EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01087 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01087
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/202455201087
Published online 23 July 2024
  1. Vinayaka, N., Lakshmikanthan, A., Patel, G.M., Pon, C. Mechanical, Micro structure and Wear properties of Al 6113 Fly Ash reinforced Composites: Comparison of as-cast and Heat-treated Conditions. Adv. Mater. Processing Technol. 2021, 1–16. [Google Scholar]
  2. Avinash, L., Kumar, H., Parthasarathy, A., Kumar, K.N.V., Sajjan, B. The Effect of Ceramic Reinforcement on the Microstructure, Mechanical Properties and Tribological Behavior of Al-7.5%Si-0.5%Mg alloy. Appl. Mech. Mater. 2017, 867, 39. [CrossRef] [Google Scholar]
  3. Gay, D. Composite Materials: Design and Applications; CRC Press: Boca Raton, FL, USA, 2014 [Google Scholar]
  4. Suthar, J., Patel, K.M. Processing issues, machining, and applications of aluminum metal matrix composites. Mater. Manuf. Processes 2018, 33, 499–527. [CrossRef] [Google Scholar]
  5. Sharma, A., Belokar, R.M., Kumar, S. Optimization of gas protected stir casting process using GRA and TOPSIS. Indian J. Eng. Mater. Sci. 2017, 24, 437–446. [Google Scholar]
  6. Konada, N.K., Oktem, H., Oz, A. Tribological and Mechanical Behavior of Brake Composite with ANN and TOPSIS. J. Mater. Eng. Perform. 2024, 1–18. [Google Scholar]
  7. Rathod, N.J., Chopra, M.K., Chaurasiya, P.K., Vidhate, U.S., Dasore, A. Optimization on the turning process parameters of SS 304 using Taguchi and TOPSIS. Ann. Data Sci. 2022, 10, 1405–1419. [Google Scholar]
  8. Jamwal, A., Agrawal, R., Gupta, P. Application of multi-criteria decision-making techniques in the optimization of mechano-tribological properties of copper-SiC-Graphite hybrid metal Matrix composites. In Intelligent Manufacturing. Materials Forming, Machining and Tribology; Springer: Cham, Switzerland, 2021; pp. 149–172. [Google Scholar]
  9. Kareem, A., Qudeiri, J.A., Abdudeen, A., Ahammed, T., Ziout, A. A review on AA 6061 metal matrix composites produced by stir casting. Materials 2021, 14, 175. [CrossRef] [PubMed] [Google Scholar]
  10. Shivalingaiah, K., Nagarajaiah, V., Selvan, C., Kariappa, S., Chandrashekarappa, N., Lakshmikanthan, A., Linul, E. (2022). Stir casting process analysis and optimization for better properties in Al-MWCNT-GR-based hybrid composites. Metals, 12(8), 1297. doi: 10.3390/met12081297 [CrossRef] [Google Scholar]
  11. Gugulothu, B., Sankar, S.L., Vjayakumar, S., Prasad, A.S.V., Thangaraj, M., Venkatachalapathy, M., & Rao, T.V.J. (2022). “Analysis of wear behaviour of AA5052 alloy composites by addition alumina with zirconium dioxide using the Taguchi-grey relational method”, Advances in Materials Science and Engineering, 2022, 1–7. https://doi.org/10.1155/2022/4545531 [CrossRef] [Google Scholar]
  12. Gugulothu, B., Seetharaman, S., Vjayakumar, S., & Jenila Rani, D. (2022). “Process parameter optimization for tensile strength and Hardness of Al-MMC using RSM technique”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.043 [Google Scholar]
  13. Pal, D., Vjayakumar, S., Rao, T.V.J., & Babu, R.S.R. (2022). “An examination of the tensile strength, hardness and SEM analysis of Al 5456 alloy by addition of different percentage of SiC/flyash”, Materials Today: Proceedings. [Google Scholar]
