EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01100 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01100
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202455201100
Published online 23 July 2024
  1. Góra, Paulina, and Przemysław Łopato. “Metamaterials’ Application in Sustainable Technologies and an Introduction to Their Influence on Energy Harvesting Devices.” Applied Sciences 13, 13 (2023): 7742. [CrossRef] [Google Scholar]
  2. Ali, Adnan, Anirban Mitra, and Brahim Aïssa. “Metamaterials and metasurfaces: A review from the perspectives of materials, mechanisms and advanced metadevices.” Nanomaterials 12, 6 (2022): 1027. [CrossRef] [Google Scholar]
  3. Suresh Kumar, N., K. Chandra Babu Naidu, Prasun Banerjee, T. V. S. R. P. Anil Babu, and B. Venkata Shiva Reddy. “A review on metamaterials for device applications.” Crystals 11, 5 (2021): 518. [CrossRef] [Google Scholar]
  4. Franco, Arlet Patricia, and Luis Armando Espitia. “Characterization of metamaterials.” In Advanced Metamaterials for Engineers, 1-1. Bristol, UK: IOP Publishing, 2023. [Google Scholar]
  5. Torres-Huerta, Ana Laura, Aurora Antonio-Pérez, Yolanda García-Huante, Nayelhi Julieta Alcázar-Ramírez, and Juan Carlos Rueda-Silva. “Biomolecule-based optical metamaterials: design and applications.” Biosensors 12, 11 (2022): 962. [CrossRef] [PubMed] [Google Scholar]
  6. Chen, Yixin, Bin Ai, and Zi Jing Wong. “Soft optical metamaterials. ” Nano Convergence 7, 1 (2020): 18. [CrossRef] [PubMed] [Google Scholar]
  7. Wei, Jingjiang, Fei Pan, Hang Ping, Kun Yang, Yanqing Wang, Qingyuan Wang, and Zhengyi Fu. “Bioinspired additive manufacturing of hierarchical materials: From biostructures to functions.” Research, 6 (2023): 0164. [CrossRef] [PubMed] [Google Scholar]
  8. Veeman, Dhinakaran, M. Swapna Sai, P. Sureshkumar, T. Jagadeesha, L. Natrayan, M. Ravichandran, and Wubishet Degife Mammo. “Additive manufacturing of biopolymers for tissue engineering and regenerative medicine: an overview, potential applications, advancements, and trends.” International Journal of Polymer Science 2021 (2021): 1-20. [CrossRef] [Google Scholar]
  9. Mulvihill, Martin J., Evan S. Beach, Julie B. Zimmerman, and Paul T. Anastas. “Green chemistry and green engineering: a framework for sustainable technology development.” Annual review of environment and resources 36 (2011): 271-293. [CrossRef] [Google Scholar]
  10. Yang, Yang, Xuan Song, Xiangjia Li, Zeyu Chen, Chi Zhou, Qifa Zhou, and Yong Chen. “Recent progress in biomimetic additive manufacturing technology: from materials to functional structures.” Advanced Materials 30, 36 (2018): 1706539. [CrossRef] [Google Scholar]
  11. Wu, Xin, Yutai Su, and Jing Shi. “Perspective of additive manufacturing for metamaterials development.” Smart Materials and Structures 28, 9 (2019): 093001. [Google Scholar]
  12. Zhao, Xianhui, Canan Karakaya, Moriko Qian, Rongge Zou, Weijie Zhang, Zhou Lu, Debtanu Maiti et al. “3D printing synthesis of catalysts.” Materials Today Sustainability (2024): 100746. [CrossRef] [Google Scholar]
  13. Tasolamprou, Anna C., Despoina Mentzaki, Zacharias Viskadourakis, Eleftherios N. Economou, Maria Kafesaki, and George Kenanakis. “Flexible 3D printed conductive metamaterial units for electromagnetic applications in microwaves.” Materials 13, 17 (2020): 3879 [CrossRef] [PubMed] [Google Scholar]
  14. Girish, K. M., Naik, R., Prashantha, S. C., Nagabhushana, H., Nagaswarupa, H. P., Raju, K. A., & & Nagabhushana, B.M. (2015). Zn2TiO4: Eu3+ nanophosphor: self explosive route and its near UV excited photoluminescence properties for WLEDs. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 138, 857-865. [CrossRef] [Google Scholar]
  15. Damodharan, D., Rajesh Kumar, B., Gopal, K., De Poures, M. V., & Sethuramasamyraja, B. (2019). Utilization of waste plastic oil in diesel engines: a review. Reviews in Environmental Science and Bio/Technology, 18(4), 681-697. [CrossRef] [Google Scholar]
  16. Girish, K. M., Prashantha, S. C., Nagabhushana, H., Ravikumar, C. R., Nagaswarupa, H. P., Naik, R., & & Umesh, B. (2018). Multi-functional Zn2TiO4: Sm3+ nanopowders: excellent performance as an electrochemical sensor and an UV photocatalyst. Journal of Science: Advanced Materials and Devices, 3(2), 151-160. [CrossRef] [Google Scholar]
  17. Naik, R., Prashantha, S. C., Nagabhushana, H., Sharma, S. C., Nagaswarupa, H. P., Anantharaju, K. S., & & Girish, K.M. (2016). Tunable white light emissive Mg2SiO4: Dy3+ nanophosphor: its photoluminescence, Judd-Ofelt and photocatalytic studies. Dyes and Pigments, 127, 25-36. [CrossRef] [Google Scholar]
