, F. H. Siddiqui, T. H. Ali, M. S. Raza and A. R. Khoso, Optimizing energy use, cost and carbon emission through building information modelling and a sustainability approach: A case-study of a hospital building. Sustainability. 13 (7), 3675 (2021). [CrossRef] [Google Scholar]
  6. B. Li, Y. Pan, L. Li and M. Kong, Life Cycle Carbon Emission Assessment of Building Refurbishment: A Case Study of Zero-Carbon Pavilion in Shanghai Yangpu Riverside. Applied Sciences. 12 (19), 9989 (2022). [CrossRef] [Google Scholar]
  7. R. Santos, A. A. Costa, J. D. Silvestre and L. Pyl, Integration of LCA and LCC analysis within a BIM-based environment. Automation in Construction 103, 127–149 (2019). [CrossRef] [Google Scholar]
  8. M. Stanitsas, K. Kirytopoulos and V. Leopoulos, Integrating sustainability indicators into project management: The case of construction industry. Journal of Cleaner Production. 279, 123774 (2021). [CrossRef] [Google Scholar]
  9. G. Bergonzoni, V. Marino, M. Elagiry and A. Costa, Assessing residential buildings compliance with sustainability rating systems through a BIM-Based approach Multidisciplinary Digital Publishing Institute Proceedings. 65 (1), 22 (2021). [Google Scholar]
  10. H. Ferdosi, H. Abbasianjahromi, S. Banihashemi and M. BIM applications in sustainable construction: scientometric and state-of-the-art review. Ravanshadnia, International Journal of Construction Management. 23 (12), 1969–1981 (2023). [CrossRef] [Google Scholar]
  11. O. Babalola, E. Ibem and I. Ezema, Lean construction: an approach to achieving sustainable built environment in Nigeria. in Proceedings of the ICSSD 2019 conference, Science, Technology and Research: Keys to Sustainable Development, Ota, Nigeria, 6–8 May 2019.Journal of Physics: Conference Series. 1299 012007 (2019). [Google Scholar]
  12. D. S. Costa, H. S. Mamede and M. M. da Silva, A method for selecting processes for automation with AHP and TOPSIS. Heliyon. 9 (3) (2023). [Google Scholar]
  13. H. J. Mohammed, M. M. Kasim and I. N. Shaharanee, Shaharanee, Evaluation of E-learning approaches using AHP-TOPSIS technique. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) 10 (1-10), 7–10 (2018). [Google Scholar]
  14. D. Han, M. Kalantari and A. Rajabifard, Rajabifard, Identifying and prioritizing sustainability indicators for China’s assessing demolition waste management using modified Delphi–analytic hierarchy process method. Waste Management & Research. 0734242X231166309 (2023). [Google Scholar]
  15. T. L. Saaty, Decision making with dependence and feedback: The analytic network process. (RWS publications Pittsburgh, 1996). [Google Scholar]
  16. I. O. f. Standardization, Environmental management: life cycle assessment; Principles and Framework. (ISO, 2006). [Google Scholar]
  17. R. Frischknecht, M. Balouktsi, T. Lützkendorf, A. Aumann, H. Birgisdottir, E. G. Ruse, A. Hollberg, M. Kuittinen, M. Lavagna and A. Lupišek, Environmental benchmarks for buildings: needs, challenges and solutions—71st LCA forum, Swiss Federal Institute of Technology, Zürich. The International Journal of Life Cycle Assessment. 24, 2272–2280 (2019). [CrossRef] [Google Scholar]
  18. R. K. Zimmermann, S. Bruhn and H. Birgisdóttir, BIM-based life cycle assessment of buildings—An investigation of industry practice and needs. Sustainability. 13 (10), 5455 (2021). [CrossRef] [Google Scholar]
  19. L. Wastiels and R. Decuypere, Identification and comparison of LCA-BIM integration strategies, in Proceedings of the SBE19 Graz 2019 conference. Sustainable Built Environment D-A-CH, Graz, Austria, September 11–14 2019, IOP conference series: earth and environmental science. 323 012101 (2019). [Google Scholar]
  20. L. Á. Antón and J. Díaz, Integration of life cycle assessment in a BIM environment. Procedia Engineering. 85, 26–32 (2014). [CrossRef] [Google Scholar]
  21. H. Penttilä, Describing the changes in architectural information technology to understand design complexity and free-form architectural expression. Journal of Information Technology in Construction (ITcon). 11 (29), 395–408 (2006). [Google Scholar]
