EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 552 (2024) E3S Web Conf., 552 (2024) 01108 References
Open Access
Issue
E3S Web Conf.
Volume 552, 2024
16th International Conference on Materials Processing and Characterization (ICMPC 2024)
Article Number 01108
Number of page(s) 12
DOI https://doi.org/10.1051/e3sconf/202455201108
Published online 23 July 2024
  1. Pieters, Philip. “Versatile MEMS and mems integration technology platforms for cost effective MEMS development.” In 2009 European Microelectronics and Packaging Conference, pp. 1-5. IEEE, 2009. [Google Scholar]
  2. Lu, Jian, Hideki Takagi, Yuta Nakano, and Ryutaro Maeda. “Large-scale and flexible MEMS-IC integration by using carrier wafer.” In 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp. 93-97. IEEE, 2012. [Google Scholar]
  3. Lu, Kuo, Xin Zhou, Qingsong Li, Kai Wu, Yongmeng Zhang, Ming Zhuo, Xuezhong Wu, and Dingbang Xiao. “A Wide Range Frequency Coherent Modulation Control Based on Modal Coupling Effect in MEMS Resonators.” In 2021 IEEE 34th international conference on micro electro mechanical systems (MEMS), pp. 161-164. IEEE, 2021. [CrossRef] [Google Scholar]
  4. Vercesi, Federico, Lorenzo Corso, Giorgio Allegato, Gabriele Gattere, Luca Guerinoni, Carlo Valzasina, Andrea Nomellini, Anna Alessandri, and Ilaria Gelmi. “Thelma-Double: a new technology platform for manufacturing of high-performance MEMS inertial sensors.” In 2022 IEEE 35th International Conference on Micro Electro Mechanical Systems Conference (MEMS), pp. 778-781. IEEE, 2022. [CrossRef] [Google Scholar]
  5. Zhang, Jin, Jianfeng Zhang, Wenqi Li, Ziji Wang, and Jintang Shang. “M z Atomic Magnetometer Using A 3D Mems Glass Alkali Vapor Cell With Vertical Sidewalls.” In 2023 IEEE 36th International Conference on Micro Electro Mechanical Systems (MEMS), pp. 542-545. IEEE, 2023. [CrossRef] [Google Scholar]
  6. Chu, Chenlei, Xiaoping Liao, Hao Yan, and Zhenxiang Yi. “RF MEMS thermistor power sensor based on wheatstone full-bridge structure.” In 2019 IEEE 32nd International Conference on Micro Electro Mechanical Systems (MEMS), pp. 891-894. IEEE, 2019. [CrossRef] [Google Scholar]
  7. Van Hoof, Chris. “Invited talk 2: MEMS-enabled smart autonomous systems.” In 2008 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp. 373–373. IEEE, 2008. [CrossRef] [Google Scholar]
  8. Ghodssi, Reza. “Invited talk 1 : Integrative MEMS/NEMS technology for micro and nano systems.” In 2008 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp. 1-1. IEEE, 2008. [Google Scholar]
  9. Baldasarre, Leonardo, Alessandro Tocchio, Mikel Azpeitia Urquia, and Sarah Zerbini. “Lattice structure for a critically damped high-G MEMS accelerometer.” In 2013 symposium on design, test, integration and packaging of MEMS/MOEMS (DTIP), pp. 1-2. IEEE, 2013. [Google Scholar]
  10. Isagawa, Kohei, Dong F. Wang, Takeshi Kobayashi, Toshihiro Itoh, and Ryutaro Maeda. “Developing MEMS DC electric current sensor for end-use monitoring of DC power supply.” In 2011 Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP), pp. 231-236. IEEE, 2011. [Google Scholar]
  11. Bohua, S. U. N., and Zhang Rui. “MEMS accelerometer with two thin film piezoelectric read-out.” In 2005 International Conference on MEMS, NANO and Smart Systems, p. 318. IEEE, 2005. [CrossRef] [Google Scholar]
  12. Aoyagi, I., K. Shimaoka, S. Kato, W. Makishi, Y. Kawai, S. Tanaka, T. Ono, M. Esashi, and K. Hane. “2-axis MEMS scanner for a laser range finder.” In 16th International Conference on Optical MEMS and Nanophotonics, pp. 39-40. IEEE, 2011. [CrossRef] [Google Scholar]
  13. Yan, Hao, Xiaoping Liao, Chen Chen, and Chenglin Li. “An integrated microwave detector based on MEMS technology for X-band application.” IEEE Electron Device Letters 39, no. 5 (2018): 742-745. [CrossRef] [Google Scholar]
