Open Access
| Issue |
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/202455201018 | |
| Published online | 23 July 2024 | |
- O. Keles, C.W. Blevins, & K.J. Bowman, “Effect of build orientation on the mechanical reliability of 3D printed ABS,” Rapid Prototyping Journal, Vol. 23, No.2, pp. 320-328, 2017. [CrossRef] [Google Scholar]
- Dale Prince J (2014) 3D printing: an industrial revolution. J Electron Resources Med Libr 11(1):39-45 [CrossRef] [Google Scholar]
- Tofail SAM., Koumoulos E.P., Bandyopadhyay A., Bose S., O’Donoghue L., Charitidis C. (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21:22-37 [CrossRef] [Google Scholar]
- Singh T., Kumar S., Sehgal S. (2020) 3D printing of engineering materials:a state of the art review. Mater Today: Proc 28:1927-1931 [CrossRef] [Google Scholar]
- Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F. and Levy, G.N., 2017. Laser based additive manufacturing in industry and academia. Cirp Annals, 66(2), pp. 561-583. [CrossRef] [Google Scholar]
- Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B. and Martina, F., 2016. Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP annals, 65(2), pp. 737-760. [CrossRef] [Google Scholar]
- Ahlers, D., Wasserfall, F., Hendrich, N. and Zhang, J., 2019, August. 3D printing of nonplanar layers for smooth surface generation. In 2019 IEEE 15th international conference on automation science and engineering (CASE) (pp. 1737-1743). IEEE. [CrossRef] [Google Scholar]
- Petersen E.E., Kidd R.W., Pearce J.M. Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market. Technologies. 2017; 5(3):45. [CrossRef] [Google Scholar]
- Feixiang, Z., Liyong, Z., & Xia, K. (2016). Study of impact of 3D printing technology and development on creative industry. Journal of social science studies, 3(2), 57. [CrossRef] [Google Scholar]
- Ali, M.H., Batai, S. and Sarbassov, D. (2019), "3D printing: a critical review of current development and future prospects", Rapid Prototyping Journal, Vol. 25 No. 6, pp. 1108-1126. [CrossRef] [Google Scholar]
- Rahim T.N., Abdullah A.M., Akil H. (2019) Recent developments in fused deposition modeling-based 3D printing of polymers and their composites. Polym Rev 59(4):589-624 [CrossRef] [Google Scholar]
- Dudek, P.F.D.M., FDM 3D printing technology in manufacturing composite elements. Archives of metallurgy and materials, 58(4), 2013, 1415-1418. [CrossRef] [Google Scholar]
- Mercado-Colmenero J.M., La Rubia M.D., Mata-Garcia E., Rodriguez-Santiago M., Martin-Donate C. (2020) Experimental and numerical analysis for the mechanical characterization of PETG polymers manufactured with FDM technology under pure uniaxial compression stress states for architectural applications. Polymers 12(10):2202 [CrossRef] [PubMed] [Google Scholar]
- Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F. and Levy, G.N., 2017. Laser based additive manufacturing in industry and academia. Cirp Annals, 66(2), pp. 561-583. [CrossRef] [Google Scholar]
- Li Ge, Zhao M., Fei Xu, Yang Bo, Li X., Meng X., Teng L., Sun F., Li Y. (2020) Synthesis and biological application of polylactic acid, molecule. Molecules 25:5023 [CrossRef] [PubMed] [Google Scholar]
- Kamelian F.S., Saljoughi E., P. ShojaeeNasirabadi, and S. M Mousavi, (2018) Modifications and research potentials of acrylonitrile/butadiene/styrene (ABS) membranes: a review. Polym Compos 39:2835-2846 [CrossRef] [Google Scholar]
- A.M.T. Syed, P.K. Elias, B. Amit, B. Susmita, O. Lisa, & C. Charitidis, “Additive manufacturing: scientific and technological challenges, market uptake and opportunities,” Materials today, Vol. 1, pp. 1–16, 2017. [CrossRef] [Google Scholar]
- Miazio, L. (2019) Impact of print speed on strength of samples printed in FDM technology. AgricEng 23(2):33-38 [Google Scholar]
- Hsueh M., Lai C., Wang S., Zeng Y., Hsieh C., Pan C., Huang W. (2021) Effect of printing parameters on the thermal and mechanical properties of 3D-printed PLA and PETG, using fused deposition modelling. Polymers 13(11):1758 [CrossRef] [PubMed] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.