EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 547 (2024) E3S Web of Conf., 547 (2024) 03026 References
Open Access
Issue
E3S Web of Conf.
Volume 547, 2024
International Conference on Sustainable Green Energy Technologies (ICSGET 2024)
Article Number 03026
Number of page(s) 8
Section Energy
DOI https://doi.org/10.1051/e3sconf/202454703026
Published online 09 July 2024
  1. Chauhan, R., Thakur, N.S.: Investigation of the thermohydraulic performance of impinging jet solar air heater. Energy. 68, 255–261 (2014). https://doi.org/10.1016/j.energy.2014.02.059 [CrossRef] [Google Scholar]
  2. Aboghrara, A.M., Baharudin, B.T.H.T., Alghoul, M.A., Adam, N.M., Hairuddin, A.A., Hasan, H.A.: Performance analysis of solar air heater with jet impingement on corrugated absorber plate. Case Studies in Thermal Engineering. 10, 111–120 (2017). https://doi.org/10.1016/j.csite.2017.04.002 [Google Scholar]
  3. Das, S., Biswas, A., Das, B.: Parametric investigation on the thermo-hydraulic performance of a novel solar air heater design with conical protruded nozzle jet impingement. Appl Therm Eng. 219, 119583 (2023). https://doi.org/10.1016/j.applthermaleng.2022.119583 [Google Scholar]
  4. Alomar, O.R., Abd, H.M., Mohamed Salih, M.M.: Efficiency enhancement of solar air heater collector by modifying jet impingement with v-corrugated absorber plate. J Energy Storage. 55, 105535 (2022). https://doi.org/10.1016/j.est.2022.105535 [CrossRef] [Google Scholar]
  5. Yadav, S., Saini, R.P., Pandey, K.M.: Effect of jet angle and jet pitch on the Thermo-Hydraulic performance of solar air heater having absorber plate with jet impingement. Thermal Science and Engineering Progress. 45, 102146 (2023). https://doi.org/10.1016/j.tsep.2023.102146 [CrossRef] [Google Scholar]
  6. Singh, S., Chaurasiya, S.K., Negi, B.S., Chander, S., Nemś, M., Negi, S.: Utilizing circular jet impingement to enhance thermal performance of solar air heater. Renew Energy. 154, 1327–1345 (2020). https://doi.org/10.1016/j.renene.2020.03.095 [CrossRef] [Google Scholar]
  7. Mund, C., Kumar Rathore, S., Kumar Sahoo, R.: Experimental study of heat transfer and frictional characteristics of impinging jet solar air heater with wire-mesh attached to the absorber plate. Thermal Science and Engineering Progress. 46, 102214 (2023). https://doi.org/10.1016/j.tsep.2023.102214 [CrossRef] [Google Scholar]
  8. Moshery, R., Chai, T.Y., Sopian, K., Fudholi, A., Al-Waeli, A.H.A.: Thermal performance of jet-impingement solar air heater with transverse ribs absorber plate. Solar Energy. 214, 355–366 (2021). https://doi.org/10.1016/j.solener.2020.11.059 [CrossRef] [Google Scholar]
  9. Çerçi, K.N., Saydam, D.B., Hürdoğan, E., Ozalp, C.: Experimental investigation and artificial neural networks (ANNs) based prediction of thermal performance of solar air heaters with different surface geometry. Solar Energy. 273, 112499 (2024). https://doi.org/10.1016/j.solener.2024.112499 [CrossRef] [Google Scholar]
  10. Salih, H.M.: A comparative study for double pass solar air collector utilizing medial glass panel. Archive of Mechanical Engineering. 729–747 (2022). https://doi.org/10.24425/ame.2022.141524 [Google Scholar]
  11. Agarwal, A., Seretse, O.M., Letsatsi, M.T., Dintwa, E.: Review of Energy Status and Associated Conservational Issues in Botswana. MATEC Web of Conferences. (2018). https://doi.org/10.1051/matecconf/201817206003 [Google Scholar]
  12. Agarwal, A., Seretse, O.M., Letsatsi, M.T., Maele, L.T., Koketso, D.: Performance evolution of an improved solar thermal hot air heating system for drying ground-nuts. Journal of Mechanical Engineering Research and Developments. 42, (2019). https://doi.org/10.26480/jmerd.03.2019.01.05 [Google Scholar]