  14. Robin, Renaud, Salim Touati, Karim Segueni, Olivier Millet, and Lionel Buchaillot. “A new four states high deflection low actuation voltage electrostatic MEMS switch for RF applications.” In 2008 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp. 56-59. IEEE, 2008. [CrossRef] [Google Scholar]
  15. Liu, Lin, and Huikai Xie. “Three-dimensional confocal scanning microscope using an MEMS mirror for lateral scan and an MEMS lens scanner for depth scan.” In 2012 International Conference on Optical MEMS and Nanophotonics, pp. 158-159. IEEE, 2012. [CrossRef] [Google Scholar]
  16. Lobur, Mykhaylo, and Andriy Holovatyy. “Overview and analysis of readout circuits for capacitive sensing in MEMS gyroscopes (MEMS angular velocity sensors).” In 2009 5th International Conference on Perspective Technologies and Methods in MEMS Design, pp. 161-163. IEEE, 2009. [Google Scholar]
  17. Zhang Di, Jintang Shang, Boyin Chen, Chao Xu, Junwen Liu, Hui Yu, Xinhu Luo, and Jingdong Liu. “A novel wafer level hermetic packaging for MEMS devices using micro glass cavities fabricated by a hot forming process.” In 2010 11th International Conference on Electronic Packaging Technology & High Density Packaging, pp. 921–924. IEEE, 2010. [CrossRef] [Google Scholar]
  18. Suji Prasad, S. J., M. Thangatamilan, M. Suresh, Hitesh Panchal, Christober Asir Rajan, C. Sagana, B. Gunapriya, Aditi Sharma, Tusharkumar Panchal, and Kishor Kumar Sadasivuni. “An efficient LoRa-based smart agriculture management and monitoring system using wireless sensor networks.” International Journal of Ambient Energy 43, 1 (2022): 5447-5450. [CrossRef] [Google Scholar]
  19. Joseph, Sudha, Kavitha Joseph, Trevor C. Lindley, and David Dye. “The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy.” International Journal of Plasticity, 131 (2020): 102743. [CrossRef] [Google Scholar]
  20. Prasad, C. Durga, S. Kollur, M. Nusrathulla, G. Satheesh Babu, M. B. Hanamantraygouda, B. N. Prashanth, and N. Nagabhushana. “Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process.” Transactions of the IMF 102, 1 (2024): 22-28. [CrossRef] [Google Scholar]
  21. Meenal, R., D. Binu, K. C. Ramya, Prawin Angel Michael, K. Vinoth Kumar, E. Rajasekaran, and B. Sangeetha. “Weather forecasting for renewable energy system: a review.” Archives of Computational Methods in Engineering 29, 5 (2022): 2875-2891. [CrossRef] [Google Scholar]
  22. Akshatha, S., S. Sreenivasa, L. Parashuram, Fahad A. Alharthi, and Tadimety Madhu Chakrapani Rao. “Microwave assisted green synthesis of p-type Co3O4@ Mesoporous carbon spheres for simultaneous degradation of dyes and photocatalytic hydrogen evolution reaction.” Materials Science in Semiconductor Processing, 121 (2021): 105432. [CrossRef] [Google Scholar]
  23. Akshatha, S., S. Sreenivasa, L. Parashuram, V. Udaya Kumar, S. C. Sharma, H. Nagabhushana, Sandeep Kumar, and T. Maiyalagan. “Synergistic effect of hybrid Ce3+/Ce4+ doped Bi2O3 nano-sphere photocatalyst for enhanced photocatalytic degradation of alizarin red S dye and its NUV excited photoluminescence studies.” Journal of Environmental Chemical Engineering 7, 3 (2019): 103053. [CrossRef] [Google Scholar]
  24. Ramkumar, M., C. Ganesh Babu, K. Vinoth Kumar, D. Hepsiba, A. Manjunathan, and R. Sarath Kumar. “ECG cardiac arrhythmias classification using DWT, ICA and MLP neural networks.” In Journal of Physics: Conference Series, vol. 1831, 1, p. 012015. IOP Publishing, 2021. [CrossRef] [Google Scholar]
  25. Kumar, CB Pradeep, B. S. Prathibha, K. N. N. Prasad, M. S. Raghu, M. K. Prashanth, B. K. Jayanna, Fahad A. Alharthi, S. Chandrasekhar, H. D. Revanasiddappa, and K. Yogesh Kumar. “Click synthesis of 1, 2, 3-triazole based imidazoles: Antitubercular evaluation, molecular docking and HSA binding studies.” Bioorganic & Medicinal Chemistry Letters, 36 (2021): 127810. [CrossRef] [PubMed] [Google Scholar]
