EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01103 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01103
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202455201103
Published online 23 July 2024
  1. Nawaz, Sonia, Hamza Babar, Hafiz Muhammad Ali, Muhammad Usman Sajid, Muhammad Mansoor Janjua, Zafar Said, Arun Kumar Tiwari, L. Syam Sundar, and Changhe Li. “Oriented square shaped pin-fin heat sink: performance evaluation employing mixture based on ethylene glycol/water graphene oxide nanofluid.” Applied Thermal Engineering, 206 (2022): 118085. [CrossRef] [Google Scholar]
  2. Ijam, Ali, R. Saidur, Poobalan Ganesan, and A. Moradi Golsheikh. “Stability, thermo-physical properties, and electrical conductivity of graphene oxide-deionized water/ethylene glycol based nanofluid.” International Journal of Heat and Mass Transfer 87 (2015): 92-103. [CrossRef] [Google Scholar]
  3. Ponangi, Babu Rao, V. Krishna, and K. N. Seetharamu. “Effect of ultralow concentrated reduced graphene oxide nanofluid on radiator performance.” Journal of Heat Transfer 143, 8 (2021): 082501. [CrossRef] [Google Scholar]
  4. Selvam, C., D. Mohan Lal, and Sivasankaran Harish. “Thermal conductivity and specific heat capacity of water-ethylene glycol mixture-based nanofluids with graphene nanoplatelets.” Journal of Thermal Analysis and Calorimetry 129 (2017): 947-955. [CrossRef] [Google Scholar]
  5. Ijaz, Hamdoon, Hassan Raza, Ghulam Abbas Gohar, Sana Ullah, Awais Akhtar, and Muhammad Imran. “Effect of graphene oxide doped nano coolant on temperature drop across the tube length and effectiveness of car radiator-A CFD study.” Thermal Science and Engineering Progress, 20 (2020): 100689. [CrossRef] [Google Scholar]
  6. MADDERLA, Sandhya, Devarajan RAMASAMY, K. Sudhakar, Kumaran KADİRGAMA, and Wan Sharuzi WAN HARUN. “Heat transfer performance of a radiator with and without louvered strip by using Graphene-based nanofluids.” Journal of Thermal Engineering 7, 6 (2021): 1315-1328. [CrossRef] [Google Scholar]
  7. Roohani, Ebrahim, and Davood Toghraie. “Heat transfer improvement of antifreeze by changing it to hybrid nanofluid: effects of hybrid magnesium oxide-graphene oxide nanopowders.” Journal of Thermal Analysis and Calorimetry 147, no. 12 (2022): 6777–6791. [CrossRef] [Google Scholar]
  8. Subhedar, Dattatraya G., Bharat M. Ramani, Kamlesh V. Chauhan, Hitesh Panchal, Sagar M. Prajapati, Ali Jawad Al-rubaie, and Mustafa Musa Jaber. “Experimental study on the variation of car radiator frontal area using Al2O3/water-ethylene glycol nano coolant.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023): 09544089231159994. [Google Scholar]
  9. Li, Xiaoke, Changjun Zou, and Aihua Qi. “Experimental study on the thermo-physical properties of car engine coolant (water/ethylene glycol mixture type) based SiC nanofluids.” International Communications in Heat and Mass Transfer 77 (2016): 159–164. [CrossRef] [Google Scholar]
  10. Zakaria, Irnie, W.H. Azmi, A. M. I. Mamat, Rizalman Mamat, R. Saidur, SF Abu Talib, and W. A. N. W. Mohamed. “Thermal analysis of Al2O3-water ethylene glycol mixture nanofluid for single PEM fuel cell cooling plate: an experimental study.” International Journal of Hydrogen Energy 41, 9 (2016): 5096-5112. [CrossRef] [Google Scholar]
  11. Sathish, T., R.V. Sabariraj, K. Muthukumar, and S. Karthick. “Experimental investigation of convective heat transfer coefficient on nano particles mixture used in automobile radiator based on mass flow rate.” Materials Today: Proceedings 33 (2020): 2524-2529. [CrossRef] [Google Scholar]
