Open Access
| Issue |
E3S Web Conf.
Volume 551, 2024
International Conference on Electronics, Engineering Physics and Earth Science (EEPES 2024)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 12 | |
| Section | Energy Efficiency and Applied Thermodynamics | |
| DOI | https://doi.org/10.1051/e3sconf/202455101001 | |
| Published online | 17 July 2024 | |
- R. Ebara, F. Tanaka, M. Kawasaki, Sulfuric acid dew point corrosion in waste heat boiler tube for copper smelting furnace, Eng. Fail. Anal. 33 (2013), 29-36. https://doi.org/10.1016/j.engfailanal.2013.04.00. [CrossRef] [Google Scholar]
- Y. Kawahara, High temperature corrosion mechanisms and alloying elements for materials used in waste incineration environment, Corros. Sci. 44 (2002), 223-245. https://doi.org/10.1016/S0010-938X(01)00058-. [CrossRef] [Google Scholar]
- J.M. Blanco, F. Pena, Increase in the boiler's performance in terms of the acid dew point temperature: Environmental advantages of replacing fuels, Appl. Therm. Eng. 28, 7 (2008), pp. 777-784. https://doi.org/10.1016/j.applthermaleng.2007.06.02. [CrossRef] [Google Scholar]
- S. Kumar, P. Tadge, A. Mondal, N. Hussain, S. Ray, A. Saha, Boiler tube failures in thermal power plant: Two case studies, Mater. Today-Proc., 66 (9) (2022) pp. 3847-3852. https://doi.org/10.1016/j.matpr.2022.06.25. [CrossRef] [Google Scholar]
- A. Marx, D. Hülsbruch, A. Müller, B. Epple, F. Ewert, J. Peitan, Online corrosion monitoring in industrial boilers, Therm. Sci. Eng. Prog. 43 (2023) 102009. https://doi.org/10.1016/j.tsep.2023.10200. [CrossRef] [Google Scholar]
- K. Węglarz, D. Taler, J. Taler, M. Marcinkowski, General numerical method for hydraulic and thermal modelling of the steam superheaters, Energy 291 (2024), 130371. https://doi.org/10.1016/j.energy.2024.13037. [CrossRef] [Google Scholar]
- L. Yin, H. Zhou, Modal decomposition integrated model for ultra-supercritical coalfired power plant reheater tube temperature multi-step prediction, Energy 292 (2024) 130521. https://doi.org/10.1016/j.energy.2024.13052. [CrossRef] [Google Scholar]
- N. Modliński, K. Szczepanek, D. Nabagło, P. Madejski, Z. Modliński, Mathematical procedure for predicting tube metal temperature in the second stage reheater of the operating flexibly steam boiler, Appl. Therm. Eng. 146 (2019) pp. 854-865. https://doi.org/10.1016/j.applthermaleng.2018.10.06. [CrossRef] [Google Scholar]
- S. Chantasiriwan, Optimum installation of economizer, air heater, and flue gas dryer in biomass boiler, Comput. Chem. Eng., 150 (2021) 107328. https://doi.org/10.1016/j.compchemeng.2021.10732. [CrossRef] [Google Scholar]
- D. Taler, Numerical Modelling and Experimental Testing of Heat Exchangers, Springer, Cham (2018) [Google Scholar]
- ANSYS, Inc. ANSYS Fluent User’s Guide, Release 20.2. (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.