  26. Rajesh, A., K. Gopal, B. Rajesh Kumar, A. P. Sathiyagnanam, and D. Damodharan. “Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications.” Fuel, 278 (2020): 118315. [CrossRef] [Google Scholar]
  27. Naik, Ramachandra, S. C. Prashantha, H. Nagabhushana, S. C. Sharma, H. P. Nagaswarupa, and K. M. Girish. “Effect of fuel on auto ignition route, photoluminescence and photometric studies of tunable red emitting Mg2SiO4: Cr3+ nanophosphors for solid state lighting applications.” Journal of Alloys and Compounds 682 (2016): 815-824. [CrossRef] [Google Scholar]
  28. Naveen Kumar, Rangaswamy, J. Suresh Goud, Pudhari Srilatha, Pattasale T. Manjunatha, S. Prasanna Rani, Raman Kumar, and S. Suresha. “Cattaneo-Christov heat flux model for nanofluid flow over a curved stretching sheet: An application of Stefan blowing.” Heat Transfer 51, 6 (2022): 4977-4991. [CrossRef] [Google Scholar]
  29. Vallabhuni, Rajeev Ratna, G. Yamini, T. Vinitha, and S. Sanath Reddy. “Performance analysis: D-Latch modules designed using 18nm FinFET Technology.” In 2020 International Conference on Smart Electronics and Communication (ICOSEC), 1169–1174. IEEE, 2020. [CrossRef] [Google Scholar]
  30. Dhanalaxmi, B., and G. Apparao Naidu. “A survey on design and analysis of robust IoT architecture.” In 2017 International Conference on Innovative Mechanisms for Industry Applications (ICIMIA), 375-378. IEEE, 2017. [CrossRef] [Google Scholar]
  31. Nikam, Pritam B., Jayendra Kumar, V. Sivanagaraju, and Achinta Baidya. “Dual-band reconfigurable EBG loaded circular patch MIMO antenna using defected ground structure (DGS) and PIN diode integrated branch-lines (BLs).” Measurement, 195 (2022): 111127. [CrossRef] [Google Scholar]
  32. Vallabhuni, Rajeev Ratna, Jujavarapu Sravana, Chandra Shaker Pittala, Mikkili Divya, B. M. S. Rani, and Vallabhuni Vijay. “Universal shift register designed at low supply voltages in 20 nm FinFET using multiplexer.” In Intelligent Sustainable Systems: Proceedings of ICISS 2021, 203-212. Singapore: Springer Singapore, 2021. [Google Scholar]
  33. Kishore, Somasundaram Chandra, Raji Atchudan, Thomas Nesakumar Jebakumar Immanuel Edison, Suguna Perumal, Muthulakshmi Alagan, Rajangam Vinodh, Mani Shanmugam, and Yong Rok Lee. “Solid waste-derived carbon fibers-trapped nickel oxide composite electrode for energy storage application.” Energy & Fuels 34, 11 (2020): 14958-14967. [CrossRef] [Google Scholar]
  34. Malagavelli, Venu, Srinivas Angadi, J. S. R. Prasad, and Subodh Joshi. “Influence of metakaolin in concrete as partial replacement of cement.” Int J Civil Eng Technol 9, 7 (2018): 105-111. [Google Scholar]
  35. Ashok Babu, Puralasetty, Javanna Latheef Mazher Iqbal, S. Siva Priyanka, Machana Jithender Reddy, Gaddam Sunil Kumar, and Rajaram Ayyasamy. “Power control and optimization for power loss reduction using deep learning in microgrid systems.” Electric Power Components and Systems 52, 2 (2024): 219-232. [CrossRef] [Google Scholar]
  36. Saritha, M., M. Lavanya, G. Ajitha, Mulinti Narendra Reddy, P. Annapurna, M. Sreevani, S. Swathi, S. Sushma, and Vallabhuni Vijay. “A VLSI design of clock gated technique-based ADC lock-in amplifier.” International Journal of System Assurance Engineering and Management 13, 5 (2022): 2743-2750. [Google Scholar]
  37. Pittala, Chandra Shaker, Rajeev Ratna Vallabhuni, Vallabhuni Vijay, Usha Rani Anam, and Kancharapu Chaitanya. “Numerical analysis of various plasmonic MIM/MDM slot waveguide structures.” International Journal of System Assurance Engineering and Management 13, 5 (2022): 2551-2558. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.