EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01035 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01035
Number of page(s) 16
DOI https://doi.org/10.1051/e3sconf/202455201035
Published online 23 July 2024
  1. Bhaskar S., Kumar M., Patnaik A. (2019) Tribological characteristics of hybrid AA2024 alloy composite reinforced with AlN and Gr particulates. In: Materials Today: Proceedings. pp 709-715 [Google Scholar]
  2. Grewal J.S., Sidhu B.S., Prakash S. (2015) Wear behaviour of conventional and nanostructured thin films of titanium aluminium nitride. In: Proceedings of the International Thermal Spray Conference. pp 1199-1207 [Google Scholar]
  3. Mwema F.M., Akinlabi E.T., Oladijo O.P. (2019) A systematic review of magnetron sputtering of AlN thin films for extreme condition sensing. In: Materials Today: Proceedings. pp 1546-1550 [Google Scholar]
  4. Jasper S., Vijayakumar D., Stalin B., et al (2022) Experimental investigation of a multilayer nitride coating deposited on austenitic coating steel. In: Materials Today: Proceedings. pp 117-121 [Google Scholar]
  5. Sasikumar C., Kanna P.G., Sundaresan R., Ramakrishnan A. (2021) Experimental analysis of Al-AlN-B4C hybrid composite material for automobile disk brake. In: Materials Today: Proceedings. pp 3674-3677 [Google Scholar]
  6. Meignanamoorthy M., Ravichandran M., Alagarsamy S V., et al (2020) Effect of various reinforcements on properties of metal matrix composites: A review. In: Materials Today: Proceedings. pp 1118-1121 [CrossRef] [Google Scholar]
  7. Selvarajan L., Mouri P., Ramesh Raja R. (2018) Experimental Investigation of EDM Parameters on Machining Si3N4-TiN Conductive Ceramic Composite Using Hallow Tube Electrode for Improving Geometrical Accuracy. In: Materials Today: Proceedings. pp 8080-8088 [CrossRef] [Google Scholar]
  8. Wahab M.N., Ghazali M.J., Daud A.R. (2011) Effect of Aluminum Nitride (AlN) addition on wear and mechanical properties of Al-Si alloy composites fabricated by stir casting process. In: Key Engineering Materials. pp 307-312 [CrossRef] [Google Scholar]
  9. Singh M., Mishra P.K., Mohaty P.P., Singh R. (2021) Experimental Investigation of Tool Wear Rate (TWR) During the EDM of Hybrid Aluminum Metal Matrix Composite Reinforced with SiCp and Grp. In: Lecture Notes in Mechanical Engineering. pp 409-419 [Google Scholar]
  10. Abdulwahid R.A., Al-Ethari H., Al-Shaafaie S.H. (2018) Influence of mechanical mold vibration on EDM parameters of aluminum-alumina composite. In: International Conference on Advances in Sustainable Engineering and Applications, ICASEA 2018-Proceedings. pp 221-226 [Google Scholar]
  11. Sivasankara Raju R., Rao C.J., Sreeramulu D., Prasad K. (2020) Evaluation of Optimization Parametric Condition During Machining for Al-CSA Composite Using Response Surface Methodology. In: Lecture Notes in Mechanical Engineering. pp 469-476 [CrossRef] [Google Scholar]
  12. Gnanavelbabu A., Arunachalam V., Sunu Surendran K.T., et al (2021) Turning Process Characteristics of Aluminium Matrix Hybrid Composite Using Grey Relational Surface Methodology. In: Lecture Notes in Mechanical Engineering. pp 523-533 [CrossRef] [Google Scholar]
  13. Elsen S.R., Dhamodaran K., Aseer J.R. (2018) Multi-objective optimization of end milling process parameter for stir casted alumina reinforced aluminium metal matrix composite using RSM. In: IOP Conference Series: Materials Science and Engineering [Google Scholar]