  12. Azizi, Mehdi, and Bizhan Honarvar. “Synthesis of highly stable nanofluids including polyvinyl alcohol-treated graphene oxide for improved heat dissipation in a tubular heat exchanger.” Journal of Thermal Analysis and Calorimetry 145, no. 1 (2021): 13-25. [CrossRef] [Google Scholar]
  13. Narayanasamy, Manikanda Prabu, Sureshkannan Gurusamy, Suresh Sivan, and A. P. Senthilkumar. “Heat transfer analysis of looped micro heat pipes with graphene oxide nanofluid for Li-ion battery.” Thermal Science 25, no. 1 Part A (2021): 395-405. [CrossRef] [Google Scholar]
  14. Das, Nipu Kumar, Somtirtha Santra, Papu Kumar Naik, Maureen Shama Vasa, Rishi Raj, Suryasarathi Bose, and Tamal Banerjee. “Evaluation of thermophysical properties and thermal performance of amine-functionalized graphene oxide/deep eutectic solvent nanofluids as heat-transfer media for desalination systems.” ACS Sustainable Chemistry & Engineering 11, no. 14 (2023): 5376-5389. [CrossRef] [Google Scholar]
  15. Suji Prasad, S. J., M. Thangatamilan, M. Suresh, Hitesh Panchal, Christober Asir Rajan, C. Sagana, B. Gunapriya, Aditi Sharma, Tusharkumar Panchal, and Kishor Kumar Sadasivuni. “An efficient LoRa-based smart agriculture management and monitoring system using wireless sensor networks.” International Journal of Ambient Energy 43, no. 1 (2022): 5447-5450. [CrossRef] [Google Scholar]
  16. Joseph, Sudha, Kavitha Joseph, Trevor C. Lindley, and David Dye. “The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy.” International Journal of Plasticity, 131 (2020): 102743. [CrossRef] [Google Scholar]
  17. Prasad, C. Durga, S. Kollur, M. Nusrathulla, G. Satheesh Babu, M. B. Hanamantraygouda, B. N. Prashanth, and N. Nagabhushana. “Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process.” Transactions of the IMF 102, no. 1 (2024): 22-28. [CrossRef] [Google Scholar]
  18. Meenal, R., D. Binu, K. C. Ramya, Prawin Angel Michael, K. Vinoth Kumar, E. Rajasekaran, and B. Sangeetha. “Weather forecasting for renewable energy system: a review.” Archives of Computational Methods in Engineering 29, no. 5 (2022): 2875 –2891. [CrossRef] [Google Scholar]
  19. Akshatha, S., S. Sreenivasa, L. Parashuram, Fahad A. Alharthi, and Tadimety Madhu Chakrapani Rao. “Microwave assisted green synthesis of p-type Co3O4@ Mesoporous carbon spheres for simultaneous degradation of dyes and photocatalytic hydrogen evolution reaction.” Materials Science in Semiconductor Processing 121 (2021):105432. [CrossRef] [Google Scholar]
  20. Akshatha, S., S. Sreenivasa, L. Parashuram, V. Udaya Kumar, S. C. Sharma, H. Nagabhushana, Sandeep Kumar, and T. Maiyalagan. “Synergistic effect of hybrid Ce3+/Ce4+ doped Bi2O3 nano-sphere photocatalyst for enhanced photocatalytic degradation of alizarin red S dye and its NUV excited photoluminescence studies.” Journal of Environmental Chemical Engineering 7, no., 3 (2019): 103053. [CrossRef] [Google Scholar]
  21. Ramkumar, M., C. Ganesh Babu, K. Vinoth Kumar, D. Hepsiba, A. Manjunathan, and R. Sarath Kumar. “ECG cardiac arrhythmias classification using DWT, ICA and MLP neural networks.” In Journal of Physics: Conference Series, vol. 1831, no. 1, p. 012015.IOP Publishing, 2021. [CrossRef] [Google Scholar]
  22. Kumar, CB Pradeep, B. S. Prathibha, K. N. N. Prasad, M. S. Raghu, M. K. Prashanth, B. K. Jayanna, Fahad A. Alharthi, S. Chandrasekhar, H. D. Revanasiddappa, and K. Yogesh Kumar. “Click synthesis of 1, 2, 3-triazole based imidazoles: Antitubercular evaluation, molecular docking and HSA binding studies.” Bioorganic & Medicinal Chemistry Letters, 36 (2021): 127810. [CrossRef] [PubMed] [Google Scholar]