  22. J. K. W. Wong and J. Zhou, Enhancing environmental sustainability over building life cycles through green BIM: A review. Automation in construction. 57, 156–165 (2015). [CrossRef] [Google Scholar]
  23. M. N. Nwodo and C. J. Anumba, A review of life cycle assessment of buildings using a systematic approach. Building and Environment. Building and Environment. 162, 106290 (2019). [CrossRef] [Google Scholar]
  24. K. A. Farhan, A. J. Naji, H. Al-Jelawy and A.-B. R. H. Kadhim, Effect of Coarse Plastic Waste Aggregates on the Performance of Concrete-Filled Steel Tube Columns and Their Life Cycle Assessment, in Proceedings of the IICETA 2023 conference, Engineering Technology and its Applications, Al-Najaf, Iraq, July 15-16 (2023). [Google Scholar]
  25. A. Sharma, A. Saxena, M. Sethi and V. Shree, Life cycle assessment of buildings: a review. Renewable and Sustainable Energy Reviews. 15 (1), 871–875 (2011). [CrossRef] [Google Scholar]
  26. A. Luca, G. Antonio and M. Rosa, Life cycle assessment of a new industrial process for sustainable construction materials. Ecological Indicators. 148, 110042 (2023). [CrossRef] [Google Scholar]
  27. M. K. Ansah, X. Chen, H. Yang, L. Lu and P. T. Lam, Developing an automated BIM-based life cycle assessment approach for modularly designed high-rise buildings. Environmental Impact Assessment Review. 90, 106618 (2021). [CrossRef] [Google Scholar]
  28. A. Hollberg, G. Genova and G. Habert, Evaluation of BIM-based LCA results for building design. Automation in Construction. 109, 102972 (2020). [CrossRef] [Google Scholar]
  29. M. A. H. Rad, F. Jalaei, A. Golpour, S. S. H. Varzande and G. Guest, BIM-based approach to conduct Life Cycle Cost Analysis of resilient buildings at the conceptual stage. Automation in Construction. 123, 103480 (2021). [CrossRef] [Google Scholar]
  30. J. Lee, H. Yang, J. Lim, T. Hong, J. Kim and K. Jeong, BIM-based preliminary estimation method considering the life cycle cost for decision-making in the early design phase. Journal of Asian Architecture and Building Engineering. 19 (4), 384–399 (2020). [CrossRef] [Google Scholar]
  31. M. Nour, O. Hosny and A. Elhakeem, A BIM based energy and lifecycle cost analysis/optimization approach. International Journal of Engineering Research and Applications. 2 (6), 411–418 (2012). [Google Scholar]
  32. R. Santos, A. A. Costa, J. D. Silvestre, T. Vandenbergh and L. Pyl, BIM-based life cycle assessment and life cycle costing of an office building in Western Europe. Building and Environment. 169, 106568 (2020). [CrossRef] [Google Scholar]
  33. M. Nwodo, C. Anumba and S. Asadi, BIM-based life cycle assessment and costing of buildings: Current trends and opportunities. in Computing in Civil Engineering 2017 (2017), pp. 51–59. [Google Scholar]
  34. K. Lu, X. Deng, X. Jiang, B. Cheng and V. W. Tam, A review on life cycle cost analysis of buildings based on building information modeling. Journal of Civil Engineering and Management. 29 (3), 268–288-268–288 (2023). [CrossRef] [Google Scholar]
  35. M. Marzouk, S. Azab and M. Metawie, BIM-based approach for optimizing life cycle costs of sustainable buildings. Journal of cleaner production. 188, 217–226 (2018). [CrossRef] [Google Scholar]
  36. J. Veselka, M. Nehasilová, K. Dvořáková, P. Ryklová, M. Volf, J. Růžička and A. Lupíšek, Recommendations for Developing a BIM for the Purpose of LCA in Green Building Certifications. Sustainability. 12 (15), 6151 (2020). [CrossRef] [Google Scholar]
  37. L. P. N. Sanhudo and J.P.D.S.P. Martins, Building information modelling for an automated building sustainability assessment. Civil Engineering and Environmental Systems 35 (1-4), 99–116 (2018). [CrossRef] [Google Scholar]
  38. J. P. Carvalho, I. Alecrim, L. Bragança and R. Mateus, Integrating BIM-based LCA and building sustainability assessment. Sustainability. 12 (18), 7468 (2020). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.