Open Access
| Issue |
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/202455201040 | |
| Published online | 23 July 2024 | |
- S. Suresh Kumar, V. Mohanavel, An overview assessment on magnesium metal matrix composites, Materials Today: Proceedings, Volume 59, Part 2, 2022, Pages 1357-1361, https://doi.org/10.1016/j.matpr.2021.12.015. [CrossRef] [Google Scholar]
- Bhaskar Chandra Kandpal A, Nitin Johri B, Lavish Kumar C, Anjul Tyagi A, Vaibhav Joshi A, Ujjwal Gupta A, Stir casting technology for magnesium-based metal matrix composites for bio-implants - a review, materials today proceedings, Volume 62, Part 6, 2022, Pages 4519-4525. [Google Scholar]
- Gurmeet Singh Arora, Kuldeep Kumar Saxena, Kahtan A. Mohammed, Chander Prakash, and Saurav Dixit, Manufacturing Techniques for Mg-Based Metal Matrix Composite with Different Reinforcements, Crystals 2022, 12, 945. [CrossRef] [Google Scholar]
- Anil Kumar, Santosh Kumar and N.K. Mukhopadhyay, Synthesis and Characterization of SiCp Reinforced Magnesium Alloy Based Metal Matrix Composite Through Vacuum Assisted Stir Casting Process, International Journal of Applied Engineering Research Volume 12, Number 24 (2017) pp. 16087-16093 [Google Scholar]
- Prahlad M Hadnoorkar1 R M Lathe, Wear Behavior of Magnesium Alloy AZ61 Reinforced With Sic and Al2O3 Particulates, International Journal for Scientific Research & Development| Vol. 2, Issue 07, 2014, 1-3 [Google Scholar]
- S.J. Huanga, Y.M. Hwangb , Y.S. Huangc, C.C. Huanga, Mechanical Properties Enhancement of Particle Reinforced Magnesium Matrix Composites Used for Hot Extruded Tubes, Vol. 127 (2015) ACTA PHYSICA POLONICA A, 1-3 [Google Scholar]
- Anwar Ul-Hamid, Microstructure, properties and applications of Zr-carbide, Zr-nitride and Zr-carbonitride coatings: a review, Mater. Adv., 2020, 1, 1012-1037 [CrossRef] [Google Scholar]
- Shivalingaiah K, Nagarajaiah V, Selvan CP, Kariappa ST, Chandrashekarappa NG, Lakshmikanthan A, Chandrashekarappa MPG, Linul E. Stir Casting Process Analysis and Optimization for Better Properties in Al-MWCNT-GR-Based Hybrid Composites. Metals. 2022; 12(8):1297. https://doi.org/10.3390/met12081297 [CrossRef] [Google Scholar]
- S. Sakthivelu P.P. Sethusundaram, M. Meignanamoorthy, M. Ravichandran, Synthesis of Metal Matrix Composites through Stir Casting Process - a Review, Mechanics and Mechanical Engineering Vol. 22, No. 1 (2018) 351-363. [Google Scholar]
- Sharma, Neeraj, et al. "Magnesium-Based Nanocomposites: An Overview of Applications and Challenges." Powder Metallurgy and Metal Ceramics 61.3-4 (2022): 205-220. [CrossRef] [Google Scholar]
- Purusothaman, D., RS Suresh Kumar, and B.G. Sivakumar. "Optimization of process parameter in machining inconel 800 by electrical spark eroding machine." Journal of Chemical and Pharmaceutical Sciences 9.2 (2016): 974-977. [Google Scholar]
- M. Meignanamoorthy, T. Anandaraj, M. Ravichandran, V. Mohanavel, S. Sathish, S.M. Sivagami, Wadi B Alonazi, Sami Al Obaid, Saleh Alfarraj,8 Kaliannan Durairaj, and Manikandan Ganesan, Wire Electrical Discharge Machining Characteristics of Al-4.4 Mg-0.7 Mn-0.15 Cr-12 wt.% MoO3 Composites Using Taguchi Technique, Advances in Materials Science and Engineering Volume 2022, Article ID 8410061, 1-10 pages [CrossRef] [Google Scholar]
- V. Kavimani1, K. Soorya Prakash, Titus Thankachan, Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics, Composites Part B: EngineerinG, Volume 167, 15 June 2019, Pages 621-630 [CrossRef] [Google Scholar]
- Amir Mostafapor and Hossein Vahedi1, Wire electrical discharge machining of AZ91 magnesium alloy; investigation of effect of process input parameters on performance characteristics, Eng. Res. Express 1 (2019) 015005 [CrossRef] [Google Scholar]
- Selvarasu, Sakthi, Mahendran Subramanian, and Jayasuthahar Thangasamy. "An effect of nano-SiC with different dielectric mediums on AZ61/7.5% B 4 C nanocomposites studied through electrical discharge machining and Taguchi based complex proportional assessment method." Matéria (Rio de Janeiro) 28 (2023): e20230058. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.