  14. Vijayakumar, S., Satheesh Kumar, P.S., Sampath kumar, P., Manickam, S., Ramaiah, G.B., & Pydi, H.P. (2022). The Effect of Stir-Squeeze Casting Process Parameters on Mechanical Property and Density of Aluminum Matrix Composite. In M.A. Khan (Ed.), Advances in Materials Science and Engineering (Vol. 2022, pp. 1–10). Hindawi Limited. https://doi.org/10.1155/2022/3741718 [CrossRef] [Google Scholar]
  15. Rao, T.V., Jeyakrishnan, S., Rajkumar, D.R., Subbiah, R., Vjayakumar, S., Sri, M.N.S., & Anusha, P. (2024). Fabrication and tensile impact and hardness test of Al6061/SiC/coconut shell ash composites. In 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023) (pp. 31–37). Cham: Springer Nature Switzerland. [CrossRef] [Google Scholar]
  16. Paramasivam, P., & Vjayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.312 [Google Scholar]
  17. Gugulothu, B., Nagarajan, N., Pradeep, A., Saravanan, G., Vijayakumar, S., & Rao, J. (2022). “Analysis of mechanical properties for Al-MMC fabricated through an optimized stir casting process”, Journal of Nanomaterials, 2022, 1–7. https://doi.org/10.1155/2022/2081189 [CrossRef] [Google Scholar]
  18. Vijayakumar, S., Dhasarathan, N., Devabalan, P., & Jehan, C. (2019). “Advancement and design of robotic manipulator control structures on cyber physical production system”, Journal of Computational and Theoretical Nanoscience, 16(2), 659–663. https://doi.org/10.1166/jctn.2019.7786 [CrossRef] [Google Scholar]
  19. Pradeep, A., Kavitha, N., Janardhana Rao, T.V., & Vijayakumar, S. (2022). Influence of nano alumina/vegetable oil based cutting fluid on MQL turning of stainless steel 304. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.06.547 [Google Scholar]
  20. Boopathy, G., Vanitha, V., Karthiga, K., Gugulothu, B., Pradeep, A., Pydi, H.P., & Vijayakumar, S. (2022). Optimization of tensile and impact strength for injection moulded nylon 66/SiC/B4c composites. Journal of Nanomaterials, 2022, 1–9 https://doi.org/10.1155/2022/4920774 [Google Scholar]
  21. Gugulothu, B., Anusha, P., Swapna Sri, M.N., Vijayakumar, S., Periyasamy, R., & Seetharaman, S. (2022). Optimization of stir-squeeze casting parameters to analyze the mechanical properties of Al7475/B4C/Al2O3/TiB2 hybrid composites by the Taguchi method. Advances in Materials Science and Engineering, 2022, 1–9. https://doi.org/10.1155/2022/3180442 [CrossRef] [Google Scholar]
  22. Anusha, P., Sri, M.N.S., Vijayakumar, S., Rao, T.V.J., Paramasivam, P., Jeyakrishnan, S., & Saxena, K.K. (2023). Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA central hybrid composite. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01341-5 [Google Scholar]
  23. N. Rajan, M.N.S. Sri, P. Anusha, R. Thanigaivelan, and S. Vijayakumar, “Performance optimization of electrochemical machining parameters on aluminum metal matrix composite,” Surf. Eng. Appl. Electrochem., vol. 59, no. 6, pp. 719–727, 2023. [CrossRef] [Google Scholar]
  24. Mahesh, G., Domakonda, V.K., Farooq, S., Subbiah, R., Rajkumar, D.R., Rao, N.S., & Vijayakumar, S. (2024). Evaluation of hardness properties of Al7475/B4C/fly ash hybrid composites using friction stir process. In 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023) (pp. 15–20). Cham: Springer Nature Switzerland. [CrossRef] [Google Scholar]
  25. S. Kolappan, T. Arunkumar, V. Mohanavel, K. Subramani, C. Kailasanathan, P. Kumaran, Ram Subbiah, S. Suresh Kumar, Materials Today: Proceedings, 62(8), 5540–5545 (2022). [CrossRef] [Google Scholar]
