EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 14005 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 14005
Number of page(s) 6
Section Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Sensitive and Liquefiable Soils: Tailings and Other Highly Brittle Strain-Softening Soils
DOI https://doi.org/10.1051/e3sconf/202454414005
Published online 02 July 2024
  1. Ahangar-Asr, A., Faramarzi, A., Mottaghifard, N., Javadi, A. A. “Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression”. Computers & Geosciences, 37(11), pp. 1860-1869, 2011. https://doi.org/10.1016/j.cageo.2011.04.015. [CrossRef] [Google Scholar]
  2. ASTM Committee D-18 on Soil and Rock. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 Ft-lbf/ft3 (600 KN-m/m3)) 1. ASTM international, 2021. [Google Scholar]
  3. ASTM Committee D-18 on Soil and Rock. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 Ft-lbf/ft3 (2,700 KNm/ m3)) 1. ASTM International, 2021 [Google Scholar]
  4. Bandini, P., and Sathiskumar, S. “Effects of silt content and void ratio on the saturated hydraulic conductivity and compressibility of sand-silt mixtures”. Journal of Geotechnical and Geoenvironmental Engineering, 135(12), pp. 1976-1980, 2009. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000177. [CrossRef] [Google Scholar]
  5. Carrera, A., Coop, M., Lancellotta, R. “Influence of grading on the mechanical behaviour of Stava tailings”. Geotechnique, 61(11), pp. 935–946, 2011. https://doi.org/10.1680/geot.9.P.009. [CrossRef] [Google Scholar]
  6. Consoli, N. C., Casagrande, M. D., Coop, M. R. “Effect of fiber reinforcement on the isotropic compression behavior of a sand”. Journal of Geotechnical and Geoenvironmental Engineering, 131(11), pp. 1434–1436. 2005. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:11(1434). [CrossRef] [Google Scholar]
  7. Consoli, N.C., Vogt, J.C., Silva, J.P.S.; Chaves, H.M., Scheuermann Filho, H.C., Moreira, E.B., Lotero, A. “Behaviour of compacted filtered iron ore tailings–Portland cement blends: new brazilian trend for tailings disposal by stacking. Appl. Sci. 12, pp. 836. 2022, https://doi.org/10.3390/app12020836. [CrossRef] [Google Scholar]
  8. Coop, M. R., Lee, I. K. “The behaviour of granular soils at elevated stresses”, In: Predictive soil mechanics: Proceedings of the Wroth Memorial Symposium held at St Catherine’s College, Thomas Telford, London, pp. 186–198, 1993. [Google Scholar]
  9. Dafalla, M., Shaker, A.A., Elkady, T. et al. “Effects of confining pressure and effective stress on hydraulic conductivity of sand-clay mixtures”, Arab J Geosci 8, 9993–10001 (2015). https://doi.org/10.1007/s12517-015-1925-1. [CrossRef] [Google Scholar]
  10. Dienstmann, G., Schnaid, F., Maghous, S., DeJong, J. “Piezocone penetration rate effects in transient gold tailings”, Journal of Geotechnical and Geoenvironmental Engineering, 144(2), pp. 04017116, 2018. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001822. [CrossRef] [Google Scholar]
  11. Dos Santos, R. A., Esquivel, E. R. “Saturated anisotropic hydraulic conductivity of a compacted lateritic soil”, Journal of Rock Mechanics and Geotechnical Engineering, 10(5), pp. 986–991. 2018. https://doi.org/10.1016/j.jrmge.2018.04.005. [CrossRef] [Google Scholar]
  12. Fan, J., Rowe, R. K., Brachman, R. W. “Compressibility and permeability of sand–silt tailings mixtures”, Canadian Geotechnical Journal, 59(8), pp. 1348–1357, 2022, https://doi.org/10.1139/cgj-2021-0356. [CrossRef] [Google Scholar]
  13. Gan, D., Yang, X., Zhang, Y. “Permeability Prediction of Iron Tailings Including Degree of Compaction and Structure”, Complexity, 2019. https://doi.org/10.1155/2019/3591628. [Google Scholar]
  14. Gobbi, S., Reiffsteck, P., Lenti, L. et al. “Liquefaction triggering in silty sands: effects of non-plastic fines and mixture-packing conditions”, Acta Geotech. 17, pp. 391–410, 2022. https://doi.org/10.1007/s11440-021-01262-1. [CrossRef] [Google Scholar]
