EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01033 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01033
Number of page(s) 12
DOI https://doi.org/10.1051/e3sconf/202455201033
Published online 23 July 2024
  1. Jadhav M.R., Dabade U.A. (2016) Multi-Objective Optimization in Hot Machining of Al/SiCp Metal Matrix Composites. In: IOP Conference Series: Materials Science and Engineering [Google Scholar]
  2. Shukla M., Dhakad S.K. (2018) Optimisation of electrical discharge machining of Al-LM-6/SiC/B4C composite: A grey relational approach. In: Materials Today: Proceedings. pp 19147-19155 [CrossRef] [Google Scholar]
  3. Maniyar K.G., Ingole D.S. (2018) Multi response optimization of EDM process parameters for aluminium hybrid composites by GRA. In: Materials Today: Proceedings. pp 19836-19843 [CrossRef] [Google Scholar]
  4. Kumar Sahu K., Ballav R. (2017) Optimization of machining parameters of Aluminium based hybrid composites using Gray Relation Analysis. In: Materials Today: Proceedings. pp 9977-9981 [CrossRef] [Google Scholar]
  5. Pandey G.K., Yadav SKS (2019) Multi-objective optimization of vibration assisted electrical discharge drilling process using PCA based GRA method. In: Materials Today: Proceedings. pp 2906-2915 [Google Scholar]
  6. Shunmugesh K., Panneerselvam K. (2017) Grey Relational Analysis Based Optimization of Multiple Responses in Drilling of Carbon Fiber-Epoxy Composites. In: Materials Today: Proceedings. pp 2861-2870 [CrossRef] [Google Scholar]
  7. Vinoth Babu K., Marichamy S., Ganesan P., et al (2020) Processing of functionally graded aluminum composite brake disc and machining parameters optimization. In: Materials Today: Proceedings. pp 563-567 [CrossRef] [Google Scholar]
  8. Kumar P., Yadav SKS (2019) Multi-objective optimization of electrical discharge drilling (EDD) process using PCA based grey relational analysis. In: Materials Today: Proceedings. pp 2013-2020 [Google Scholar]
  9. Pritam A., Dash R.R., Mallik R.K., Parida A.K. (2018) Optimisation of hole characteristics in pulsed Nd: YAG laser micro-drilling of AISI 304 stainless steel by Taguchi method. In: IOP Conference Series: Materials Science and Engineering [Google Scholar]
  10. Pandey G.K., Yadav SKS (2019) Multi-Response Optimization of Vibration Assisted Electrical Discharge Drilling Process using PCA based GRA approach. In: Materials Today: Proceedings. pp 2906-2915 [Google Scholar]
  11. Sasikumar C., Kanna P.G., Sundaresan R., Ramakrishnan A. (2021) Experimental analysis of Al-AlN-B4C hybrid composite material for automobile disk brake. In: Materials Today: Proceedings. pp 3674-3677 [Google Scholar]
  12. Meignanamoorthy M., Ravichandran M., Alagarsamy S V., et al (2020) Effect of various reinforcements on properties of metal matrix composites: A review. In: Materials Today: Proceedings. pp 1118-1121 [CrossRef] [Google Scholar]
  13. Tamilarasan M., Vivekananthan M., Kumar KSS., Saravanakumar M. (2020) Optimization of process parameters of electrical discharge machining of fabricated AA6082-ALN. In: Materials Today: Proceedings. pp 3725-3730 [Google Scholar]
  14. Bhaskar S., Kumar M., Patnaik A. (2019) Tribological characteristics of hybrid AA2024 alloy composite reinforced with AlN and Gr particulates. In: Materials Today: Proceedings. pp 709-715 [Google Scholar]
  15. Wahab M.N., Ghazali M.J., Daud A.R. (2011) Effect of aging treatment on microstructure and mechanical properties of Al-Si matrix alloy reinforced with high purity aluminum nitride (AlN). In: Key Engineering Materials. pp 967-971 [CrossRef] [Google Scholar]
  16. Mohanavel V., Suresh Kumar S., Sathish T., et al (2018) Microstructure and mechanical properties of hard ceramic particulate reinforced AA7075 alloy composites via liquid metallurgy route. In: Materials Today: Proceedings. pp 26860-26865 [CrossRef] [Google Scholar]
