Open Access
| Issue |
E3S Web Conf.
Volume 543, 2024
International Process Metallurgy Conference (IPMC 2023)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 15 | |
| Section | Extractive Metallurgy | |
| DOI | https://doi.org/10.1051/e3sconf/202454302005 | |
| Published online | 03 July 2024 | |
- Q. Li, S. Ma, X. Shen, M. Li, Z. Zou, Effects of impeller rotational speed and immersion depth on flow pattern, mixing and interface characteristics for kanbara reactors using vof-smm simulations, Metals, 11.10 (2021) [Google Scholar]
- A. Ma, S. Mostaghel, K. Chattopadhyay, Review of applicable desulphurization models for crude ferronickel refining, Miner. Process. Extr. Metall.: Trans. Inst. Min. Metall., 127.1, 10-28 (2018) [Google Scholar]
- Q. Wang, S. Jia, F. Tan, G. Li, D. Ouyang, S. Zhu, Numerical Study on Desulphurization Behavior During Kanbara Reactor Hot Metal Treatment, Metall. Mater. Trans. B., 52.2, 1085-1094 (2021) [CrossRef] [Google Scholar]
- Q. Li, X. Shen, S. Guo, M. Li, Z. Zou, Computational Investigation on Effect of Impeller Dimension on Fluid Flow and Interface Behavior for Kanbara Reactor Hot Metal Treatment, Steel Res. Int., 92.11, 1-15 (2021) [Google Scholar]
- W. Zuo, Introduction of Computational Fluid Dynamics [Google Scholar]
- P.K. Kundu, I.M. Cohen, D.R. Dowling, Fluid Mechanics (1986) [Google Scholar]
- K. Kato, T. Yamamoto, S.V. Komarov, R. Taniguchi, Y. Ishiwata, Evaluation of mass transfer in an aluminium melting furnace stirred mechanically during flux treatment, Mater. Trans., 60.9, 2008-2015 (2019) [CrossRef] [Google Scholar]
- M. Li, Y. Tan, Y. Liu, J. Sun, D. Xie, Z. Liu, Effects of geometrical and physical factors on light particles dispersion by agitation characteristic curve, Chin. J. Chem. Eng., 27.10, 2313-2324 (2019) [CrossRef] [Google Scholar]
- M. Li, Y. Tan, J. Sun, D. Xie, Z. Liu, Drawdown mechanism of light particles in baffled stirred tank for the KR desulphurization process, Chin. J. Chem. Eng., 27.2, 247-256 (2019) [CrossRef] [Google Scholar]
- F. Crundwell, M. Moats, T. Robinson, V. Ramachandran, W.G. Davenport, Extractive Metallurgy of Nickel, Cobalt, and Platinum-Group Metals (2011) [Google Scholar]
- Z. Zulhan, Laterite Nickel Ore Processing and Refining by Pyrometallurgy (2021) [Google Scholar]
- I. Ibrahimi, N. Deva, S. Mehmeti, Optimalization of the ferronickel production process through improving desulphurization effectiveness, Civ. Eng. J. (Iran), 6.5, 907-918 (2020) [CrossRef] [Google Scholar]
- Z. Zulhan, Hot metal de-S & LD-Converter / BOF (2021) [Google Scholar]
- F.N.H. Schrama, E.M. Beunder, B.V. Berg, Y. Yang, R. Boom, Sulphur removal in ironmaking and oxygen steelmaking, Ironmak. Steelmak., 44.5, 333-343 (2017) [Google Scholar]
- D.S. Kathait, Heat loss in Ladle furnace, Int. Res. J. Eng. Technol., 1627-1631 (2016) [Google Scholar]
- P.F. Paradis, T. Ishikawa, Y. Watanabe, J. Okada, Hybrid processing combining electrostatic levitation and laser heating: Application to terrestrial analogues of asteroid materials, Adv. Opt. Technol. (2011) [Google Scholar]
- H. Kobatake, J. Brillo, Density and viscosity of ternary Cr-Fe-Ni liquid alloys, J. Mater. Sci., 48.19, 6818-6824 (2019) [Google Scholar]
- K. Jin, H. Bei, Single-phase concentrated solid-solution alloys: Bridging intrinsic transport properties and irradiation resistance, Front. Mater. (2018) [Google Scholar]
- J. Orehotsky, K. Schröder, Specific heat of Nickel-Iron and Nickel-Cobalt alloys between 600 K and 1500 K, Phys. Condens. Matter. 17.1, 37-53 (1973) [Google Scholar]
- W. Ga̧sior, P. Fima, Z. Moser, Modeling of the thermodynamic properties of liquid Fe-Ni and Fe-Co alloys from the surface tension data, Arch. Metall. Mater., 56.1, 13-23 (2011) [CrossRef] [Google Scholar]
- Ansys, Ansys Fluent Theory Guide (2013) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.