Open Access
| Issue |
E3S Web Conf.
Volume 543, 2024
International Process Metallurgy Conference (IPMC 2023)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 9 | |
| Section | Extractive Metallurgy | |
| DOI | https://doi.org/10.1051/e3sconf/202454302003 | |
| Published online | 03 July 2024 | |
- F. Schrama, E. Beunder, B. Van den Berg, Y. Yang and R. Boom, “Sulphur removal in ironmaking and oxygen steelmaking,” Ironmaking and Steelmaking, vol. 45, pp. 333-343, 2017. [CrossRef] [Google Scholar]
- C. Fincham and F. Richardson, “The behavior of sulphur in silicate and aluminate melts,” Proceedings of the Royal Society A, no. 223, pp. 40-62, 1954. [Google Scholar]
- B.-K. Jeong, G.-H. Bang and Y.-B. Kang, “Role of liquid and solid particles in solid-liquid mixed fluxes on sulfur removal from molten iron under centrifugal stirring by an impeller,” Powder Technology, vol. 396, pp. 1-12, 2022. [CrossRef] [Google Scholar]
- P. Tsakiridis, S. Agatzini-Leonardou and P. Oustadakis, “Red mud addition in the raw meal for the production of portland cement clinker,” Journal of Hazardous Materials, vol. 116, pp. 103-110, 2004. [CrossRef] [PubMed] [Google Scholar]
- W. Liu, X. Chen, W. Li, Y. Yu and K. Yan, “Environmental assessment, management and utilization of red mud in,” Journal of Cleaner Production, vol. 84, pp. 606-610, 2014. [CrossRef] [Google Scholar]
- T. Jeong and J. Park, “Effect of Fluorspar and Industrial Wastes (Red Mud and Ferromanganese Slag) on Desulfurization Efficiency of Molten Steel,” Metallurgical and Materials Transactions B, vol. 51, pp. 2309-2320, 2020. [CrossRef] [Google Scholar]
- B. Zhang, C. Liu and M. Jiang, “A new method of red mud recycling in the process of hot metal pre-treatment,” Materials Research and Technology, vol. 117, p. 115, 2020. [Google Scholar]
- K.-H. Bang and Y.-B. Kang, “Recycling red mud to develop a competitive desulfurization flux for Kanbara Reactor (KR) desulfurization process,” Journal of Hazardous Materials, vol. 440, p. art. no. 129752, 2022. [Google Scholar]
- D. Lindstrom and D. Sichen, “Study on Desulfurization Abilities of Some Commonly Used Desulfurization Agents,” steel research international, vol. 86, pp. 73-83, 2015. [CrossRef] [Google Scholar]
- Y. Nakai, I. Sumi, N. Kikuchi, K. Tanaka and Y. Miki, “Powder Blasting in Hot Metal Desulfurization by Mechanical,” ISIJ International, vol. 57, pp. 1029-1036, 2017. [CrossRef] [Google Scholar]
- K. Takahashi, K. Utagawa, H. Shibata, S.-y. Kitamura, N. Kikuchi and Y. Kishimoto, “Influence of Solid CaO and Liquid Slag on Hot Metal Desulfurization,” ISIJ International, vol. 52, pp. 10-17, 2012. [CrossRef] [Google Scholar]
- R. Pezzifi, A. Berger, F. Grillo, E. Junca, H. Furtado and J. Oliviera, “Analysis of the influence of solid and liquid phases on steel desulfurization with slags from the CaO-Al2O3 systems using computational thermodynamics,” Journal of Materials Research and Technology, vol. 9, pp. 838-846, 2020. [CrossRef] [Google Scholar]
- C. Bale, E. Belisle, P. Chartrand, S. Decterov, G. Eriksson, A. Gheribi, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melancon, A. Pelton, S. Petersen, C. Robelin, J. Sangster, P. Spencer and M.-A. Van Ende, “FactSage thermochemical software and databases, 2010-2016,” Calphad, vol. 54, pp. 35-53, 2016. [CrossRef] [Google Scholar]
- B. Deo and R. Boom, Fundamentals of Steelmaking Metallurgy, Hertfordshire, UK: Prentice Hall International, 1993. [Google Scholar]
- Y. Nakai, I. Sumi, H. Matsuno, N. Kikuchi and Y. Kishimoto, “Effect of flux dispersion behavior on desulfurization of hot metal,” ISIJ International, vol. 50, pp. 403-410, 2010. [CrossRef] [Google Scholar]
- Y. Nakai, I. Sumi, N. Kikuchi, Y. Kishimoto and Y. Miki, “Aggregation behavior of desulfurization flux in hot metal desulfurization with mechanical stirring,” ISIJ International, vol. 53, pp. 1411-1419, 2013. [CrossRef] [Google Scholar]
- M. van Deen, T. Betrand, N. Vu, D. Quere, E. Clement and A. Lindner, “Particles accelarate the detachment of viscous liquids,” Rheologica Acta, vol. 52, pp. 403-412, 2013. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.