Open Access
Issue
E3S Web of Conf.
Volume 540, 2024
1st International Conference on Power and Energy Systems (ICPES 2023)
Article Number 02002
Number of page(s) 14
Section Electric Drives and Vehicles
DOI https://doi.org/10.1051/e3sconf/202454002002
Published online 21 June 2024
  1. U. R. Muduli and R. K. Behera, “Virtual Vector based SVPWM-DTC for Five-Phase Two-Level VSI fed Induction Motor Drive,” 2021 1st International Conference on Power Electronics and Energy (ICPEE), 2021, pp. 1–6, doi: 10.1109/ICPEE50452.2021.9358755. [Google Scholar]
  2. S. G. Malla, “A review on Direct Torque Control (DTC) of induction motor: With applications of fuzzy”, 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), 2016, pp. 4557–4567, doi: 10.1109/ICEEOT.2016.7755579. [Google Scholar]
  3. B. K. Bose, “Modern Power Electronics and AC Drives, 2001. [Google Scholar]
  4. A. P. Biswal and S. Satpathy, “Vector Control of 3-Phase Induction Motor,” 2021 1st Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology(ODICON), 2021, pp. 1–4, doi: 10.1109/ODICON50556.2021.9428930. [Google Scholar]
  5. C. P. Priyanka and G. Jagdanand, “Multiphase Induction Motor with Different Speed Ratio for Gearless Electric vehicles,” 2022 IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE), 2022, pp. 1–6, doi: 10.1109/PESGRE52268.2022.9715800. [Google Scholar]
  6. V. Fireţeanu, A. -I. Constantin and C. Dumitru, “Finite Element Analysis of the Performances of the 3-Phase, 5-Phase, 7-Phase and 9-Phase Squirrel-Cage Induction Motors,” 2021 12th International Symposium on Advanced Topics in Electrical Engineering (ATEE), 2021, pp. 1–6, doi: 10.1109/ATEE52255.2021.9425068. [Google Scholar]
  7. U. R. Muduli, B. Chikondra and R. K. Behera, “Space Vector PWM Based DTC Scheme With Reduced Common Mode Voltage for Five-Phase Induction Motor Drive,” IEEE Transactions on Power Electronics, vol. 37, no. 1, pp. 114–124, Jan. 2022, doi: 10.1109/TPEL.2021.3092259. [CrossRef] [Google Scholar]
  8. S. Ahmad and A. Mishra, “Mathematical Modelling, Simulation and Control of Five-Phase Induction Motor Drives,” 2020 International Conference on Emerging Frontiers in Electrical and Electronic Technologies (ICEFEET), 2020, pp. 1–4, doi: 10.1109/ICEFEET49149.2020.9186999. [Google Scholar]
  9. C. Pradhan, M. K. Senapati, S. G. Malla, P. K. Nayak and T. Gjengedal, “Coordinated Power Management and Control of Standalone PV-Hybrid System With Modified IWO-Based MPPT,” in IEEE Systems Journal, vol. 15, no. 3, pp. 3585–3596, Sept. 2021, doi: 10.1109/JSYST.2020.3020275. [CrossRef] [Google Scholar]
  10. M. Morawiec and F. Wilczyński, “Control Strategy of a Five-Phase Induction Machine Supplied by the Current Source Inverter With the Third Harmonic Injection,” in IEEE Transactions on Power Electronics, vol. 37, no. 8, pp. 9539–9550, Aug. 2022, doi: 10.1109/TPEL.2022.3148526. [CrossRef] [Google Scholar]
  11. U. R. Muduli, R. K. Behera, K. Al Hosani and M. S. E. Moursi, “Direct Torque Control With Constant Switching Frequency for Three-to-Five Phase Direct Matrix Converter Fed Five-Phase Induction Motor Drive,” in IEEE Transactions on Power Electronics, vol. 37, no. 9, pp. 11019–11033, Sept. 2022, doi: 10.1109/TPEL.2022.3167477. [CrossRef] [Google Scholar]
  12. U. R. Muduli, B. Chikondra and R. K. Behera, “Continuous and Discontinuous SVPWM with Switching Loss Control for Five-Phase Two-Level VSI fed Induction Motor Drive,” 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2020, pp. 1–6, doi: 10.1109/PEDES49360.2020.9379717. [Google Scholar]
  13. D. Raja and G. Ravi, “Design of Five Phase Voltage Source Inverter with Time Modulated Switching Technique for Induction Motor Drive,” 2019 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC), 2019, pp. 215–220, doi: 10.1109/ICCPEIC45300.2019.9082354. [Google Scholar]
  14. S. He, X. Sui, D. Zhou and F. Blaabjerg, “Torque Ripple Suppression of a Fivephase Induction Motor under Single-phase Open,” 2020 IEEE 9th International Power Electronics and Motion Control Conference (IPEMC2020-ECCE Asia), 2020, pp. 3470–3475, doi: 10.1109/IPEMC-ECCEAsia48364.2020.9367677. [Google Scholar]
  15. B. Ch, U. R. Muduli and R. K. Behera, “Performance Comparison of Five-Phase Three-Level NPC to Five-Phase Two-Level Voltage Source Inverter,” 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2018, pp. 1–6, doi: 10.1109/PEDES.2018.8707510. [Google Scholar]
  16. B. Chikondra, U. R. Muduli and R. K. Behera, “Performance Comparison of Five-Phase Three-Level NPC to Five-Phase Two-Level VSI,” IEEE Transactions on Industry Applications, vol. 56, no. 4, pp. 3767–3775, July-Aug. 2020, doi: 10.1109/TIA.2020.2988014. [Google Scholar]
  17. Depenbrock M. Direct self-control (DSC) of inverter fed induktion machine. In1987 IEEE Power Electronics Specialists Conference 1987 Jun 21 (pp. 632–641). IEEE. https://doi.org/10.1109/pesc.1987.7077236 [Google Scholar]
  18. M. Perin, L. A. Pereira, L. F. A. Pereira and G. Nicol, “Estimation of Parameters of Five-Phase Induction Motors Using Step Voltage At Standstill,” in IEEE Transactions on Energy Conversion, vol. 36, no. 4, pp. 3491–3501, Dec. 2021, doi: 10.1109/TEC.2021.3085221. [CrossRef] [Google Scholar]
  19. Siva Ganesh Malla, “Modeling of 5-Phase Induction Motor: A Review”, International Journal of New Technologies in Science and Engineering (IJNTSE), Vol. 8, Issue. 3, pp. 1–8, March. 2022. [Google Scholar]
  20. Priyanka Malla, “Novel Control Technique for MPPT of PV Standalone System with TSK Fuzzy controller”, International Journal of New Technologies in Science and Engineering (IJNTSE), Vol. 8, Issue. 8, pp. 1–7, Aug. 2022. [Google Scholar]
  21. Priyanka Malla, “TSK Fuzzy Controller for Vector Control of Induction Motor”, International Journal of New Technologies in Science and Engineering (IJNTSE), Vol. 8, Issue. 1, pp. 1–5, Jan. 2022. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.