  17. Wahab M.N., Ghazali M.J., Daud A.R. (2011) Effect of Aluminum Nitride (AlN) addition on wear and mechanical properties of Al-Si alloy composites fabricated by stir casting process. In: Key Engineering Materials. pp 307-312 [CrossRef] [Google Scholar]
  18. Arias J., Benedetti A., Cabeza M., et al (2010) Surface modification of 2017-T4 aluminium alloy by high power diode laser melting. In: Surface and Interface Analysis. pp 748-751 [CrossRef] [Google Scholar]
  19. Sekar K., Vasanthakumar P. (2019) Mechanical properties of Al-Cu alloy metal matrix composite reinforced with B4C, Graphite and Wear Rate Modeling by Taguchi Method. In: Materials Today: Proceedings. pp 3150-3159 [CrossRef] [Google Scholar]
  20. Giuliano G. (2017) Gas blow forming in AA2017 aluminium alloy. In: Materials Science Forum. pp 13-17 [Google Scholar]
  21. Härtel M., Wagner S., Frint P., Wagner M.-X. (2014) Effects of particle reinforcement and ECAP on the precipitation kinetics of an Al-Cu alloy. In: IOP Conference Series: Materials Science and Engineering [Google Scholar]
  22. Abreu C.M., Cabeza M., Feijoo I. (2016) Study of surface corrosion on AA 2017-T4 aluminum alloy by using electrochemical parameters. In: Surface and Interface Analysis. pp 676-679 [CrossRef] [Google Scholar]
  23. Weis S., Wielage B., Hoyer I., Siebeck S. (2011) Joining of powder-metallurgically produced AA2017/(Al2O 3)p composite by resistance brazing. In: Advances in Powder Metallurgy and Particulate Materials-2011, Proceedings of the 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011. pp 636-641 [Google Scholar]
  24. Ahmed MMZ., Wynne B.P. (2012) Post weld heat treatment of friction stir welded AA2017. In: TMS Light Metals. pp 509-513 [Google Scholar]
  25. Azhagar A., Hayakawa K., Shizuka H., Sakai K. (2022) Influence of Tool Pin Profiles in Friction Stir Welding of Aluminum Alloy and Polycarbonate. In: Defect and Diffusion Forum. pp 185-190 [CrossRef] [Google Scholar]
  26. Wagner S., Härtel M., Frint P., Wagner M.-X. (2017) Influence of ECAP temperature on the formability of a particle reinforced 2017 aluminum alloy. In: IOP Conference Series: Materials Science and Engineering [Google Scholar]
  27. Faltus J., Bendíková E., Siegl J. (2008) Fatigue properties of Al alloys AA2017, AA2007 and AA2015. In: 17th International Metallurgical and Materials Conference, METAL 2008-Proceedings [Google Scholar]
  28. Kousik Suraparaju Subbarama et al (2020) Optimization of Process Parameters in Drilling of Al6063 Reinforced with Magnesium Oxide Nano Particles: Advanced science and Engineering and Medicine. pp. 1303-1308(6) [Google Scholar]
  29. Hockauf M., Meyer L.W., Krüger L. (2008) Combining equal-channel angular extrusion (ECAE) and heat treatment for achieving high strength and moderate ductility in an Al-Cualloy. In: Materials Science Forum. pp 685-690 [CrossRef] [Google Scholar]
  30. Satishkumar P., Natarajan N., Saminathan R., et al (2022) Investigation of Mechanical and Tribological Properties of AA6061/MWCNT/B4C Hybrid Metal Matrix Composite. Adv Mater Sci Eng 2022:. https://doi.org/10.1155/2022/168416. [Google Scholar]
  31. Prasanth ISNVR, Jeevanandam P., Selvaraju P., et al (2023) Study of Friction and Wear Behavior of Graphene-Reinforced AA7075 Nanocomposites by Machine Learning. J Nanomater 2023:5723730. https://doi.org/10.1155/2023/572373. [Google Scholar]
  32. Ramesh B., Sathish Kumar S., Elsheikh A.H., et al (2022) Optimization and experimental analysis of drilling process parameters in radial drilling machine for glass fiber/nano granite particle reinforced epoxy composites. Mater Today Proc 62:835-840. https://doi.org/10.1016/j.matpr.2022.04.04. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.