  15. Ishihara, K., Harada, K., Lee, W. F., Chan, C. C., Safiullah, A. M. M. “Post-liquefaction settlement analyses based on the volume change characteristics of undisturbed and reconstituted samples”, Soils and Foundations, 56(3), pp. 533–546, 2016. https://doi.org/10.1016/j.sandf.2016.04.019. [CrossRef] [Google Scholar]
  16. Jefferies, M.; Been, K. “Soil Liquefaction: A Critical State Approach”, 2nd ed.; Taylor & Francis; CRC Press: London, UK, 2015. [Google Scholar]
  17. JGS-0161. Test method for minimum and maximum densities of sands, Standards of the Japanese Geotechnical Society, 2009. [Google Scholar]
  18. Kossoff, D., Dubbin, W. E., Alfredsson, M., Edwards, S. J., Macklin, M. G., Hudson-Edwards, K. A. “Mine tailings dams: characteristics, failure, environmental impacts, and remediation”, Appl. Geochem. 51, pp. 229–245, 2014. https://doi.org/10.1016/j.apgeochem.2014.09.010 [Google Scholar]
  19. Li, W., Coop, M. R., Senetakis, K., Schnaid, F. “The mechanics of a silt-sized gold tailing”. Engineering Geology, 241, pp. 97–108, 2018. https://doi.org/10.1016/j.enggeo.2018.05.014. [CrossRef] [Google Scholar]
  20. Mayne, P. W., Coop, M. R., Springman, S. M., Huang, A. B., Zornberg, J. G. “Geomaterial behavior and testing”, In Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, Alexandria, Egypt, 2009, pp. 2777–2872. [Google Scholar]
  21. Mijic, Z., Bray, J. D., Riemer, M. F., Cubrinovski, M., Rees, S. D. “Test method for minimum and maximum densities of small quantities of soil”, Soils and Foundations, 61(2), pp. 533–540, 2021. https://doi.org/10.1016/j.sandf.2020.12.003. [CrossRef] [Google Scholar]
  22. Mitchell, J. K., Soga, K. Fundamentals of Soil Behavior. New York: John Wiley & Sons; 2005. [Google Scholar]
  23. Numata, A., Someya, N., Tazoh and Kokusho, T. “Proposal of Definition of Minimum Void Ratio for Fine Soils”, In: Proc. 11th Japanese Earthquake Engineering Symposium, pp. 665–670. 2002. [Google Scholar]
  24. Oldecop, L. A., Rodari, G. J. “Unsaturated mine tailings disposal”, Soils and Rocks, 44, 2021. https://doi.org/10.28927/SR.2021.067421. [Google Scholar]
  25. Shafiee, A. Permeability of compacted granule–clay mixtures. Engineering Geology, 97, 199–208, 2008. [Google Scholar]
  26. Shipton, B., Coop, M. R. “Transitional behaviour in sands with plastic and non-plastic fines”. Soils Found. 55 (1), pp. 1–16, 2015, https://doi.org/10.1016/sandf.2014.12.001. [CrossRef] [Google Scholar]
  27. Skempton, A.W. “The Pore-Pressure Coefficients A and B”, Geotechnique, 4, pp. 143–147, 1954. [CrossRef] [Google Scholar]
  28. Thevanayagam, S., Shenthan, T., Mohan, S., Liang, J. “Undrained fragility of clean sands, silty sands, and sandy silts”, Journal of Geotechnical and Geoenvironmental Engineering, 128(10), pp. 849–859, 2002. [CrossRef] [Google Scholar]
  29. Torres-Cruz, L. A., Santamarina. J.C. “The critical state line of non-plastic tailings”, Canadian Geotechnical Journal, 57(10), 2019. https://doi.org/10.1139/cgj-2019-0019. [Google Scholar]
  30. Viana da Fonseca, A., Cordeiro, D., Molina-Gomez, F. “Recommended procedures to assess critical state locus from triaxial tests in cohesionless remoulded samples”, Geotechnics, 1(1), pp. 95–127, 2021. https://doi.org/10.3390/geotechnics1010006. [CrossRef] [Google Scholar]
  31. Wang, J. J., Zhang, H. P., Liu, M. W., Chen, Y. Y. “Seismic passive earth pressure with seepage for cohesionless soil”, Marine Georesources & Geotechnology, 30(1), pp. 86–101, 2012. https://doi.org/10.1080/1064119X.2011.586012. [CrossRef] [Google Scholar]
  32. Yang, Y. H., Wei, Z. A., Yin, G. Z., Wang, J. G., Wang, W. S., Chen, Y. L. “Uniaxial compression test of frozen tailings”, J Cold Reg Sci Technol, 129, pp. 60–68, 2016. https://doi.org/10.1016/j.coldregions.2016.06.007. [CrossRef] [Google Scholar]
  33. Zlatovic´, S., Ishihara, K. “On the influence of non-plastic fines on residual strength”, In: Proceedings of the 1st International Conference on Earthquake Geotechnical Engineering, Tokyo, Japan. AA Balkema, Rotterdam, the Netherlands, pp. 239–244. 1995. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.