  23. Rajesh, A., K. Gopal, B. Rajesh Kumar, A. P. Sathiyagnanam, and D. Damodharan. “Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications.” Fuel 278 (2020): 118315. [CrossRef] [Google Scholar]
  24. Naik, Ramachandra, S. C. Prashantha, H. Nagabhushana, S. C. Sharma, H. P. Nagaswarupa, and K. M. Girish. “Effect of fuel on auto ignition route, photoluminescence and photometric studies of tunable red emitting Mg2SiO4: Cr3+ nanophosphors for solid state lighting applications.” Journal of Alloys and Compounds 682 (2016): 815-824. [CrossRef] [Google Scholar]
  25. Naveen Kumar, Rangaswamy, J. Suresh Goud, Pudhari Srilatha, Pattasale T. Manjunatha, S. Prasanna Rani, Raman Kumar, and S. Suresha. “Cattaneo-Christov heat flux model for nanofluid flow over a curved stretching sheet: An application of Stefan blowing.” Heat Transfer 51, no. 6 (2022): 4977-4991. [CrossRef] [Google Scholar]
  26. Vallabhuni, Rajeev Ratna, G. Yamini, T. Vinitha, and S. Sanath Reddy. “Performance analysis: D-Latch modules designed using 18nm FinFET Technology.” In 2020 International Conference on Smart Electronics and Communication (ICOSEC), pp. 1169-1174. IEEE, 2020. [CrossRef] [Google Scholar]
  27. Dhanalaxmi, B., and G. Apparao Naidu. “A survey on design and analysis of robust IoT architecture.” In 2017 International Conference on Innovative Mechanisms for Industry Applications (ICIMIA), pp. 375-378. IEEE, 2017. [CrossRef] [Google Scholar]
  28. Nikam, Pritam B., Jayendra Kumar, V. Sivanagaraju, and Achinta Baidya. “Dual-band reconfigurable EBG loaded circular patch MIMO antenna using defected ground structure (DGS) and PIN diode integrated branch-lines (BLs).” Measurement, 195 (2022): 111127. [CrossRef] [Google Scholar]
  29. Vallabhuni, Rajeev Ratna, Jujavarapu Sravana, Chandra Shaker Pittala, Mikkili Divya, B. M. S. Rani, and Vallabhuni Vijay. “Universal shift register designed at low supply voltages in 20 nm FinFET using multiplexer.” In Intelligent Sustainable Systems: Proceedings of ICISS 2021, 203-212. Singapore: Springer Singapore, 2021. [Google Scholar]
  30. Kishore, Somasundaram Chandra, Raji Atchudan, Thomas Nesakumar Jebakumar Immanuel Edison, Suguna Perumal, Muthulakshmi Alagan, Rajangam Vinodh, Mani Shanmugam, and Yong Rok Lee. “Solid waste-derived carbon fibers-trapped nickel oxide composite electrode for energy storage application.” Energy & Fuels 34, no. 11 (2020): 14958-14967. [CrossRef] [Google Scholar]
  31. Malagavelli, Venu, Srinivas Angadi, J. S. R. Prasad, and Subodh Joshi. “Influence of metakaolin in concrete as partial replacement of cement.” Int J Civil Eng Technol 9, no. 7 (2018): 105-111. [Google Scholar]
  32. Ashok Babu, Puralasetty, Javanna Latheef Mazher Iqbal, S. Siva Priyanka, Machana Jithender Reddy, Gaddam Sunil Kumar, and Rajaram Ayyasamy. “Power control and optimization for power loss reduction using deep learning in microgrid systems.” Electric Power Components and Systems 52, 2 (2024): 219-232. [CrossRef] [Google Scholar]
  33. Saritha, M., M. Lavanya, G. Ajitha, Mulinti Narendra Reddy, P. Annapurna, M. Sreevani, S. Swathi, S. Sushma, and Vallabhuni Vijay. “A VLSI design of clock gated technique based ADC lock-in amplifier.” International Journal of System Assurance Engineering and Management 13, 5 (2022): 2743-2750. [Google Scholar]
  34. Pittala, Chandra Shaker, Rajeev Ratna Vallabhuni, Vallabhuni Vijay, Usha Rani Anam, and Kancharapu Chaitanya. “Numerical analysis of various plasmonic MIM/MDM slot waveguide structures.” International Journal of System Assurance Engineering and Management 13, 5 (2022): 2551-2558. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.