EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 11009 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 11009
Number of page(s) 8
Section Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Soil Stabilisation and Improvement
DOI https://doi.org/10.1051/e3sconf/202454411009
Published online 02 July 2024
  1. Aminorroaya, S. E., A. Tohidi, J. Parsi, and B. Zamani. 2004. “Recycling of ladle furnace slags.” 2nd International Conference on Process Development in Iron and Steelmaking (SCANMET II), no.2: 379–384. [Google Scholar]
  2. AREMA. 2013. “Manual for Railway Engineering”, American Railway Engineering Maintenance-of-way Association, Vol. I to IV, Lanham. [Google Scholar]
  3. ASTM “D 5298–94 Standard test method for the measurement of soil potential (suction) using filter paper”, ASTM International, Annual Book of Standards, Vol. 04.09, West Conshohocken, PA, 1998. [Google Scholar]
  4. Astuto, G., F. Molina-Gómez, E. Bilotta, A. Viana da Fonseca, and A. Flora. 2022. “Some remarks on the assessment of Pwave velocity in laboratory tests for evaluating the degree of saturation.” Acta Geotechnica. https://doi.org/10.1007/s11440-022-01610-9 [Google Scholar]
  5. Chandler, R. J., M. S. Crilly, and G. Montgomery-Smith. 1992. “A low cost method of assessing clay desiccation for low rise buildings.” Proc. Institute of Civil Engineering 92, no.2: 82–89. https://doi.org/10.1680/icien.1992.18771 [Google Scholar]
  6. Cordeiro, D., F. Molina-Gómez, C. Ferreira, S. Rios, and A. Viana da Fonseca. 2022. “Cyclic Liquefaction Resistance of an Alluvial Natural Sand: A Comparison between Fully and Partially Saturated Conditions.” Geotechnics 2: 1–13. https://doi.org/10.3390/geotechnics2010001 [CrossRef] [Google Scholar]
  7. Ferreira, C., S. Rios, N. Cristelo, and A. Viana da Fonseca. 2021. “Evolution of the optimum ultrasonic testing frequency of alkali-activated soil-ash.” Géotechnique Letters 11, no.3: 158–163. https://doi.org/10.1680/jgele.21.00041 [CrossRef] [Google Scholar]
  8. Geyer, R. M. “Estudo sobre a Potencialidade de Uso das Escórias de Aciaria como Adição ao Concreto”, Tese de Doutoramento, Universidade Federal do Rio Grande do Sul, 2001. [Google Scholar]
  9. Gu, X., K. Zuo, A. Tessari, and G. Gao. 2021. “Effect of saturation on the characteristics of P-wave and S-wave propagation in nearly saturated soils using bender elements.” Soil Dynamics and Earthquake Engineering 145: 106742. https://doi.org/10.1016/j.soildyn.2021.106742 [CrossRef] [Google Scholar]
  10. Hatanaka, M., and T. Masuda. 2008. “Experimental study on the relationship between degree of saturation and P-wave velocity in sandy soils.” Geotechnical engineering for disaster mitigation and rehabilitation. Springer, Berlin, pp 346–351. https://doi.org/10.1007/978-3-540-79846-0_36 [Google Scholar]
  11. Ishihara, K., H. Tsuchiya, Y. Huang, and K. Kamada. 2001. “Recent studies on liquefaction studied on sand - effect of saturation.” Proc. 4th Int. Conf. Recent. Adv. Geotech. Earthq. Eng. Soil. Dyn. 1–7. [Google Scholar]
  12. Ishihara, K., Y. Huang, and H. Tsuchiya. 1998. “Liquefaction resistance of nearly saturated sand as correlated with longitudinal wave velocity.” Poromechanics. CRC Press, Florida, pp 583–586. [Google Scholar]
  13. Kambole, C., P. Paige-Green, W. K. Kupolati, J. M. Ndambuki, and A. O. Adeboje. 2017. “Basic oxygen furnace slag for road pavements: A review of material characteristics and performance for effective utilization in southern Africa.” Construction and Building Materials 148: 618–631. http://dx.doi.org/10.1016/j.conbuildmat.2017.05.036 [CrossRef] [Google Scholar]
  14. Kokusho, T. 2000. “Correlation of pore-pressure B-value with P-wave velocity and Poisson’s ratio for imperfectly saturated sand or gravel.” Soils Foundations 40: 95–102. https://doi.org/10.3208/sandf.40.4_95 [CrossRef] [Google Scholar]
  15. Kumar, J., and B. N. Madhusudhan. 2012. “Dynamic properties of sand from dry to fully saturated states.” Géotechnique 62: 45–54. https://doi.org/10.1680/geot.10.P.042 [CrossRef] [Google Scholar]
  16. Marinho, F., and O. Oliveira. 2006. “The filter paper method revisited.” Geotechnical Testing Journal 29, no. 3: 250–258. DOI:10.1520/GTJ14125 [CrossRef] [Google Scholar]
  17. Nishio, S. 1987. “Effect of saturation on elastic wave velocities of sand and gravel.” Proc. Recent. Adv. Study Engrg. Prop. Unsaturated Soil, JGS 221–224. [Google Scholar]
  18. NTG. 2015. “SSR Standard Specification for Roadworks.” Department of Infrastructure. Northern Territory Government. Australian Department of Infrastructure. ISSN 2204–8936. http://www.nt.gov.au/infrastructure/techspecs/index.shtml [Google Scholar]
  19. Rios, S., C. Cristelo, A. Viana da Fonseca, and C. Ferreira. 2017. “Stiffness Behavior of Soil Stabilized with Alkali-Activated Fly Ash from Small to Large Strains.” International Journal of Geomechanics 17, no. 3: 1–12. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000783 [CrossRef] [Google Scholar]
  20. Skempton, A. W. 1954. “The Pore-Pressure Coefficients A and B.” Géotechnique 4, no.4: 143–147. https://doi.org/10.1680/geot.1954.4.4.143 [CrossRef] [Google Scholar]
  21. Valle-Molina, C. and K. H. Stokoe, 2012. “Seismic measurements in sand specimens with varying degrees of saturation using piezoelectric transducers.” Canadian Geotechnical Journal 49, no.6: 671–685. https://doi.org/10.1139/t2012-033 [CrossRef] [Google Scholar]
  22. Varanasi, S. S., V. M. R. More, M. B. V. Rao, S. R. Alli, A. K. Tangudu, and D. Santanu. 2019. “Recycling Ladle Furnace Slag as Flux in Steelmaking: A Review.” Journal of Sustainable Metallurgy 5, no.4: 449–462. https://doi.org/10.1007/s40831-019-00243-9 [CrossRef] [Google Scholar]
  23. Viana da Fonseca, A., C. Ferreira, and M. Fahey. 2009. “A Framework Interpreting Bender Element Tests, Combining Time-Domain and Frequency-Domain Methods.” Geotechnical Testing Journal 32, no.2. DOI:10.1520/GTJ100974 [CrossRef] [Google Scholar]
  24. Yang, J. 2002. “Liquefaction resistance of sand in relation to Pwave velocity.” Géotechnique 52, no.4: 295–298. https://doi.org/10.1680/geot.2002.52.4.295 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.