  13. Seretse, O.M., Agarwal, A., Letsatsi, M.T., Moloko, O.M., Batlhalefi, M.S.: Design, Modelling and Experimental Investigation of an Economic Domestic STHW System Using T*Sol® Simulation in Botswana. MATEC Web of Conferences. p. 06004 (2018). https://doi.org/10.1051/matecconf/201817206004 [Google Scholar]
  14. Obusitswe Makgotla Seretse, Abhishek Agarwal, Letsatsi Matlhogonolo, Olefile Molwane, Pitso Isaac, Seeletso Ramosesane, Bonno Kgomo: “Thermodynamic performance evolution of an inexpensive prototype solar collector for 1 kw domestic STHW heating system in Botswana.” Integrative Omics and Applied Biotechnology (IIOAB) Journal. 10, 1–8 (2019). [Google Scholar]
  15. Agarwal, A., Mishra, S.N., Vashishtha, V.K.: “Solar Tilt Measurement of Array for Building Application and Error Analysis.” International Journal of Renewable Energy Research. 2 (2022). https://doi.org/10.20508/ijrer.v2i4.291.g6088 [Google Scholar]
  16. Dong, Z., Du, Q., Liu, P., Liu, Z., Liu, W.: “A numerical investigation and irreversibility optimization of constantly grooved solar air heaters.” Renew Energy. 207, 629–646 (2023). https://doi.org/10.1016/j.renene.2023.03.055 [CrossRef] [Google Scholar]
  17. Fattoum, R., Hidouri, A., El Hadi Attia, M., Arıcı, M., Ammar Abbassi, M.: “Optimization of solar air heaters performance using parallel porous wire mesh: energy, exergy, and enviro-economic analyses.” Thermal Science and Engineering Progress. 102385 (2024). https://doi.org/10.1016/j.tsep.2024.102385 [Google Scholar]
  18. Maarof, H.A., Madadi Avargani, V., Maree, I.E., Yaseen, A.H.: “CFD modeling of a tubular three-pass solar air heater with phase change material: Investigating heat transfer enhancement and energy efficiency.” J Energy Storage. 87, 111522 (2024). https://doi.org/10.1016/j.est.2024.111522 [CrossRef] [Google Scholar]
  19. Rehman, T., Nguyen, D.D., Sajawal, M.: “Smart optimization and investigation of a PCMs-filled helical finned-tubes double-pass solar air heater: An experimental data-driven deep learning approach.” Thermal Science and Engineering Progress. 49, 102433 (2024). https://doi.org/10.1016/j.tsep.2024.102433 [CrossRef] [Google Scholar]
  20. Fernández-Parra, R., Sánchez-Matás, C., López-Villalobos, J.L., Malvè, M.: “Computational Modeling of aerosol particle transport and deposition in the healthy and stented human airways considering different breathing conditions and particle sizes.” In: Digital Human Modeling and Medicine. pp. 227–251. Elsevier (2023). https://doi.org/10.1016/B978-0-12-823913-1.00006-3 [CrossRef] [Google Scholar]
  21. Ullah, A., Amanat, A., Imran, M., Gillani, S.S.J., Kilic, M., Khan, A.: “Effect of turbulence modeling on hydrodynamics of a turbulent contact absorber.” Chemical Engineering and Processing - Process Intensification. 156, 108101 (2020). https://doi.org/10.1016/j.cep.2020.108101 [CrossRef] [Google Scholar]
  22. Agarwal, A., Mthembu, L.: “CFD analysis of conical diffuser under swirl flow inlet conditions using turbulence models.” Mater Today Proc. 27, 1350–1355 (2020). https://doi.org/10.1016/j.matpr.2020.02.621 [CrossRef] [Google Scholar]
  23. Chávez-Bermúdez, I.A., Rodríguez-Muñoz, N.A., Venegas-Reyes, E., Valenzuela, L., Ortega-Avila, N.: “Thermal Performance Analysis of a Double-Pass Solar Air Collector: A CFD Approach.” Applied Sciences. 12, 12199 (2022). https://doi.org/10.3390/app122312199 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.