  14. Arias J., Benedetti A., Cabeza M., et al (2010) Surface modification of 2017-T4 aluminium alloy by high power diode laser melting. In: Surface and Interface Analysis. pp 748-751 [CrossRef] [Google Scholar]
  15. Sekar K., Vasanthakumar P. (2019) Mechanical properties of Al-Cu alloy metal matrix composite reinforced with B4C, Graphite and Wear Rate Modeling by Taguchi Method. In: Materials Today: Proceedings. pp 3150-3159 [CrossRef] [Google Scholar]
  16. Abreu C.M., Cabeza M., Feijoo I. (2016) Study of surface corrosion on AA 2017-T4 aluminum alloy by using electrochemical parameters. In: Surface and Interface Analysis. pp 676-679 [CrossRef] [Google Scholar]
  17. Weis S., Wielage B., Hoyer I., Siebeck S. (2011) Joining of powder-metallurgically produced AA2017/(Al2O 3)p composite by resistance brazing. In: Advances in Powder Metallurgy and Particulate Materials-2011, Proceedings of the 2011 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2011. pp 636-641 [Google Scholar]
  18. Ahmed MMZ., Wynne B.P. (2012) Post weld heat treatment of friction stir welded AA2017. In: TMS Light Metals. pp 509-513 [Google Scholar]
  19. Azhagar A., Hayakawa K., Shizuka H., Sakai K. (2022) Influence of Tool Pin Profiles in Friction Stir Welding of Aluminum Alloy and Polycarbonate. In: Defect and Diffusion Forum. pp 185-190 [CrossRef] [Google Scholar]
  20. Wagner S., Härtel M., Frint P., Wagner M.-X. (2017) Influence of ECAP temperature on the formability of a particle reinforced 2017 aluminum alloy. In: IOP Conference Series: Materials Science and Engineering [Google Scholar]
  21. Faltus J., Bendíková E., Siegl J. (2008) Fatigue properties of Al alloys AA2017, AA2007 and AA2015. In: 17th International Metallurgical and Materials Conference, METAL 2008-Proceedings [Google Scholar]
  22. Hockauf M., Meyer L.W., Krüger L. (2008) Combining equal-channel angular extrusion (ECAE) and heat treatment for achieving high strength and moderate ductility in an Al-Cu alloy. In: Materials Science Forum. pp 685-690 [CrossRef] [Google Scholar]
  23. Satishkumar P., Mahesh G., Meenakshi R., Vijayan S.N. (2021) Tribological characteristics of powder metallurgy processed Cu-WC/SiC metal matrix composites. Mater Today Proc 37:459-465 [CrossRef] [Google Scholar]
  24. Prasanth ISNVR, Jeevanandam P., Selvaraju P., et al (2023) Study of Friction and Wear Behavior of Graphene-Reinforced AA7075 Nanocomposites by Machine Learning. J Nanomater 2023:5723730. https://doi.org/10.1155/2023/572373. [Google Scholar]
  25. Bothiraj T., Boopathi K., Kalaiselvan K., et al (2022) Experimental investigations on mechanical and wear behavior of waste marble dust and coconut fiber reinforced hybrid bio composites. Mater Today Proc 68:2239-2242. https://doi.org/10.1016/j.matpr.2022.08.44. [CrossRef] [Google Scholar]
  26. Satishkumar P., Infant Jegan Rakesh A.J., Meenakshi R., Saravana Murthi C. (2020) Characterization, mechanical and wear properties of Al6061/Sicp/fly ashp composites by stir casting technique. In: Materials Today: Proceedings. pp 2687-2694 [Google Scholar]
  27. Dinesh Kumar D., Balamurugan A., Suresh K.C., et al (2023) Study of Microstructure and Wear Resistance of AA5052/B4C Nanocomposites as a Function of Volume Fraction Reinforcement to Particle Size Ratio by ANN. J. Chem. 2023 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.