EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01068 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01068
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202455201068
Published online 23 July 2024
  1. F.C. Campbell, Lightweight materials: Understanding the basics (2012) ASM international Materials Park, Ohio, Pg: 33–119. [Google Scholar]
  2. J. Singh and A. Chauhan, Characterization of hybrid aluminium matrix composites for advanced applications - A review. Journal of Materials Research and Technology(2016), pg: 159–169. [CrossRef] [Google Scholar]
  3. I A Ibrahim, F A Mohamed, and E J Lavernia, Journal of Materials Science (1991) col 26 pg: 1137–1156. [CrossRef] [Google Scholar]
  4. Mandeep Singh, Deepak Bhandari, and Khushdeep Goyal. A review of the mechanical performance of nanoparticles reinforced aluminium matrix nanocomposites. Amterials today Proceedings vol 46 part 9 (2021) pg: 3198–3204. [CrossRef] [Google Scholar]
  5. Ndudim Henry Ononiwu, Ester T. Akinlabi and Chigbogu G. Ozoegwu. Sustainability in Production and Selection of Reinforcement particles in Aluminium Alloy Metal Matrix Composites: A Review. International Conference on Engineering for Sustainable World 1378(2019). [Google Scholar]
  6. S. Shamim, H. Singh, C. Sasikumar, and D. K. Yadav. (2017) “Microstructures and Mechanical Properties of Al-Si-Mg-Ti/Egg Shell Particulate Composites,” Materials Today: Proceedings (2017) pg:2887–2892. [Google Scholar]
  7. Rino JJ, Chandramohan D, Sucitharan KS. An overview on development of aluminium metal matrix composites with hybrid reinforcement. International Journal of Science and Research (IJSR), India Online ISSN: 2319‐7064. [Google Scholar]
  8. N. Valibeygloo, R. Azari Khosroshahi, and R. Taherzadeh Mousavian. Microstructural and mechanical properties of Al-4.5wt% Cu reinforced with alumina nanoparticles by stir casting method. International Journal of Minerals, Metallurgy and Materials Vol 20, (2013), Pg: 978. [CrossRef] [Google Scholar]
  9. Ali Mazahery and Mohsen Ostadshabani. Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites. Journal of Composite Materials (2011), pg: 2579–2586. [CrossRef] [Google Scholar]
  10. S. R. Bakshi, D. Lahiri, A. Agarwal. Carbon nanotube reinforced metal matrix composites-a review, 2010 Institute of Materials, Minerals and Mining and ASM International Published by Maney for the Institute and ASM International. [Google Scholar]
  11. John E. Allison, S. Gerald Cole,”metal- matrix composites in the automotive industry: Opportunities and challenges”, Journal of the minerals, metals and materials society volume 45, pg:19–24. [Google Scholar]
  12. S. Vignesh., C. Sanjeev, Investigation on Surface Quality in Machining of Hybrid Metal Matrix Composite (Al-SiC B4C), International Conference on Thermal, Material and Mechanical Engineering (2012). [Google Scholar]
  13. J. Hashim, L Looney and M S J Hashmi, “Metal Matrix Composites: Production by the Stir Casting Method”, Journal of Material Processing and Technology, Vol. 92, 1999, pp 1–7 [CrossRef] [Google Scholar]
  14. S. Gopalakannan, T. Senthivelan, S. Ranganathan, “Stastical optimization of EDM parameters on machining of aluminium hybrid metal matrix composite by applying Taguchi based Grey analysis” Journal of Scientific & Industrial Research vol 72(2013), pg 358–365. [Google Scholar]
  15. Vijay Rana, Harish Kumar, and Amresh Kumar. Fabrication of hybrid metal matrix composites- A review of comprehensive research studies. Materials Today Proceedings vol 56(2022) pg: 3102–3107. [CrossRef] [Google Scholar]
  16. V. M. Kevorkijan and B. Sustarsic, “A new production Technology for Discontinuously reinforced Al-SiC Composites”, Key. Eng. Mater, 1997, pp 127–131. [Google Scholar]
  17. S. Naher, D Brabazon and L Looney, “Development and Assessment of a New Quick Quench Stir Caster Design for the Production of Metal Matrix Composites”, Journal of Material Processing Technology, Vol. 166, 2004, pg:430–439. [Google Scholar]
  18. Alanemea KK, Ademilua BO, Bodunrin MO. Mechanical properties and corrosion behaviour of aluminium hybrid composites reinforced with silicon carbide and bamboo leaf Ash. Tribol Ind 2013;35(1):25–35. [Google Scholar]
  19. W. Zhou, Z. M. Xu, “Casting of SiC Reinforced Metal Matrix Composites”, Journal of Materials Processing Technology, Vol. 63, 1997, pp 358–363. [CrossRef] [Google Scholar]
  20. Uvaraja VC, Natrajan N. Optimization of friction and wear behavior in hybrid metal matrix composites using Taguchi technique. J Miner Mater Charact Eng 2012;11: 757–68 [Google Scholar]
  21. Boopathi M, Arulshri KP, Iyandurai N. Evaluation of mechanical properties of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites. Am J Appl Sci 2013;10(3):219–29. [CrossRef] [Google Scholar]