  18. Rathod, V. P., & Tanveer, S. (2009). Pulsatile flow of couple stress fluid through a porous medium with periodic body acceleration and magnetic field. Bulletin of the Malaysian Mathematical Sciences Society, 32(2). [Google Scholar]
  19. Kumar, Raj, Bipin K. Singh, and Praveen C. Pandey. “Broadband metamaterial absorber in the visible region using a petal-shaped resonator for solar cell applications.” Physica E: Low-dimensional Systems and Nanostructures, 142 (2022): 115327. [CrossRef] [Google Scholar]
  20. Kumar, Praveen, Tanweer Ali, and MM Manohara Pai. “Electromagnetic metamaterials: A new paradigm of antenna design.” IEEE Access 9 (2021): 18722-18751. [CrossRef] [Google Scholar]
  21. Milias, Christos, Rasmus B. Andersen, Pavlos I. Lazaridis, Zaharias D. Zaharis, Bilal Muhammad, Jes TB Kristensen, Albena Mihovska, and Dan DS Hermansen. “Metamaterial-inspired antennas: A review of the state of the art and future design challenges.” IEEE Access 9 (2021): 89846-89865. [CrossRef] [Google Scholar]
  22. Lv, Jiangtao, Ming Zhou, Qiongchan Gu, Xiaoxiao Jiang, Yu Ying, and Guangyuan Si. “Metamaterial lensing devices.” Molecules 24, 13 (2019): 2460. [CrossRef] [Google Scholar]
  23. Liu, Cheng, Wei Wang, Djakou Nekui Olivier, Zhixia Wang, Bei Ding, and Jingjing Feng. “Target driven design of electromagnetic metamaterial for dual-band Wi-Fi energy harvester.” Sensors and Actuators A: Physical, 345 (2022): 113815. [CrossRef] [Google Scholar]
  24. Asad, Abeer, Ali Ahmad, Pocholo Pacpaco, Claire Thampongphan, and Muhammad Hasibul Hasan. “Application of Metamaterial in Renewable Energy: A Review.” International Journal of Engineering Materials and Manufacture 9, 2 (2024): 60-80. [Google Scholar]
  25. Khan, Muhammad Shaheryar, R. A. Shakoor, Osama Fayyaz, and Elsadig Mahdi Ahmed. “A focused review on techniques for achieving cloaking effects with metamaterials.” Optik (2023): 171575. [Google Scholar]
  26. Al-Bawri, Samir Salem, Hui Hwang Goh, Md Shabiul Islam, Hin Yong Wong, Mohd Faizal Jamlos, Adam Narbudowicz, Muzammil Jusoh, Thennarasan Sabapathy, Rizwan Khan, and Mohammad Tariqul Islam. “Compact ultra-wideband monopole antenna loaded with metamaterial.” Sensors 20, 3 (2020): 796. [CrossRef] [Google Scholar]
  27. Konstantopoulos, Georgios, Elias P. Koumoulos, and Costas A. Charitidis. “Digital Innovation Enabled Nanomaterial Manufacturing; Machine Learning Strategies and Green Perspectives.” Nanomaterials 12, no., 15 (2022): 2646. [CrossRef] [PubMed] [Google Scholar]
  28. Chen Saleh, Hosam M., and Amal I. Hassan. “Synthesis and characterization of nanomaterials for application in cost-effective electrochemical devices.” Sustainability 15, 14 (2023): 10891. [CrossRef] [Google Scholar]
  29. Ramprasad, P., Basavapoornima, C., Depuru, S. R., & Jayasankar, C. K. (2022). Spectral investigations of Nd3+: Ba (PO3) 2+ La2O3 glasses for infrared laser gain media applications. Optical Materials, 129, 112482. [CrossRef] [Google Scholar]
  30. Goud, J. S., Srilatha, P., Kumar, R. V., Kumar, K. T., Khan, U., Raizah, Z., & & Galal, A.M. (2022). Role of ternary hybrid nanofluid in the thermal distribution of a dovetail fin with the internal generation of heat. Case Studies in Thermal Engineering, 35,102113. [CrossRef] [Google Scholar]
  31. Yue, L., Jayapal, M., Cheng, X., Zhang, T., Chen, J., Ma, X., & & Zhang, W. (2020). Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Applied Surface Science, 512, 145686. [CrossRef] [Google Scholar]
  32. Indira, D. N. V. S. L. S., Ganiya, R.K., Babu, P.A., Xavier, A.J., Kavisankar, L., Hemalatha, S., & & Yeshitla, A. (2022). Improved artificial neural network with state order dataset estimation for brain cancer cell diagnosis. BioMed Research International, 2022. [Google Scholar]
  33. Jaidass, N., Moorthi, C. K., Babu, A. M., & Babu, M. R. (2018). Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications. Heliyon, 4(3). [Google Scholar]
  34. Shen, Sabrina C., Eesha Khare, Nicolas A. Lee, Michael K. Saad, David L. Kaplan, and Markus J. Buehler. “Computational design and manufacturing of sustainable materials through first-principles and materiomics.” Chemical Reviews 123, 5 (2023): 2242-2275. [CrossRef] [PubMed] [Google Scholar]
  35. Chen, Zhaochang, Ying-Tian Lin, Hadi Salehi, Zhumei Che, Ye Zhu, Jun Ding, Biyun Sheng, Ronghua Zhu, and Pengcheng Jiao. “Advanced Fabrication of Mechanical Metamaterials Based on Micro/Nanoscale Technology.” Advanced Engineering Materials 25, 22 (2023): 2300750 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.