  26. K. Subramani, T. Arunkumar, V. Mohanavel, S. Kolappan, C. Kailasanathan, B. Boopathi Rathinam, Ram Subbiah, S. Suresh Kumar, Materials Today: Proceedings, 62(8), 5514–5518 (2022). [CrossRef] [Google Scholar]
  27. Mohanavel, V., Suresh Kumar, S., Ravichandran, M., Rajkumar Sivanraju, Palanivel Velmurugan, Ram Subbiah, ECS Transactions, 107(1), 12513–12524 (2022). [Google Scholar]
  28. Mohanavel, V., Priyadharshan, R., Ravichandran, M., Rajkumar Sivanraju, Palanivel Velmurugan, Ram Subbiah, ECS Transactions, 107(1), 12001–12010 (2022). [CrossRef] [Google Scholar]
  29. S. Rajkumar, K. Arul, K. Mageshkumar, T. Maridurai, Ram Subbiah, V. Mohanavel, M. Ravichandran, Materials Today: Proceedings, 59(2), 1429–1433 (2022). [CrossRef] [Google Scholar]
  30. T. Raja, V. Mohanavel, S. Suresh Kumar, S. Rajkumar, M. Ravichandran, Ram Subbiah, Materials Today: Proceedings, 59(2), 1345–1348 (2022). [Google Scholar]
  31. R. Ganesh, Ram Subbiah, K. Chandrasekaran, Materials Today: Proceedings, 2, 1441–1449(2015). [CrossRef] [Google Scholar]
  32. Ram Subbiah, Md. Rahel, A Sravika, R. Ambika, A. Srujana, E. Navya, Materials Today: Proceedings, 18, 2265–2269 (2019). [CrossRef] [Google Scholar]
  33. B. Chaitanyakumar, P. SriCharan, Kanishkar Jayakumar, D. Alankrutha, G. Sindhu, Ram Subbiah, Materials Today: Proceedings, 27, 1541–1544 (2020). [CrossRef] [Google Scholar]
  34. T. Lakshmi Deepak, G. Ananda Mithra, K. Lokesh, B. Sai Chandra, Ram Subbiah, Materials Today: Proceedings, 27, 1681–1684 (2020). [Google Scholar]
  35. A. Rohit Sai Krishna, B. Vamshi Krishna, T. Sashank, D. Harshith, Ram Subbiah, Materials Today: Proceedings, 27, 1555–1558 (2020). [CrossRef] [Google Scholar]
  36. A. Jayapradha, G. JimsJohnWessley, G. Vimalarani, P. RameshKumar, Ram Subbiah, S. Maniraj, Materials Today: Proceedings, 45, 2121–2124 (2021). [CrossRef] [Google Scholar]
  37. Veernapati Gitanjali, Panati Nithya, P. Pandiarajan, Nunna Dhruthi, Tappa Vineeth Raj, Ram Subbiah, Materials Today: Proceedings, 45, 2479–2481 (2021). [CrossRef] [Google Scholar]
  38. K. ManjithSrinivas, S. Bharath, P.N.V. KrishnaChaitanya, M. Pramod, Ram Subbiah, Materials Today: Proceedings, 27, 1575–1578 (2020). [Google Scholar]
  39. Rajesh, M., Sri, M.N.S., Jeyakrishnan, S. et al. Optimization parameters for electro discharge machining on Nimonic 80A alloy using grey relational analysis. Int J Interact Des Manuf 18, 1429–1442 (2024) [CrossRef] [Google Scholar]
  40. Karumuri, S., Haldar, B., Pradeep, A. et al. Multi-objective optimization using Taguchi based grey relational analysis in friction stir welding for dissimilar aluminium alloy. Int J Interact Des Manuf 18, 1627–1644 (2024). [CrossRef] [Google Scholar]
  41. Srividya, K., Ravichandran, S., Thirunavukkarasu, M. et al. Examination of electrochemical machining parameters for AA6082/ZrSiO4/SiC composite using Taguchi-ANN approach. Int J Interact Des Manuf 18, 1459–1473 (2024). [CrossRef] [Google Scholar]
  42. Veeranjaneyulu, I., Haripriya, V., Saminathan, R. et al. Friction and wear optimization of SiC/graphite reinforced AZ31 hybrid composite using Taguchi method. Int J Interact Des Manuf 18, 1373–1386 (2024). [CrossRef] [Google Scholar]
  43. J. Anix Joel Singh, T. Vishnu Vardhan, J. Vairamuthu, B. Stalin, Ram Subbiah, Materials Today: Proceedings, 33, 4893–4896 (2020). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.