  22. P.K Jayashree, M.C Gowri Shankar, Achutha Kini, S.S Sharma and Raviraj Shetty, “Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites”, International Journal of Current Engineering and Technology, 2013. [Google Scholar]
  23. Christy TV, Murugan N, Kumar S, “A comparative study on the microstructures and mechanical properties of Al 6061 alloy and the MMC Al 6061/TiB2/12p”. Journal of Minerals & Materials Characterization & Engineering vol 9 (2010), pg:57–65. [CrossRef] [Google Scholar]
  24. S. Kaliappan, Shanmugam, Pradeep Johnson, M. Karthick, S. Sekar, Pravin P. Patil, M. K. S. Sai, K. P. Yuvaraj, and Venkatesan Govindaraajan, “Impact of AlN-SiC Nanoparticle Reinforcement on the Mechanical Behaviour of Al 6061-Based Hybrid Composite Developed by the Stir Casting Route”, Advances in Materials Science and Engineering, Vol 2022, Article ID 1399618, 8 pages. [Google Scholar]
  25. V.S.S. Venkatesh, Ganji Prabhakara Rao, Lokeswar Patnaik, Nakul Gupta, Sunil Kumar, Kuldeep K. Saxena, B.D.Y. Sunil, Sayed M. Eldin, and Fatima Hiader Kutham Al-kafaji “Processing and evaluation of nano SiC reinforced aluminium composite synthesized through ultrasonically assisted stir casting process”, Journal of materials research and technology 2023;24, pp 7394–7408. [CrossRef] [Google Scholar]
  26. D. Joslin Vijaya, J. Pradeep Kumar and D.S. Robinson Smart, “Analysis of hybrid aluminium composite material reinforced with Ti and NbC nanoparticles processed through stir casting”, Materials Today: Proceedings (2021), https://doi.org/10.1016/j.matpr.2021.05.683. [Google Scholar]
  27. Sanjay kumar Thakur, Manoj Gupta, “Improving mechanical performance of Al by using Ti as reinforcement”,Composites Part A:Applied Science and Manufacturing (2007), pg:1010–1018. [CrossRef] [Google Scholar]
  28. Mamoon A.A. Al-Jaafari, “Study the Effects of Titanium Dioxide nano particles reinforcement on the mechanical properties of Aluminum Alloys composite”, IOP Conf. Series: Materials Science and Engineering (2020), 1105 012062. [Google Scholar]
  29. Mardy Suhandani, Poppy Puspitasari, Jeefferie Abd Razak, “Impact, Hardness and Fracture Morphology of Aluminium Alloy (Al-Si) filled Cobalt Oxide Nanoparticles at Various Stir Casting Temperatures”, Malaysian Journal on Composite Science and Manufacturing Volume 5, Issue 1 (2021) 11–20. [CrossRef] [Google Scholar]
  30. S. Venkatesan, and M. Anthony Xavior, “Characterization on Aluminium alloy 7050 Metal matrix composite reinforced with Graphene Nanoparticles, Procedia Manufacturing 30 (2019) 120–127 [CrossRef] [Google Scholar]
  31. Macke A, Schultz BF, Rohatgi P. Metal matrix composites offer the automotive industry an opportunity to reduce vehicle weight, improve performance. Adv Mater Processes 2012;170(3):19–23 [Google Scholar]
  32. M.T. Sijo and K.R. Jayadevan/ Procedia Technoogy 24 (2016) 379 - 385 [CrossRef] [Google Scholar]
  33. M. Yilmaz and S. Altintas, “Properties of Al-Mg-SiC Composites Produced by a Modified Compo Casting Technique”, In Proceeding of the 2nd Biennial European joint conference on Engineering Systems, 1994, pp 119–124. [Google Scholar]
  34. Y. H. Seo and C. G. Kang, “Effects of Hot Extrusion Through a Curved Die on the Mechanical Properties of Al-SiC Composites Fabricated by Melt-Stirring”, Composites Science and Technology, Vol.59, 1999, pp 643–654. M.T. Sijo and K.R. Jayadevan /Procedia Technology 24 (2016) pg: 385. [CrossRef] [Google Scholar]
  35. Prasad DS, Shoba C, Ramanaiahet N. Investigations on mechanical properties of aluminum hybrid composites. J Mater Res Technol 2014;3(1):79–85. [CrossRef] [Google Scholar]
  36. D Manoj Singla, Deepak Dwivedi, Lakhvir Singh, Vikas Chawla, “Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite”, Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No.6, 2009, pp 455–467. [CrossRef] [Google Scholar]
  37. Macke A, Schultz BF, Rohatgi P, “Metal matrix composites offer the automotive industry an opportunity to reduce vehicle weight, improve performance”. Adv Materials & Processes 2012, pg:19–23. [Google Scholar]
  38. Tony Thomas. A, Parameshwaran. R, MuthuKrishnan. A, and Arvind Kumaran. M. Development of Feeding & Stirring Mechanisms for Stir Casting of Aluminium Matrix Comosites. International Conference on Advances in Manufacturing and Materials Engineering (2014) Pg: 1182–1191. [Google Scholar]
  39. Mohit Kumar Sahu and Raj Kumar Sahu. Aluminum based hybrid metal matrix composites: a review of selection philosophy and mechanical properties for advanced applications. IjmperD vol 10 Special Issue, (2020) pg: 8–28. [Google Scholar]
  40. J. Singh and A. Chauhan. Fabrication characteristics and tensile strength of novel Al2024/SiC/red mud composites processed via stir casting route,” Transactions of Nonferrous Metals Society of China (2017) pg:2573–2586. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.